Counting matching models…
The names of all files include the number of parts needed !!!ATTENTION!!! LOW version fits all k1se, HIGH-only for printers with 4 m3 holes in the top of the frame. I cut out the panels from 3mm acrylic and printed other parts from PETG,…
Corners must be printed without supports, oriented small hole down Panels-3mm acrylic (or not acrilic, but 3mm) BOM: 16 m3x6 screws 4 m3x8 (or m3 shorter than 20) 2-4 magnets 6x2mm I guess that you need to use it with cable chain (I don't…
NAS for 13 2.5 inch hdd/ssd, that should be printed in 2 parts. I used 0.2mm layers and 0,4mm nozzle. infill-5%. Use it
top part and tooth would be 100% infill in all situations, handle I printed in 25%. I recommend to print it from PETG, ABS and etc.
All config changes are same to model origin. PRINTS WITHOUT SUPPORTS (MOUNT FOR 4020 WAS UPDATED) There are models for 3 types of hotends: Stock hotend K1 hotend and K1 nozzle K1 hotend and E3D VOLCANO nozzle (I am using this one) I tried…
simple overhang test from 45 to 80 degrees. Step 5 degrees
just simple paddle drip rings that could be print with minimal supports. Orient models small hole up, and turn on automatic organic supports, it made 45 degrees angle so supports would be only in center to hold small ring on the top,…
Small chamber heater with 7530 fan and 24v heater Thick: 41mm, 48mm with mount (but i guess i will make it 5mm thinner) Designed just because I had idea and all components. BOM: 1x 7530 24v fan: Aliexpress 24v heater: I used 3x heater on…
I use my k1 with chc pro (so for unicorn you need to make it longer for 2mm) And also i don't use mcu on a head, so i am not sure that it will fit to the stock k1. prints without supports
i changed all boards in my k1se with octopus pro, so i needed a mount for adxl to calibrate shapers automaticly. mounts on the back side. need 2 m2 screws and maybe 2 m2 thread inserts.
Cad files with full, part-less, and adapted for printing without supports mounts for pts heaters. As I know, original are made from pa66(nylon66). so you need something like pa/pa cf, i guess
These are all currently available results.
