Counting matching models…
I created this modular drawer organizer to maximize space in my drawer as compared to a store bought one. The total length was too long for my ender 3 print bed so each tray is split in half and joined together using a piece of 1.75mm…
I made this little guy to keep me company at my desk. It prints using minimal organic supports. The arms themselves print well at 0.15 layer height but the hands benefit from some support. Printed the planter using marble PLA and the seat…
I modeled this plier holder for a standard pegboard. I was having issues with existing holders not sticking well to my print bed so I added a connector between the main body and the end of the two pegboard hooks. Just snip this connecting…
Needed a keychain for my zero turn mower. Enter this simple two color print to get the job done. 4/11/2025 - I've added two new models that increase the height of the mover design.
Cutter holder for the Ikea Skadis pegboard using the t-clip system. Modified so the clip is visible to match the design language on the rest of my mounts/holders. I printed this at 0.15mm layer height with no supports.
Straight forward caliper holder for the Ikea Skadis. 02/18/2025 - Added 5 additional STEP files that move the right arm down at 1mm increments to accommodate various calipers.
I wanted a simple mount for my Buddy3D camera that keeps it “attached” to my printer so I made this. It clips into the aluminum extrusion and raises the camera up enough to see the first layers well. You can use a t-nut to secure this but…
I made this shaft lock insert that can be inserted into a lacrosse shaft with worn out screw holes to help secure the head to the shaft. I printed mine out of PLA and it worked great. Can be removed with a corkscrew if needed.
I made this top and bottom sheet holder to attach 4 sheets to my Ikea Skadis. I made it so the sheets stand sideways so that I can see the name of the sheet I want to grab from the side. You could probably use just the bottom part but the…
Simple spray bottle holder. I printed this using 0.15mm layer height with organic supports. It would probably print well enough without supports if your bridging settings are dialed in.
I ordered a set of tweezers from Amazon and they're great. They came in a leather (pleather?) pouch which was nice but for me it took up a little to much room so I made this compact holder. Link to tweezers. Printed both halves at once…
I needed some extra room in my spice cabinet and I wanted to keep my smaller bottles where they could be easily accessible. So I came up with this holder that is easily mounted to the cabinet door using 2 or 3 adhesive strips. The bottles…
I really liked the improvements that @firetech made to the original @Yosuke design for these squash ball feet but I didn't like that I needed hardware. I found the remix by @TChucks but there was only one height included. As described by…
I made these containers to hold pills and powder that I use for my dogs. They have double lead thread for the lids so they unscrew quickly. They can be scaled to whatever size you need in your slicer. One version is a larger container…
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
I modeled this Skadis holder for the Shokz Open Run Pro 2 headphone case. Uses the T-Clip System . I printed at 0.2mm layer height with no supports using Elegoo Matte PLA.
The bottom of our soap dispenser is concave and always traps water which gets gross after a while. This print holds the soap elevated off the counter and allows the water to dry. The feet of the holder are printed separately and are…
USB holder for the Ikea Skadis pegboard. Print with the T-Clip piece flat on the print bead and the USB holder face down so the bottom of the holes are bridges. I used PLA, 3 walls, 10% gyroid infill.
This adapter allows the use of Atoma diamond plates in the Shapton plastic bases so you don't have to buy a separate plate holder. I printed with PETG but I'm sure PLA would work fine. I did 3 walls with 0.2mm layer height.
These are all currently available results.
