Counting matching models…
Cobbled together in PrusaSlicer Jupiter with the socket, printed fine from my side and looks great. Will print fine in PLA, I used Eono White PLA in 0.2mm layer height. For the light use for best fitment a E14 bulb or a small E27, the…
Update: I added a Relief version. Also added new version for all sides with filled handles.
Remix the 3D-maker case with SSD support Used for mine the Geekworm SSD board ( Amazon )
Easy to print, ideal with outside facing your print bed. Tested in PLA and ABS with 0.2mm layer height. Scales are press fit, if needed use parallel pliers to press them on your knife. Version with and without the Victorinox Cross, which…
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Modular Spool Rack inspired by MikeFliers one, easier to print and with parametric holes to customize to your local available rodsizes. Recreated completle new in Fusion360. All parts beside the middle bracec can be printed without…
Helldiver Logo usable as a Keyring. Designed to print with mid print filament change.
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Remix of the Adapter from Born-of-Fire I corrected a few things because they where a bit wonky (terminal Part was tilted, etc) and designed the parts to fit a generic Bosch Battery Case from Ali or eBay. Parts you need * 1x Battery Case…
Updated Resin Mixer based of the design from KrzCich_375768 which uses a ZGA37 geared motor.
Remix of the attachment holder for the vacuum pipe into a three Accessoir Wallholder. Should work for all 32mm diameter accessoires. Mine printed on a Voron 2 with Nobufil Astro Black ABSx in 0.2mm and three perimeters
Just a simple Headphone Holder for mounting on a wall or cabinet. Step File included Print Settings Printer Brand: Anycubic Printer: Semi-closed 4Max Rafts: No Supports: No Resolution: 0.25 Infill: 20% Filament: Eryone PLA White Category:…
Revamped version of Mike Pensingers Omnifixo Storage Box
I got inspired by the design from Shiftys_Woodwork (thing 4085402) which were not perfect in fit and finish and had a huge design flaw in my opinion. Small parts like m3 bolts and nuts were able to mix because the separators did not reach…
Just a simple stand for the Nintendo 3DS XL (and probalby non XL versions)
Hi, this is a simple rackmount cover for the modular system 19" 2u rack for a 80mm Fan. I use it to cool my UDOO x86 (for it you can find a Rack Mount in my Deisgns) You can get the Frame on Amazon or directly from the Distributor…
Did a in my opinion better handle with a horizontal spring load instead of the squeezing in and screw in back fit. It also helps with slightly different length and shapes of the stone, for the original one I had to file mine a bit to fit…
Thought the case is neat, but I rather like to use the B variant, so I redesigned the case a bit. m3 Bolts are used to secure both shell parts together. I've used a random 30x30x10mm Fan from amazon. Cheers Print Settings Printer Brand:…
Raspberry Pi4 mount with SSD (I've used this SSD USB Board from Geekworm https://www.amazon.de/gp/product/B088LQWDBD?psc=1 ) You'll also need 4 m2,5 Heatset inserts (…
The IKEA Trjena Boxes do not have any place for labeling without potentiality damaging the box. So I thougt ftijpi. I created one for the big boxes with a grip hole and for the smaller ones without. Print Settings Printer Brand: Anycubic…
Changed the original bottom to fit perfect these generic metal Solder ironstands. Glue it with a bit of Hot glue in place. For better protection you can cut a circle from a can and put it in the back of the holder, now you can’t poke with…
Hi, this is a simple rackmount cover for the modular system 19" 2u rack for the UDOO x86 You can get the Frame on Amazon or directly from the Distributor…
The mount has been redesigned with a slightly increased thickness to accommodate the additional wiring requirements of the Shelly Plus i4. It now supports: 2x WAGO 221-412 terminals mounted side by side 1x WAGO 221-415 terminal for the…
A simple but sleek Headphone Stand with a 20mm dowel. Designed for PLA. Print with 0.2 or 0.25 layer height and at least 3 better 4 perimeters, infill goes with you gusto but for the top part I would recommend to print it lightweight but…
This 3x2x5u Gridfinity Holder can hold one TS100 style CNC Kitchen Adapter and up to 7 or 9 Tips and also 5x m3, 5x m2,5 and 5x m2 screws for the heatset removal tool. The holder features screws and heatsets to hold the tips and the…
I had problems with the longterm durability with the printed knob/rod. In this version you can insert a 8mm threaded rod and two nuts. Now you got the power to tighten the fume extractor head! :D STEP Files included Print Settings Printer…
Hardware I used: Geekworm PiKVM POE Hat DAP 2 HU Bezel USB right angle adapter 2,5mm brass distance hexnuts
Inspired by @spoonwzd_919217 Version I created my own with some upgrades. Easier to Print and installable after the fact.
I remixed this from the original Design by blindemoe. I used his design the whole time, but after I upgraded my printer to an Metal frame (AM8) his design was a few mm to wide. I changed the location for the cables, now everything is…
The design is simple, lightweight, and installs without any additional hardware. All parts are designed to snap together, and the HmIP-KRCK can then be inserted directly into the holder. Print Settings Material: ABS or ASA (recommended)…
Buttstock broke two times while assembly, so I beefed it up. Remix from https://www.thingiverse.com/thing:2828833 Print Settings Rafts: No Supports: Yes Resolution: .2 Infill: 20 Filament: Generic PLA Category: Video Games
The mount has been adapted to accommodate the different dimensions and wiring requirements of the HMIP-FROLL. The design allows for two different WAGO terminal configurations: 2× WAGO 221-413 terminals or 2× WAGO 221-412 terminals with an…
My 3D printers are arranged under a shelf, so I have created a hollder for my filament. It's a pretty neat way to hold the filament for printing, the standard holders for almost every printer has in my opinion some flaw (bad location, bad…
I designed this enclosure/mount for the Louder ESP32 Mini 55 to install it directly onto speakers with a 55 mm speaker terminal / connector panel opening . I’m currently using it on both the JBL Control One and JBL Control One Pro , which…
A simple Remix for the full graphic Display with a 1cm rim and 3mm mountingholes. Print Settings Printer: AM8 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .2 Infill: 10% Category: 3D Printer Accessories
These are all currently available results.
