Counting matching models…
Some simple shelf brackets. Use flat head screws so you don't split the layers Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: who cares PLA/PETG Black Notes: print…
a simple cable management thing to tape/glue/screw under your desk Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Infill: 50 Filament: NA PLA Notes: print on its side for best strength…
This is a remix of : https://www.thingiverse.com/thing:1449187 Hi, I modified the sword made by @ChaosCoreTech I made it 80% size (the sword is now 88cm long). Less divisions. Fixed the triforce logo. I also added a 14.5mm hole all the…
Just a 3D model of the Immortal-T antenna (new and old versions) from TBS, to help you create mounts for it. Feedback is always appreciated so let me know if something's wrong. Enjoy ! Category: R/C Vehicles
Modified the Red Squirrel fan duct to fit my needs : adjusted holes diameter to fit M3 screws better made the 5015 fan holding arm and clamp thing beefier to not break when screwed removed the top cable guide added a bltouch mount See the…
A simple little piece to help you tune your part cooling/overhangs settings Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.25 Infill: 20 Filament: NA PLA Category: 3D Printing Tests
Another enclosure with sliders potentiometers this time, which I prefer. Deej project info : https://github.com/omriharel/deej parts : arduino mini nano : https://store.arduino.cc/arduino-nano master pot :…
This is a simple desk stand for your Kobo Clara e-reader.
Various TPU parts I designed for the SpeedyBee FS225 Frame. To fit the original Caddx Vista antenna, I suggest you cut the TPU where I marked the red line with an exacto knife, spread and insert the antenna, and then superglue back the…
An enclosure for that great project : https://github.com/omriharel/deej Category: DIY
This is a volumemixer controller, more info here : https://github.com/omriharel/deej parts list : Arduino : 1x https://store.arduino.cc/arduino-nano (or you can use any cheap clone) Master pots : 1x…
Print in TPU, enjoy ! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 100 Filament: SaintSmart TPU Category: R/C Vehicles
THIS IS A WORK IN PROGRESS ! Redesign of https://www.thingiverse.com/thing:4667511 Should be easily printable with a 0.4 nozzle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.125 Infill: 50…
Just a simple micro cam mount, there's a normal version to use without a chin guard. Use the "chin" mount version with the provided chin guard. Enjoy ! Print Settings Printer: ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100…
Replacement for the glass reservoir which tend to break when you drop it on the floor.. Category: Kitchen & Dining
This design has a "lip" thing to prevent dirt from going in the motor. Motor bell used was 28mm diameter. You'll have to force it in but it's not too bad, and it's a tight fit after :) You can also scale it 1 or 2% bigger in your slicer…
GPS holder for the TBS M8 GPS GLONASS ( https://www.drone-fpv-racer.com/tbs-m8-gps-glonass-4721.html ) Fits nicely. Print in TPU, I printed as the picture shows it (not the 3D model, which is shown upside down for some reason). Seems…
This is a basic cap so the tip of your TS100 soldering iron doesn't get damaged. Also prevents it to go through your bag when traveling. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.3…
This is a very basic part that allows you to use your regular hard GoPro TPU mount with ReelSteadyGo ! Test have been great so far with it, let me know how it works for you. I was surprised how sturdy it is too ! Print Settings Printer…
These are all currently available results.
