Counting matching models…
Update 05.01.2025: I finally got around to learn a little T-spline modelling. So here's Perry's fedora! The hat fits the body with his hair attached. --- Update 17.11.2024: Added a new version, that has another hole on top of the head to…
Printed mine in PLA .4mm nozzle and .15mm layers, 15% infill. There are three different designs to choose (plus a blank template). More might come when the inspiration kicks but you can also easily create your own design using the…
The 3 part design makes for an easy assembly and a clean look without visible screws. I also designed a version to fit two jacks. However I did not need one yet and haven't bothered printing it. You will need the mirrored frame for the…
A replacement for the outer part of Mepal “Campus” lunchboxes, that seem to break quite easily at the opening mechanism (which ultimately is not necessary). Easy print, no supports required. Printed mine in PETG, 0.6mm nozzle 0.3mm…
A stand for maintenance, display, storage of your 1:18 LaTrax rc-cars. It takes the weight of the tires/shocks during storage preventing fatigue over time. Printed mine in PETG, 0.6mm nozzle 0.3mm layers, no supports.
A tray that organizes one embosser and three set's of rollers. Printed mine in PLA.
Not actually a functionally necessary part. You can totally live without one, but it was a nice little 3D design training project. Printed mine in PLA, 0.6mm nozzle 0.2mm layers. Fits snug and secure. Wife loves it, which is important for…
A big knob to replace the crank handle from the original model, as I found that one tends to bind up. It clips into the lower two parts provided with the original. It's that big to give the same mechanical advantage, that the original…
When buying a new set of indicators (at least the front ones), those now contain white plastic reflectors inside the housing, which my original GDR-ones for the back of the moped didn't have. So to calm my inner Monk, for the sake of…
I liked the original model and figured I'd print a batch for me and my colleagues, but wasn't very keen on having to add about 300 threaded inserts to roughly 40 cases. Added the "clippy feature" so everyone can customize their cases with…
Guess I have to call it a remix of the salt dispenser from “Bad Reichenhaller” as this is what brought the inspiration. Ours was overdue for a replacement so… It took some trial and error for the fitment of the swiveling part of the lid…
As far as I'm concerned, it's a much nicer / cleaner looking alternative to the original pricy options by supernova. It attaches with cable ties. the curvature is sized to allow a piece of old inner tube to be placed between the seat post…
All my prints were done in spiral vase mode with a 0.4 nozzle and 0.15-0.2 mm layers. with 4-5 bottom layers. I used 3DJake's "ecoPLA Neon Orange" and "mattePLA Light Green" of which the Orange came out with the better print quality (and…
Another remix I found for the cam3 did not fit being too tight around the camera. So I whipped out the calipers and designed another version with a few tenths of a millimeter more wiggle room. Printed mine in PLA, .4mm nozzle, .2mm…
A Strong/thicker version of the Samla box lock clips. Mine were printed with these settings: 0.6 mm nozzle 0.3mm layers 3 perimeters brim enabled (the uneven layers resulted from a dirty z-axis lead screw)
It's a deeper (or higher?) box and two additional inserts for a charger, more tips and heat insert accessories. Also added "stops" at the hinges so the lid stays nice and parallel when opened. The bigger insert is designed to specifically…
Backpack / Rucksack for a Nintendo Switch (v2) that holds up to eight game cartridges. When not clipped to the handheld, it will serve as a “display” stand. the cartridges are a friction fit. I made sure that it wouldn't restrict any…
I took inspiration from https://www.printables.com/model/247627-wall-holder-for-7-piece-hazet-hex-key-t-grip which works fine for the hex-keys but does not fit the matching Torx set, with it's different handles and key sizes / diameters I…
Yet another version of the soldering iron stand matching the case made by PjotrStrog . This one is made to fit an M3x16 socket head screw and nut. I also added some indexing edges for the bearing to stay centered. Lastly a shoutout to…
Locks the position/setting of the volume knob while still allowing to use the factory headset. Printed mine in PETG, .4mm nozzle, .2mm layers, 3 perimeters, 30% infill
I took inspiration from this model: https://www.printables.com/model/1730629-tissue-box-holder-tray However, that one is fixed in size and wouldn't fit the boxes available in Germany. Also I didn't like the fact, that its picture is an…
Since I designed one for the Torx keys, I did another matching one for the hex key set as well. I'm still quite happy with the precise fit. \_(ツ)_/ Printed it in PLA .4 nozzle - .2mm layers - 3 perimeters - 15% infill
These are all currently available results.
