Counting matching models…
A tri-bahtinov mask with hinges to be foldable and use less space. The Mask is designed for celestron C8 (and tested on a vintage one). I've created 3 versions: 1 for the C8 with the secondary mirror holder of 66mm of diameter (tested on…
I modified in Fusion360 the cases obtained from a customizable phone case (see other ddesignes) so to obtain one that fits really well. I've made it think enough to protect the cameras. I've uploaded two versions, one "clean", one with an…
this is a dove tail support for vintage celestron C8, to enable easy and fast finder connection and exchange. a M4 bolt (both screw and nut) is needed as it fixes the finder. I suggest to print it in PETG or ABS (I use PLA only for home…
its the central differential gear for kyosho dbx i've printed in petg with 100% infil, it works since a couple of months without issues (as the dirty pictures show :-) ) Print Settings Rafts: No Supports: No Resolution: 0.15 Infill: 100…
Vacuum adapter for Zwilling boxes and Laica Vacuum machine, to be made in TPU Two versions are available; V1 is to be printed the top side on the plate. To keep it more "sealed" it's a good idea to put some glue on the "gaskets" and make…
this knob has been designed to enable easier and more accurate focus for vintage (orange) celestron C8 tubes. it requires a M3 screw longer than 15mm to secure it better to the original knob. Print Settings Printer Brand: Creality…
This is a small and flexible Z-Belt tensioner; for the knob and the screw, refer to: https://www.thingiverse.com/thing:2854971/files this project has the screw for different pulleys and is very well done. I've designed two bodies; a small…
I've modified the part from Ivango2 to: balance better the load, so all goes on the carriage bolt and not on the flange make it compatible with M8 bolts (metric standards) To mount it you have to disassemble the lower carriage wheel and…
simple knobs to assemble the vintage tripod without tools 30 07 2023: added a shorter version of the telescope base as the normal version is a little too long for some of the users. Print Settings Printer Brand: TEVO Printer: Flash Rafts:…
This is a modification of https://www.thingiverse.com/thing:657385 (thanks gregorycerna!) to act as the support of a table lamp. I've added a wedge to close it on the table. Take care of the size of the holes; resize the volcano to fit…
Description: This is the 79mm filter; for 105 go here: This is a modular 3D printable solar filter holder designed for DSLR and mirrorless camera lenses. The design consists of two main parts: Base Top retaining ring Together they…
Description - This is the 105mm filter; for 79mm the link is here: https://www.printables.com/model/1796737-universal-3d-printable-solar-filter-holder-for-cam This is a modular 3D printable solar filter holder designed for DSLR and…
A simple pressino (pusher) for moulinex cooking robot I have done two dimensions; 11cm (short), which is slightly shorter than the neck as the "original" one; the second is 12cm, so it reaches the end of the neck. Print Settings Printer…
The damping works at its best if you have both the damping feet and a foam (like the one from the tarantula shipping box) under it. This way the vibrations transmitted to the base is really limited. I've added the possibility to adjust…
Customized version of https://www.thingiverse.com/thing:5719286 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=5719286 Instructions Using the following options: flake_font = MrDafoe-Regular flake_s = 30…
I've designed this simple part to mount the 3DTouch bed levelling sensor into the Tevo Tarantula PRO. It's working well, can be used with a single longer screw or two short ones. As in picture, I've wrapped it as well as the BLtouch under…
I've designed this clip as I'm getting mad as glasses always get foggy when I wear an FFP2 mask (currently mandatory in Italy in many places). These are clips designed to be printed in TPU also from Bowden printers. The design is thought…
as some BLTouch are shorter than others... these are spacers with the right dimension for the Eryone thinker S sensor holder. I'm using: https://www.thingiverse.com/thing:4636285 Category: 3D Printer Parts
connector for lithium batteries such 18650 or whatever with a diameter around 18mm. It's a very simple design, but... when you have batteries without the top tip… it's often useful. print it and wind up some copper wire around the central…
Customized version of https://www.thingiverse.com/thing:3159175 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3159175 Instructions Using the following options: string = Sinistra tag_length = 35…
it's the nice design from dapostol73, but for a 6mm center screw as for most of the V bars. Print Settings Printer: eryone thinker se Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: 3D Printers
this is a mouth of wolf cover, to avoid full rain into the window it has to be mounted with plexiglass plates; it's possible to adapt it to different dimensions. be careful.. it's a big thing to print! Print Settings Rafts: No Supports:…
These are all currently available results.
