Counting matching models…
This is a wall, shelf, stud, or other vertical surface mountable hook. It is designed specifically to hold 1.5" vacuum hose for workshop power tools and dust collection, but can be used for many things including garden hoses (if drained)…
This is a remix of ShapeLabs's track saw hose deflector design, which was then updated by Mak-E-Verse and made compatible for Makita tracks/rail guides. Both original designs are based off of the Festool FS-AW available for their rail…
A pretty run-of-the-mill desiccant container. Remixed based on Tenshe's design because the 2mm silica gel beads were too small and fell through the top and bottom holes. I also didn't need the space for the hygrometer, so I was able to…
My Ender 5 was missing an end cap, so I designed this from an existing part to replicate it as closely as possible. Enjoy! Category: 3D Printer Parts
This is a citrus juicer that is designed to fit into a standard 2-cup glass Anchor brand measuring cup. My wife was annoyed with juicers that didn't have enough of an "edge" to release the juice from her citrus, so this one has sharper…
Stand I designed as a remix from similar designs by momomona and tavsanoglu, for the moon i printed from the (amazing) design by moononournation. I wanted to print it as a single piece instead of three pieces in momomona's design, and I…
I designed this splitter to work with 2.5" standard shop-vac friction-fit hoses. This has one female inlet and one each male and female outlet. This specifically fits the configuration I have for my miter saw dust collection system.…
This is a dual-extrusion / multi-color remix of mrmacnology's outstanding design for a snap-in cover for the Makita 18V X2 (36V) LXT Brushless 6-1/2” Plunge Circular Saw, model XPS01. The cover body is identical to the original design, I…
Designed a dust collector/extractor assembly for the DeWalt DW6184 fixed router base commonly used with the DW618 router. Uses (2) 1/4-20 x 4" screws and wing nuts to attach the two halves. This design does reduce the maximum extended…
This is a remix of Penobscot's outstanding iPhone mount design. I added v-slots to the mount and v-posts to the back of the phone holder to allow for rigid assembly. With supports, I was able to print a great looking 2-piece assembly with…
I've had a Shop-Vac brand 12 gal wet/dry vacuum for years. It's a great vacuum with one fatal flaw - the latches that fasten the lid and motor onto the steel canister. They don't have enough tension to keep them in the latched position,…
This is a snap-together shroud/spacer to allow for filament drying in the OSTBA 240W Digital Food Dehydrator: https://www.amazon.com/gp/product/B085QKT3V4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 There are several other good…
Designed some simple kayak paddle drip stops, designed to print in a flexible filament like TPU. The bore is 1.13 inches, which fit my 1.14 inch paddle shaft with a perfect balance of grip and adjustability. Print with low infill for best…
Very simple model used for blacking out the meter on the Olympus 35 SP 35mm film camera. Not designed to be pretty, but it's functional. It leaves the rangefinder patch, bright lines, and meter window unblocked so you can still see those…
Camera case for a pi cam with IR blasters. Took inspiration from the great setup that kevinlo designed, however this was designed from the ground up to exactly fit my model of the pi cam, link to Amazon below. This model of the pi cam has…
Side-by-side dual extruder mount that fits on an Ender-5, or anything with 2020 or 2040 and 42-40 extruder steppers. I took the geometry from VincentM's damper as a starting point. I printed just the mounting plate first, then realized…
This is an all-inclusive extruder mount for the Bondtech BMG-X2 dual direct drive extruder on a Creality Ender 5. This fits the BMG-X2 model designed for the 18 mm c-c version of the E3D Chimera hotend (including the TH3D Tough clone),…
Quick modification to the inner lock ring of svideo's great DeWalt AirLock compatible twist-lock fitting. You must print the other two components from the original Thing files. The original version is designed for certain models that have…
This is a simple stand that you can use to replace any standard decora-style outlet cover or wall plate. It will accept an apple watch charger, it has a slight press fit to keep the charger seated. It will also support a phone and has…
A variety of garden veggie markers or labels. Enjoy! Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: .2 Infill: 40% Filament: Hatchbox PLA White Notes: PLA won't stand up to extended outdoor use,…
Remixed the great design by svideo; this version has a 90 degree bend. The bottom is flat to allow for printing without supports. Category: Tools
Remix of Leetspeak's excellent Raspberry Pi Official 7" Touchscreen case mounting arms. Per the original design, you have to assemble the mount by sliding it onto the end of a 2020 or 2040 extrusion. I didn't want to disassemble, so I…
Fixed some model errors from the outstanding Ender 5 electronics case designed by Michael at Teaching Tech. If you've printed that model (as I did) you would realize that the left hand cases don't screw together as the screw bosses are…
This is a pad that sits on the TEC folding cup holder for the BMW E39 5 series. I found that my preferred travel mug was slightly too large of a diameter to sit completely down in the cup holder. Print this in TPU and it will create a…
Remixed the 4B case lid by Jacaeiro, remixed from the original by luc_e, to include a pass-through for the Pi Camera ribbon cable. No other changes - enjoy! Category: 3D Printer Accessories
These are all currently available results.
