Counting matching models…
A super minimalist succulent planter tray, to help protect your flat surfaces from occasional water droplets. The flat on the inside of the tray is 53mm in diameter. Source files are included, please modify if you feel the need!
Most of these files are from others' admirable efforts , please check out the remix links for the originals. I renamed, translated, reoriented and collected various model files from various projects into singular project (please see all…
This models allows you to mount a PC4‑M10 PTFE coupler above your Sherpa Mini (which is a bit loose normally) which fixes the bowden tube in place above your extruder. The PC4‑M10 coupler must be M10x1 threaded to match the threads in the…
Keep your workspace clear of water rings in style, with this hexagonal Voron logo infill coaster! These are very easy prints, which clock in between 1 hour and 1.5 hours even on fairly slow printers. The coasters are great ways to use up…
Dad asked for another one of his favorite watch tool and parts trays, so I created this fairly simply model for his desk. This model will keep various long objects and watch related parts from rolling around your desk: objects like…
v2: Added a version of the bowl which prints better on printers with less overhang cooling ability, please use this if you're seeing printing artifacts. --- A small bowl to hold vitamins, medications, pills until they can be firmly…
I didn't have the magnets from the original design, so I modified it to take 6mm x 3mm/2.75mm magnets. Generally, when you purchase 6x3 magnets they are closer in size to 6x2.75, so please adjust the holes to 3mm if your magnets are true…
Included are two models (loose and tight) and the source .step file. The loose file is a better fit for rigid filaments like PLA/PETG/ABS/ASA so the remote can be removed from the stand. The tight model is useful if you want to keep the…
Easily store 1 to 6 (or more - if you can get long enough screws) build plates of any size on any vertical or horizontal surface. The clips provided use #8 screws (with most head types), but if you have any interest in using the system…
A sample coil master spool which easily splits in half to allow for loading of sample coils. The master spool uses 6mm x 3mm magnets (actual depth sized for 2.75mm magnets). Generally, when you purchase 6x3 magnets they are closer in size…
I designed this simple vertical (above or below) holder for my Voron v2.4, it uses M3x6mm socket head cap screws and M3 t-nuts. Thermometers/Hygrometers were purchased from Amazon here . I recommend setting them all in a box and…
A case for 3 step bits, fitting the 3 most common sizes (actual bits are Neiko 10181A). Sizes are: 13 step drill bit (1/8" -1/2") 6 step drill bit (3/16"-1/2") 12 step drill bit (3/16"-7/8") The case features two locking dimples on each…
---- Further testing in progress, sometimes it detects runout incorrectly - hold off for now ---- A passthrough filament sensor for the Prusa Mini+ which is mounted in place of the stock extruder in direct drive setups. I recommend you…
Sheath for the Mitutoyo 182-207 (150mm/6") steel rule - or similarly dimensioned rules (12.05mm x 152.45mm x .40mm). Non-affiliate Amazon link: https://www.amazon.com/dp/B0002795AM One model for PLA/PETG/ABS/ASA , this design was intended…
Here are some fairly simple chopstick rests I put together for the 'Chopstick Holders' contest. Each of the six models should print with less than 2g of filament using normal print settings. All of the models are already oriented in their…
The Tukkari TS enclosures are missing a thermometer/hygrometer mount like the TF enclosures, so I designed this bracket from the Tukkari STEP files to require no additional holes. This bracket should work on any of the Tukkari TS…
Fysetc 3030 series slide-in t-nuts with M3 threads (also commonly available on Amazon under uxcell brand) are slightly larger than the spec nuts for the Mini+. I remixed the MINI-z-bottom part to have a larger gap between the extrusion…
A small cleaning station design used to get small wisps off of tricky filament when making Toys for Tots Offroaders . Print the brackets (and attach them to a piece of wood, or attach them to another model of a block which you can weigh…
I purchased a 100g pocket scale to weigh filament samples and needed a way to extend the scale's plate to work with them. The cross tray expander sits on the top of the built in plate and positively indexes against the sides to prevent…
These are all currently available results.
