Counting matching models…
A simple funnel for 49mm baskets that are used by the Olympia Cremina or older La Pavoni models. The funnel sits well on my 14g baskets without the need for magnets. It allows for WDT and tamping for minimal mess in the kitchen :) Printed…
Two part rear fender mount for Cannondale Topstone Carbon. The upper screw mount should be quite universal for different fenders, while the lower clamping mount is specific to the SKS Velo 42 Urban Fender that I reused from an old bike.…
A simple design that allows a standard 120*120*25mm PWM fan and ducts with a total thickness of 30mm to be mounted with only 2 screws. Required Parts One 120*120*25mm PWM fan One printed fan mount with your desired angle. The pictures…
Simple gnocchi plank. Removed the cut triangular shapes on the side and reduced the base thickness to speed up printing and use less material. It is printed as a solid now. Printed on Bambulab A1 in PETG. 0.2mm layer height.
A spacer to move the saddle bag further back in case your legs are touching it. Also features a quick release mechanism compared to the double velcro that my bag is using. Designed to attach to a 27.2mm seat tube, secured with 3x 5mm zip…
Toptube storage box for Cannondale Topstone Carbon. It uses the existing bottlecage style mount (M5 Screws 65mm apart) and follows the toptube shape. It has plenty of clearance to the steering tube that could be used to increase storage…
Added an XT60 Connector instead of hardwiring it. See @sternli27 original model for the other parts needed. Printed on Bambulab A1 in PLA, 0.2mm Layer Height.
Gripshift Handles for older Shimano Shifter that I designed to replace the broken rubber handles. The shifting mechanism has 12 teeth to lock onto on an 31/28mm diameter. The model parameters can be changed in the spreadsheet. I added…
Use the .3mf as the .stl does not have the banana plug holes and vents. I remixed it just in the slicer, not knowing that it can't be exported with the negative parts applied. Printed in PLA with default 0.2mm layer setting on Bambulab A1
Another camera clip holder as the existing ones did not fit my old backpack and smallrig plate on the camera. The camera easily slides in from the side and can be released quickly. It holds onto the plastic clip of the chest strap and is…
Very simple tamper base station for the 49mm & 51mm naked-portafilter for Olympia Cremina and La Pavoni. It has just enough height to clear the portafilter handle from the ground and keeps it level even when not filled. Now parametric…
Small case to house an Arduino Nano V3 running a Simhub Windsimulation sketch. The protoboard breaks out ground and the 3 PWM signals to the 4-Pin fan connectors and connects an external 12V powersupply. I used these headers…
New base for the portafilter from naked-portafilter.com for the 49mm La Pavoni or Olympia Cremina. I use it with the 14g precision basket with 22mm depth. I needed to cut the needles to a total of 40/50mm. Printed with PETG on Bambulab A1…
Small Clip and Holder for Headlamps on Helmets. Printed in PETG and used standard adhesive tape to fix on the Helmet.
Mounting shell for Pixel4a with a slim Spigen case. Needs to be glued to the mounting spacer. Finger print sensor is still accessible. The top clip broke off easily in my first version, so I included a repair clip. Printed in ABS on…
Adapted the parametric case and made the insert to be glued in place. Holds the USB charging cable as well. Printed on Bambulab A1 with PETG, 0.2mm layer height.
Design for my setup with Profile Design aerobars. I wanted to put the light at the top so it does not get soiled so easily during the winter months. Also it is close to the power bank in the bag below. Secured with 4x5mm zip-ties,…
These are all currently available results.
