Counting matching models…
Kind of looks like a mini world turtle when you put some plants in it. Remixed from https://www.thingiverse.com/thing:2641994 but I added in a drainage hole and split the model into parts so it's more easily printed with the parts that…
Darthwolf's clips are a great idea, but for me they just loosely sat in the laser bed and didn't really do anything. Instead, I've redesigned it with wedged feet so that it squeezes in between the slots and can hold a piece down. EDIT…
Meant to be used with a PTFE tube and a compression fitting, makes it so that the filament can be pulled by the extruder, but doesn't go back and unwind the spool when the toolehead is returning to home. If you don't want the unwind…
Only the blank version.
Koprov's original linker was great, but didn't quite “snap into place”. The V2 requires screws to lock into place, and I wanted to be able to put the connector in from behind so it's not as obvious. I printed this in PETG at .2mm height,…
Takes a 8x3mm neodymium magnet in the top of the thumbpad (I just had some laying around, but these should work: https://a.co/d/iS8znQm). Split into 2 parts so you can print without supports (note: the collar should be printed with the…
Adapter to make the spool arm vertical instead of angled. Allows for mounting spools inside an enclosure, without interfering with the build volume. BOM: 2 m4x10 bolts 1 m4x12 bolt Link to the filament arm:…
The original model provided by ZSA is a great starting point, but isn't printable, and was quite a messy mesh (and it had tons of unnecessary/invalid triangles). I've cleaned it up to a step file that should be quite a close replica of…
Replaces the right thumb cluster with a trackball running a PMW3360 sensor on an arduino-based MCU. Connects to the keyboard directly via the original ribbon cable, no external wires to connect, and the keyboard (with trackball) is just…
A mount that clips into the trim on the back left side of the Model S trunk. Modeled to clip into the 2015 Model S, it should fit right between 2 ribs in the trim, you can feel underneath the trim to find the position. I'm not sure if…
Meant to be used with a PTFE tube and a compression fitting, makes it so that the filament can be pulled by the extruder, but doesn't go back and unwind the spool when the toolehead is returning to home. If you don't want the unwind…
When I upgraded my thermostat to the 2025 version from the old gen 2 version, it left a big hole behind. I didn't want the large rectangular footprint of the later versions, so I made this small circular one that is just large enough to…
Holds the charger (oval shape) for the Braun Oral B toothbrush in an inverted direction so you can plug in your toothbrush over the sink and have all the water drip into the sink instead of pooling up gross toothpaste scum on your…
I've made a new version with 3 joysticks. My current usage of the 3 joysticks is to control Autodesk Fusion 360 in conjunction with a custom add-in script . I've also never quite been happy with drag scroll, so now one of the joysticks…
I wanted to be able to make the timelapse videos of my prints, but I don't want to have to spend the time moving the bed into position for a shot, nor do I want to have octolapse messing with my gcode after I've checked it in my slicer. I…
A mount to attach your raspberry pi v2 camera to the toolhead of your Snapmaker . This allows you to aim the camera directly at the extruder nozzle so you can closely inspect layers as they go down to ensure no problems. Mounting hardware…
Tried to create as accurate of a model as possible for building any mounts/designs around the laser toolhead. I checked the screws on the back and I think they're mostly in the right positions, if anyone has a DXF of the actual mounting…
Combine all the plugs for your macbook into a single mega-plug to make it easier to plug and unplug your computer, saving you at least seconds every day! Designed/tested on a macbook pro 16", but it should work with others if they have…
Cut files for noise reduction foam for the top of the Moonlander keyboard. I cut this using the Snapmaker 10w laser cutter with Lightburn. Cut settings were speed 1800mm/m power 90% passes 1 This cut setting worked for 2 types of foam…
Thanks to @ericsnis for doing all the original measuring of the hook. However, their model was too (almost) perfect a recreation of the injection molded part. I redesigned it to be more 3d printable, while also changing the mounting…
Swap out the right thumb cluster on the ZSA Moonlander for a Pimoroni trackball . Code and full BOM for using this available on the Github repository . Note: The holes are all designed to reuse the screws (both the bottom ones and the…
I plug/unplug my keyboard at least twice a day, and was a bit worried about the plug on the keyboard wearing out with use (I've seen it happen to other USB-C devices). I created this “protector” to house a USB-C extender that can act as a…
I wanted to be able to make the desk skirt wrap around the side of my desk (I have a corner desk). This replaces the T connector between 2 sections to be a 90 degrees instead of 180. This was designed for the Vivo Desk Skirt 60 , but it…
These are all currently available results.
