Counting matching models…
Push-in eyes for crocheting characters and toys Different models allow multiple combinations to display various emotions (see pictures) Eye diameter: 10mm Print notes No supports needed If there's not enough adhesion during printing it's…
Print notes No supports needed Printed in 2 halves that should be glued together Experiment with top surface pattern to get the best results (I used Octagram Spiral) Smaller nozzle is beneficial for details Silk filaments make it shiny…
A simple holder for watch dials Print notes No supports needed 0.2 or 0.4 nozzle This model requires a careful consideration about XY hole compensation setting. For me a value of 0.2 worked for 0.4 nozzle on Bambu Lab A1 mini Updates log…
Bambu Lab A1 Mini Spool Extender This is an attachment over the default spool holder allowing to fit bigger spools Fits spools of 100mm in width Can be useful to mount a spool extended by a spacer Additional parts list 2 x M3 10mm screws…
Watchmaker's inspection block, useful to check out state of pivots and wheels teeth. The height is matched for Bergeon 4040 movement holder, so there's no need to refocus microscope. Print notes: No supports needed Top layer ironing is…
An organiser for crochet hooks with rubber handles. Supports 2 kinds of crochet hooks sets: 9 hooks (2-6mm) 14 hooks (2-10mm) Can be printed in about an hour (for bigger 14 hooks variant) Font used on the model: PT Serif Bold Print notes:…
This is a prototype of 3d printed watchmaking jewel press. It is functional, but depending on your resources you will need to source anvils/pushers for the press (buy/turn on a lathe). You can also print them, but they might be not sturdy…
A simple jig allowing to access and safely install or remove balance screw Adjusted to the height of Bergeon's movement holder so that there's no need to refocus microscope Print notes No supports needed Any material would do, but I like…
This is a functioning watchmaker's faceplate. It allows to precisely fix irregularly shaped parts to process them in a lathe. This one has M16 thread on the faceplate and fits Proxxon 150E lathe. I'm sure adaptations can be made to fit it…
Labello stick holder 2 models: single and double Print notes No supports needed Updates log 2024-10-14: Initial version released Support the author The model is free to use and published under CC-BY licence, however if you want to support…
This racket handle allows to explore, learn and create muscle memory for various hand positions on a tennis racket. This training is also applicable for other racket sports such as padel, badminton, pickleball, touchtennis and others. The…
These gauges for Proxxon 150E allow to move the axes with 1/100mm increments instead of the default 5/100mm. The gauges come with a set of adapters that can be easily installed to compensate for the bigger size of the gauges. Note that…
Loose ends in respirators can be annoying. Apart from this they can be very dangerous when used with rotary or other power tools. This print allows to keep the ends fixed. Wider clips attach to the lower strap, narrower ones to the top…
This is a holder for various PCBs allowing to contact specific places on the board being held. Might be useful for debugging Quartz Watches and other small devices. Additional parts needed: - Rubber O-rings: 4mm outer diameter / 1mm…
Holder for Remington RX5 shaver (for some reason, it's sometimes advertised as Remington XR1501). Probably should fit RX7, I think their heads have the same dimensions Tray part is provided in 2 variants: with and without the small brush…
A sturdy replacement for 15-inch Macbook Pro 2015 factory made feet The main load is distributed around the feet indentation and there's glue channels allowing to reliably attach the feet Print notes No supports needed TPU recommended,…
This block allows to attach an additional ring light to Eakins microscope The light is 6-inch diameter ring light (model N6238). The part is friction fitted into the microscope's frame. The light is attached by one M6 screw. Additional…
Sovol curing UV light stand The optional door component is attached to the mount and can be opened to access the contents The stand is friction fit Note: PLA handles UV-light poorly, it's recommended to use other plastics to print this…
This system allows a quick switch between 0.5x/1x/2x lenses for AmScope or Eakins stereo microscopes. Slightly twist the lens to unmount it from the microscope. Note that the lens is positioned lower with this system on, so that some…
A Klask game biscuit with characteristics very close to the original one. Uses 4x1mm magnets. Notes on magnets 3 magnes sizes supported: 3x2: untested, but should be close to original (this is the original magnets size) 4x1: tested,…
A simple lid for Heinz beans can This is not a tight fit lid but more of a cover. It should be possible to resize the model to get a tighter fit. This is an original model, however during publishing I found this one and wanted to mention…
A soft base for watchmaker's tools: Seitz Jewel Press and Boley Staking Set Print notes No supports needed Recommended material: TPU Updates log 2025-02-16: Initial version released Support the author The model is free to use and…
A simple jig to bend solid core wires for electronic devices prototypes. The shape allows for flat bends as well lifting the wires over some obstacles (e.g. THT components) Print notes No supports needed 0.4mm nozzle should provide enough…
A base and two screws holding the frother leg Support the author: The model is free to use and published under CC-BY license, however if you want to support the model author you can do it here: BuyMeACoffee link
Thermos TC bottle drying stand Print notes No supports needed Updates log 2025-01-11: Initial version released Support the author The model is free to use and published under CC-BY licence, however if you want to support the model author…
An organiser holding 2 TZ (TZe) Brother label maker tapes I use it to keep yellow (warning) and red (danger) tapes at hand Print notes No supports needed Updates log 2024-10-12 Initial version released Support the author The model is free…
A simple cover preventing Allen Keys cover from floating around in Proxxon 23080 case. Print notes Printed in vase mode with wall width of 0.4mm Updates log 2025-03-24: Initial version released Support the author The model is free to use…
Disclaimer: the author is not responsible for any damage or harm caused by malfunctioning of the stop button A bigger tactile emergency stop button for LaserPecker 4 (LP4) laser 2 colors can be printed separately and then inserted later…
A small spatula for positioning or removing lightweight parts without lifting LP4 hood. The hole fits tools holder on the side of the laser Print notes: - No supports needed Updates log: - 2024-10-11 Initial version released Support the…
An attachment for Proxxon 150E. Allows to use a cheap Wi-Fi microscope for part centering. There's a hole in the back where an optional 6mm brass insert can be pushed in for tilt adjustments. Support the author: The model is free to use…
Replacement rubber wheel for Bernina 807 bobbin thread winding This wheel is smaller in diameter than the original one. The reason for this is: I noticed that the full sized original wheel doesn't fully utilise the "over centre" mechanism…
A torque screwdriver for small torques. Compatible with 1/4 inch hex bits. You can also glue a small magnet inside of the hex indent to hold the inserts. The torque limit is adjusted by adding/removing TPU inserts onto the arbor. Once the…
A simple organiser fitting one Oral-B floss container and up to 4 small toothpick brushes. Printed in vase mode, uses less than 5g of filament. Floss compartment is wider to improve the model stability. Print notes Vase mode (0.4mm wall…
Replacement for 3M respirator inlet valves Some flexibility is needed, so TPU or a similar material should be used ❗This valve shouldn't be per se critical for the respirator operation, as the air still comes/leaves through filters.…
A motor cover for Proxxon FD 150/E providing more space for cutting operations Ventilation slits are provided The cover is attached with the original lathe's screws Print notes Tree support is recommended Updates log 2026-08-28: Initial…
These are all currently available results.
