Counting matching models…
Some parts I did for enhancing my Ender-5 Plus when doing the direct drive upgrade. Cable guide A fixation for the extruder cables. Needs a M3 x 6 counter sunk screw. Z-screw fixation The Z-screw holders need four M4 * 10 countersunk…
This is a simple wall box measuring 80mm x 80mm for the Shelly Plus 1PM to be wall mounted. Two M16 or PG9 cable glands can be fitted for cable inlet/outlet. For screwing the lid onto it use 4 x M3 x 8mm counter sunk screws. Included also…
Did a quick OpenSCAD script to generate a simple pressure advance calibration tower for Klipper firmware. I had to add a part of a cylinder at the back as Prusa Slicer 2.5.0 doesn't place the seam in the middle when you choose “back”. So…
The official Dual-Z upgrade kit requires you to relocate the PSU to the back. And as I wanted to replace the old PSU with the LRS-350-24 PSU from Meanwell, this asked for a redesign (o; It is advisable to have a protective ground cable…
I know there a donzens of those Samsung T5 SSD holders available for the Blackamgic Design Pocket Cinema Camera 4k, but I thought I give it a go. Biggest difference: SSD can be slided in and snaps with the back latch, so the supplied…
As I recently switched to Mac Mini M1 I still wanted to use my BluRay drive from the older PC. So I bought the Icy Box IB-550StU3S enclosure and just removed the electronics to be placed in a printed 3D design. Also I needed another SATA…
As I installed a hotbed carrier frame supporting 4 sliders I did a quick design for offsetting the Y limit switch to the back. I use 2 M3x6 press nuts and 2 * M3x6 screws for mounting the limit switch onto it. You can reuse the M3x8…
For developing touchscreen apps with Kivy/Python I needed to have a simple stand for the official 7" screen so it is better readable when upright. The feets have a cutout which fits onto the back for mounting with a M3 x 5mm screw.…
These are all currently available results.
