P
Printables3dptrk
Bronco Sport Key Holder
I made my own Bronco Sport Key Holder for the gap between the cup holders. I would print at least PETG, if not ASA or ABS. Print Settings: 15% infill .2 layer height
- Downloads
- 477
- Likes
- 44
- Rating
- 5
All models
Counting matching models…
P
Printables3dptrk
Rock Skull Keychain
Print Settings .2 Layer Height 20% infill Color change at layer 16 Prints in about 40 minutes and uses minimal filament.
- Downloads
- 409
- Likes
- 104
- Rating
- 5
P
Printables3dptrk
Fanttik Vacuum Holder x100
15% infill .2 layer height no supports
- Downloads
- 280
- Likes
- 49
- Rating
- 5
P
Printables3dptrk
Vinyl Sleeve Mount
Vinyl Sleeve Mount Extra Materials Super Glue Screws (get screws that have a flat head and not rounded) Print Settings .2 Layer height 20% Infill Post Print You will need to superglue the plaque onto the mount. It is not meant to match…
- Downloads
- 156
- Likes
- 52
- Rating
- 5
P
Printables3dptrk
Trick or Treat stand
This is an easy and perfect way of showing your Halloween spirit! Printing: 20% infill no supports * If scaling, do not go below 70% or structural integrity will be compromised.
- Downloads
- 115
- Likes
- 36
- Rating
- 0
P
Printables3dptrk
Honeycomb Desk Organizer
This model is the perfect companion for any desk. Hold all your office items in one place. Even has wire management. Printing: .2 Layer height 15-20% Infill *Supports for build plate only. * You can probably print without supports, better…
- Downloads
- 79
- Likes
- 17
- Rating
- 0
P
Printables3dptrk
Airtag holder for Roku Remote
This holder will save you your marriage. Now find your roku remote with an airtag!!! It is also a quick print. Use my settings and it will be done in 3 hours (petg)! Print Settings: Supports 15% infill recommend petg
- Downloads
- 72
- Likes
- 19
- Rating
- 0
P
Printables3dptrk
Pruscaster redesigned pickguard
I redesigned the pickguard to make it a little more durable. It is recessed for all electronics and screws. It is a little thicker for durability, and you can even do a color change to make it pop! Works perfectly on pruscaster.
- Downloads
- 68
- Likes
- 10
- Rating
- 5
P
Printables3dptrk
Ana L. Name Badge
Turn heads and butts with this nametag! Use my gcode for your prusa for ultra quick printing and color changes all set. Print settings: .2 layer height 15% infill color changes are recommended at 1 mm, 1.2 mm, and 2.20 mm.
- Downloads
- 54
- Likes
- 28
- Rating
- 0
P
Printables3dptrk
Hive Coaster
You will love this design. do a color change to make it more appealing! The base can also be used as a coaster. If your drink doesn't fit the circle, flip it over! Print: print base with a higher infill. At least 40% other coasters can be…
- Downloads
- 50
- Likes
- 16
- Rating
- 0
P
Printables3dptrk
Thread Boards Skadis Adapter
You can add a thread boards screw behind the skates adapter and then screw another thread board screw into it for the thicker skates hooks. You do not need a screw behind the adapter for the flatter skadis hooks. For example: In the…
- Downloads
- 42
- Likes
- 11
- Rating
- 0
P
Printables3dptrk
Fall coasters with holder
20% infill no supports needed. Hold 4 coasters
- Downloads
- 32
- Likes
- 9
- Rating
- 0
P
Printables3dptrk
Catchall with Magsafe Charger
Catchall with magsafe charger Print Settings: .2 Layer height 15% infill no supports needed
- Downloads
- 30
- Likes
- 10
- Rating
- 0
P
Printables3dptrk
I'm Important Business Card Holder
Show everyone how important you are! Great for bambu or MMU to get the second color. Added a version with rounded corners for you pretentious jerks. Enjoy! 15% infill no supports
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
Printables3dptrk
Honeycomb Soap Dish w/ resting rack
Print Settings .2 Layer Height 20% Infill Print out 3 bars If you have a prusa, use my customized file for fast printing and an awesome color change!
- Downloads
- 12
- Likes
- 2
- Rating
- 0
These are all currently available results.