62 models
My friend wanted to carry a few Band-Aids in her purse without them getting torn or crumpled. Print Settings Resolution: 0.3 Infill: 40% Filament: PLA Orange Notes: Two shells. Category: Containers
Used the very excellent Stamp-o-matic with clipart of a laurel wreath. Easy-peasy. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3 Infill: 25% Filament: ? PLA Tan color Notes: Two top/bottom…
Very large crochet hooks are often hard to find as well as expensive, so I created a US size S (19mm) hooks with the customizer below. I had to shorten it due to the limitations of my print bed, but it turned out very usable. At 0.2…
Customized version of http://www.thingiverse.com/thing:290279 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=290279 Print Settings Resolution: 0.3 Infill: 30% Notes: Printed in PLA. Instructions Using the…
I liked the needle storage in the original and that it would fit into an Altoids tin, but I thought that the spaces to hold thread were too big. I also wanted notches to hold the thread ends, and space for three colors: black, white, and…
This was created with clip art and the stamp file generator below. For fabric paint to properly adhere, use 500 grit sandpaper on the stamping surface until it's no longer shiny. Customized version of…
Printed in white and transparent purple PLA to hold a pair of earnings ( https://www.thingiverse.com/make:379734 ) for my mom's birthday. She's never seen a 3-D printer in the small town where she lives, so she was fascinated by both…
Scaled Z to 70% for easier use - the wells were a bit too deep at 100%. Customized version of http://www.thingiverse.com/thing:43406 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=43406 Print Settings…
Customized version of http://www.thingiverse.com/thing:356988 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=356988 Print Settings Resolution: 0.3 Infill: 25% Filament: ? PLA Rainbow Notes: Two top/bottom…
Customized version of http://www.thingiverse.com/thing:48499 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=48499 Print Settings Resolution: 0.3 Infill: 80% Instructions Using the following options:…
Imported the Cat Ears file into TinkerCAD, sliced off the bottom few millimeters to get rid of the slot, then added loops for sewing onto a ribbon. Added a little pink acrylic paint, sewed them onto a ribbon then onto my favorite black…
I loved the Celtic Trinity Tealight Holder ( https://www.thingiverse.com/thing:489648 ), but it was too big for my printer's bed. I couldn't just scale down the whole thing either, because then a tealight would no longer fit in the cup.…
Scaled to 70% for printing. Customized version of http://www.thingiverse.com/thing:1748268 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1748268 Print Settings Resolution: 0.3 Infill: 30% Notes: Printed…
If bifurcated means divided in two, then divided in three must be trifurcated, right? (Just ignore that nit-picky spell check.) Customized version of http://www.thingiverse.com/thing:612709 Created with Customizer!…
Customized version of http://www.thingiverse.com/thing:359200 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=359200 Instructions Using the following options: frameHeight = 10 edgeRoundness = 0.5…
Lid fits securely but is easy to slide off. Printed in white PLA for food safety. Customized version of http://www.thingiverse.com/thing:201304 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=201304 Print…
White in flexible PLA, yellow in hard PLA. Customized version of http://www.thingiverse.com/thing:290279 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=290279 Print Settings Resolution: 0.2 Infill: 100%…
Printed in white PLA for food safety. Customized version of http://www.thingiverse.com/thing:384919 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=384919 Print Settings Resolution: 0.3 Infill: 30%…
This is how I've felt about 3D printers ever since I first saw one in action and utterly geeked out. Every technology has to start off somewhere, right? Highlighted the the lettering and border with Sharpie after printing. Customized…
I was having trouble unscrewing the plate of my sewing machine when the thread got snarled down below. A regular screwdriver wouldn't work because of the lack of clearance, and the tool that came with the machine was almost useless (see…
I have several small wooden bobbins that I like because they make braiding easier. I wanted more, so I created them in TinkerCAD. Print Settings Resolution: 0.3 Infill: 40% Category: Hobby
Customized version of http://www.thingiverse.com/thing:893419 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=893419 Print Settings Resolution: 0.3 Infill: 30% Notes: Printed in PLA. Instructions Using the…
These are smaller than modern weaving tablets (or cards), closer to the size used historically in the Middle Ages. Printed in PLA. Customized version of http://www.thingiverse.com/thing:641938 Created with Customizer!…
Printed in PLA Customized version of http://www.thingiverse.com/thing:55821 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=55821 Print Settings Resolution: 0.3 Infill: 25% Instructions Using the following…
After breaking the cap to my small seam ripper, I searched Thingiverse and was astounded to find no replacement, so I set out to remedy that lack. The Space Pen cap had the closest shape, so I resized it in TinkerCAD to fit and printed…
My mom goes out daily to make sure none of her cats have left a "present" on the neighbor's lawn, which she refers to as going on Poop Patrol. Of course I had to make this, wouldn't you? In TinkerCAD, I removed the lettering and added…
I liked the Sarong Buckle ( https://www.thingiverse.com/thing:132522 ), but some of my scarves were too bulky to fit through easily. I created this one in TinkerCAD. Print Settings Resolution: 0.3 Infill: 10% Notes: Two shells Category:…
I've had this beautiful little wooden clipboard for years and could never get a pen to stay attached to it. This clip was designed to fit the thickness of the clipboard and the short, fat pen I use with it Customized version of…
This was created with clip art and the stamp file generator below. I wasn't sure if such a complex stamp was going to print well, but it worked out great. To finish, clean out any filament bits and cobwebs from the print details, then use…
I have a small printer, so I needed small yarn bowl to print. I didn't care for the ones with elaborate spirals and patterns- too much support to clean up afterward (I'm lazy). I liked the Subtle Poly Yarn Bowl (…
Something to hang on the wall above my printer. Highlighted with metallic gold Sharpie after printing. Customized version of http://www.thingiverse.com/thing:1731842 Created with Customizer!…
A handy reminder to have at your desk when work gets rough. :) Printed in blue and transparent purple PLA, writing filled in with a fine Sharpie. Customized version of http://www.thingiverse.com/thing:188275 Created with Customizer!…
Customized version of http://www.thingiverse.com/thing:580150 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=580150 Print Settings Resolution: 0.3 Infill: 30% Notes: Two shells. Instructions Using the…
Made the right size to securely hold four spare extruder nozzles, or similar very small things, so I won't lose them. Nice design; required very minimal cleaning up for the top to slide smoothly. Customized version of…
I loved the Celtic knotwork design on this spindle whorl, but I prefer to use a bottom-whorl spindle. I imported the file into TinkerCAD and simply continued the existing hole all the way through. It spins fine threads beautifully- my…
Filled in spots with white Sharpie and sanded off the drips. Customized version of http://www.thingiverse.com/thing:264768 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=264768 Print Settings Resolution:…
Customized version of http://www.thingiverse.com/thing:1394368 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1394368 Print Settings Resolution: 0.3 Infill: 50% Notes: Printed in PLA. Instructions Using…
Fits a standard 75mm soup can. Printing with two shells made the dividing vanes very sturdy. Printed in PLA. Customized version of http://www.thingiverse.com/thing:2372632 Created with Customizer!…
Customized version of http://www.thingiverse.com/thing:1198825 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1198825 Print Settings Resolution: 0.3 Infill: 50% Notes: Printed in PLA. Category: Decor
My family has a beloved game called Waterworks, which came with a set of small metal wrenches. Unfortunately they were all lost over the years and we had to make do with pennies. No longer, thanks to the magic of 3-D printing! I shrank…
Customized version of http://www.thingiverse.com/thing:51655 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51655 Print Settings Resolution: 0.3 Infill: 20% Instructions Using the following options:…
Customized version of http://www.thingiverse.com/thing:51655 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=51655 Print Settings Resolution: 0.3 Infill: 20% Instructions Using the following options:…
This seems to be one of the standard tin sizes, smaller than a regular Altoids, formerly holding fancy organic mints. The insert is just a hair too big- I had to clip the corners off and really force it into the tin. It's sure not coming…
For fabric paint to properly adhere, use 500 grit sandpaper on the stamping surface until it's no longer shiny. Customized version of http://www.thingiverse.com/thing:356988 Created with Customizer!…
Printed in PLA at 50% scale. Customized version of http://www.thingiverse.com/thing:330855 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=330855 Print Settings Resolution: 0.3 Infill: 40% Instructions…
I liked the original desk ornament but I preferred a plaque for my computer room wall. I edited the file using TinkerCAD to make it 80 x 80 x 5mm, and also created one with holes for fasteners if you prefer. Without holes (shown):…
Printed in translucent purple PLA at 80% scale. Customized version of http://www.thingiverse.com/thing:1220978 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1220978 Print Settings Infill: 30%…
Customized version of http://www.thingiverse.com/thing:1198825 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1198825 Print Settings Resolution: 0.3 Infill: 50% Notes: Printed in PLA. Category: Decor
A tiny box to keep my spare printer nozzle safe (and not lost). Printed in PLA. Customized version of http://www.thingiverse.com/thing:384919 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=384919…
I created this motif to use for stamps, stencils and other embellishments. Examples I've made are the Western Demisun Stencil ( https://www.thingiverse.com/thing:2483224 ) and the Western Demisun Stamp (…
Printed in PLA. Customized version of http://www.thingiverse.com/thing:55821 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=55821 Print Settings Resolution: 0.3 Infill: 25% Instructions Using the…
Inspired by the shape of some antique cards used for holding thread or embroidery floss. The originals were made of made of thin cardboard. The shape as designed was far too small, so I scaled the X&Y at 280%, and the Z at 150%.…
Scaled to 60% for printing. Customized version of http://www.thingiverse.com/thing:1220978 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1220978 Print Settings Resolution: 0.3 Infill: 25% Notes: Printed…
Printed in purple ABS to hold my Craft Queen playing card deck. Customized version of http://www.thingiverse.com/thing:1213646 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1213646 Instructions Using the…
Customized version of http://www.thingiverse.com/thing:356988 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=356988 Instructions Using the following options: contour_radius = 2 stamp_width = 30…
Highlighted with Sharpie after printing. Customized version of http://www.thingiverse.com/thing:1748268 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1748268 Print Settings Resolution: 0.3 Infill: 50%…
When I was having a tough time in college, my grandmother sent me a little card with words of encouragement. It's gotten a little tattered over the years, from hanging with pins and tape, so I've decided that it merits a custom frame.…
Printed in PLA, then used a gold-colored Sharpie in the holes. BTW, the odd things sticking out from behind the die in the second photo are the binder clips I used to prop it up. Customized version of…
I made this insert to fit a plastic box that held Q-Tips. It's a hair too big, but the box still closes so I'll call it good. Customized version of http://www.thingiverse.com/thing:109158 Created with Customizer!…
Scaled for a narrower size 11 ring: XY 90%, Z 50%. Printed in white flexible PLA at 40mm/s, then (sloppily) highlighted the raised characters with red Sharpie. Customized version of http://www.thingiverse.com/thing:48198 Created with…
Customized version of http://www.thingiverse.com/thing:356988 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=356988 Instructions Using the following options: contour_radius = 2 stamp_width = 30…
Customized version of http://www.thingiverse.com/thing:58944 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=58944 Print Settings Resolution: 0.3 Infill: 20% Filament: PLA Yellow, blue, green, black,…
These are all currently available results.
