P
PrintablesCHARL13
Magic Wand
I needed a magicians wand for my kids dressing up box. Print Settings Supports: No Resolution: 0.3 Infill: 20 Category: Props
- Downloads
- 753
- Likes
- 63
- Rating
- 4.89
All models
Counting matching models…
P
PrintablesCHARL13
Simplify3d Extrusion Multiplier Calibration Cube
I made this because I needed to calibrate my extrusion multiplier and required a calibration cube with straight edges. I do this for each variant of filament (e.g. brand and colour) and for each layer height I need. I do this after I have…
- Downloads
- 382
- Likes
- 9
- Rating
- 5
P
PrintablesCHARL13
Netgear GS108 Multiboard Bracket
Brackets for mounting a Netgear GS108 switch to the Multiboard mounting system. You will need to print 4xHandsOnKatie_Standard-Underware-Connector from the original remix file library.
- Downloads
- 310
- Likes
- 54
- Rating
- 5
P
PrintablesCHARL13
Zigbee Rain Gauge
I wanted a rain gauge to plug into my Home Assistant for use with an irrigation system and found this guide: https://community.home-assistant.io/t/diy-zigbee-rain-gauge/255379/25 I didn't want to wait for the gauge body being delivered so…
- Downloads
- 134
- Likes
- 41
- Rating
- 0
P
PrintablesCHARL13
Medal of Dishonour
This is a bit of fun. Our office wanted a 'dunce hat' that people would have to wear when they messed up, so I came up with this medal. Think Flavor Flav crossed with Mo Farah. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill:…
- Downloads
- 89
- Likes
- 17
- Rating
- 5
P
PrintablesCHARL13
Moes TRV Battery Cover Retainer
An impact on my TRV broke one of the internal battery cover clips which meant it would no longer stay in place. I design this as a stop gap solution until I can replace it. Simply slide it over the top and ensure that the clips engage…
- Downloads
- 85
- Likes
- 9
- Rating
- 5
P
PrintablesCHARL13
3DQF Spool Ring
I love 3DQF filament especially as the spools are recyclable, but I found that the cardboard they're made from would deform easily and not work well with roller type spool holders. Print 2 of these, slot them on and you're away! Print…
- Downloads
- 75
- Likes
- 4
- Rating
- 5
P
PrintablesCHARL13
Venture Baby Car Mirror Ball Joint
My venture baby car mirror ball joint snapped so I needed a new one. Print this with the ball at the top and the flat face to the bed. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 30% Notes: PETG recommended…
- Downloads
- 65
- Likes
- 6
- Rating
- 5
P
PrintablesCHARL13
OpenAstroTracker Arduino Mega Box
I really like this box ( https://www.thingiverse.com/thing:4253325 ) but I had a different sized buck. I decided it would be easier just to have an empty space that I could hot glue bits into. Update 28/09/20 - Added buttons for LCD as I…
- Downloads
- 55
- Likes
- 4
- Rating
- 0
P
PrintablesCHARL13
Anet A6 Mainboard Case With MOSFET
I've remixed this ( https://www.thingiverse.com/thing:2450862 ) as it didn't quite fit my machine. Fan is optional. 4 x No.4 flanged screws (2.9mm x 9.5mm) for the MOSFET. 4 x original mounting screws for mainboard. 2 x original M3x18mm…
- Downloads
- 50
- Likes
- 7
- Rating
- 5
P
PrintablesCHARL13
Blind Pull Cord
Replace broken or missing pull cords. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: Print upside down with a a brim. Category: Replacement Parts
- Downloads
- 38
- Likes
- 6
- Rating
- 0
P
PrintablesCHARL13
Anet A6 MKS Gen L Board Adapter
The adapter will allow the mounting of an MKS Gen L board to the standard Anet A6 mounting holes. Hardware: 4 x M3x16mm screws 4 x M3 nuts 4 x No.4x9mm flange screws (but you could try the M3x12mm screws from the kit) Print Settings…
- Downloads
- 31
- Likes
- 2
- Rating
- 0
P
PrintablesCHARL13
OpenAstroTracker Bearing Shim
I'm building the OpenAsdtroTracker and found my bearings to be too lose. I created these shims to sit between the roller bearings and the roller mounts to keep the bearings in the correct place. Print Settings Printer Brand: Creality…
- Downloads
- 25
- Likes
- 1
- Rating
- 0
P
PrintablesCHARL13
Anet A6 Frankenstein Part Cooling
I wanted a better fan fixing option but found that the cable management feature was fouling on the frame so I've removed it. Category: 3D Printer Accessories
- Downloads
- 13
- Likes
- 1
- Rating
- 0
P
PrintablesCHARL13
OpenAstroTracker Driver Box
I found a lot of the existing options for the drivers didn't work for me so I've created my own. It has holes so that you can either mount it to the 2020 extrusion using M4 screws and T nuts, or attach it to the RA wheel using the…
- Downloads
- 9
- Likes
- 1
- Rating
- 0
These are all currently available results.