Counting matching models…
Self-balancing bat, print in place and optionally glue the teeth on (as far forward as possible); have also uploaded a single tooth if you would like the bat to spin. Also included a version with a hole to hang the bat, should balance on…
Update: Fixed slope on top of cup holder to better print upside down; the original model has stringing around the inner rim due to the gradual slope. Original model is great, but needs to be larger to fit. The model in this post is 101%…
Looks a little sad (horns down) when you hold it up, but fun to fidget/play with
Larger box for Texas Longhorns. No supports, auto arrange or print with base down, lid top face down.
3d unicorn bead, for anyone who believes! Needs supports, at a minimum under the chin, to print correctly. My print looks smooth because I have a 0.8mm nozzle on right now, completely lost the low-poly effect…
UT Tower lamp with the number 1 and front clock cut out and lighted. Can use a tealight inside, make your own USB powered LED lamp (like this: http://www.aliexpress.us/item/3256806137191821.html ), or use the version of the base to set…
UT Tower lamp with the number 1 cut out. Can use a tealight inside, make your own USB powered LED lamp (like this: http://www.aliexpress.us/item/3256806137191821.html), or use the version of the base to set over a LED puck light (this is…
Small box for Texas Longhorns. No supports, auto arrange or print with base down, lid top face down.
A holder for artificial nails, to hold while painting or display afterwards. Use sticky tack, silly putty, etc to hold the nails in place. There are so many different magnet sizes that I included blank files without magnet holes, will…
Perfectly modeled to replace the tissue box holder in the lid of the 5th generation 4Runner center console. To remove the existing tissue holder: Release the bottom tabs from the tissue box holder using a pry tool (or really your hands…
Texas Longhorns Bevo Bead. Vertical or horizontal holes depending on your use.
A flat unicorn bead for anyone who believes! Raised details, would print great with multicolor filament, MMU, or filament swap.
Lid and base should print with any settings. The LED diffuser will help light the entire skeleton, print with a transparent filament, press fits into the lid. Probably scaleable but you will lose some detail in the skeleton. I have used…
Top and bottom print with usual settings. Model is scaleable, but tolerances are TIGHT; personally I printed the base 0.2% larger than the top, and depending on your filament you may need to print the sliders a fraction smaller (I printed…
I printed with a 0.8mm nozzle so had no infill, came out great in my opinion. Tolerances are tight, supports should hold any normal mug you set on it. Does not have hooks, so will only work sitting on the counter.
Includes pre-colored 3mf files, or use the STL files to color yourself.
Two Bevo pendants, both with 2mm holes through the horns. Split the objects in your slicer to print one or the other.
Fits into the drip tray holder, place the stock metal grate on top. Print with 0% infill, 3 or 4 walls, 0 top layers. Cuisinart Coffee Maker, Single Serve 72-Ounce Reservoir Coffee Machine, Programmable Brewing & Hot Water Dispenser,…
17mm ball mount, fits various phone/tablet/car accessories. With 14mm mounting hole for headrest. Made specifically for Toyota 4runner, fits any other makes/models with 14mm headrest mount. 3mf file includes custom solid infill through…
Using the wiring, the hole, and the wall bracket from an old whole-house intercom.
Use with something like this: https://a.co/d/72HRB4U The valve is pretty standard/generic, should fit the hole as printe
Objects included are just the basic shapes, adjust height to your desired size, then print as a box with the following parameters: 4 walls 0 top layers 4 bottom layers 0% infill
Made to secure a portable cup holder trash can in the back seat using bungee cords, could also be used for other cups, and can be secured by string, zip ties, bungee cord, etc. Current model opening has a top diameter of 88.5mm and bottom…
Didn't find any existing models that fit my application (running 12v cables for lights up the rails of a bunk bed) so I designed these. Model is only 5mm tall for clips, but I scaled to 200mm x6 to create a long cover. Mounted with 3M…
These are all currently available results.
