Counting matching models…
This is a 2040 or/ and 2020 extursion mount for the Waveshare 4 inch HDMI LCD Touch Controller ( https://www.amazon.de/gp/product/B06ZZWT3N8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 ). I use this case for a Raspberry Pi 3B+…
This is a small electronics case for the SKR E3 mini v2 mounted on an Anet A8. !!!Needs M3 threaded inserts for mounting the case cover!!! SD card can be inserted from the top. Case includes recesses for five 2.5mm wire and 1mm thick…
A case in which you can put your cotton pads so they don't get smushed in you baggage. I made two versions. One with 6cm and one with 10cm height. Edit: added v2 with less thread on the bottom part. It's therefor faster to close the case.
A rod connector for 8mm wood or metal rods. Two of the connectors have on hole which goes through the connector. I used them to build a water bottle rack. No supports needed
I had problems when it came to tightening the dremel with MarkusGris Dremel Mount, because the parts kept braking as of suboptimal print orientation. That's why I designed a two part modular mount. Materials needed: 4x M3 nuts OR 4x M3…
I changed the design by capella_ben by removing the clip joint and replacing it with a M5 screw, as the clip kept braking. I also made a small recess on the top part to keep rubber bands (which I used) in place. Category: Household
Remixed the extruder fan mount from the "E3D-V6 Bowden Carriage Mount for 2020 V-slot X-Axis" design to be used with the (also remixed) E3D-V6 cooling duct ( https://www.thingiverse.com/thing:4254210 ). When assembling the carriage mount…
I printed it in Petg. Other materials should also work. Can be printed without support.
This is the mounting plate for a FHT 8 thermostat.
This replacement part needs to be printed with a resin (SLA) printer, as it needs to be water tight. Last winter, the water pump in my camping van busted because of some left over water in it. After a friend of mine got a resin printer, I…
I remodeled the case from Michael's youtube video ( https://www.youtube.com/watch?v=Q4TrzshXV10&t=314s ) on upgrades regarding the CNC3018 router. I used the smaller high/ low relais from amazon (…
I created this adapter to be able to use the Hero Me Gen 5 on my 2020 x-axis on a Creality extruder backplate (link below) whereas the belts run horizontally and not vertically. Mount the bottom parts of the adapter using cable ties. Edit…
I was frustrated with the hygrometer always being hard to find & see inside the vacuum bag when checking values. That's why I designed my own. Does not stay in the filament spool by itself! Is held in place by vacuum bag. Verified with…
This is a monitor mount for the Creative Live! Cam Optia webcam. You need: nut which was used for mounting the Live! Cam Optia on the original mount M3 nut M3 ~10mm bolt Use support blocker for the cable tie slot to be usable. Your…
These are all currently available results.
