Counting matching models…
UPDATE: Made the base larger to accept a tea candle light with a hollow cavity for translucent logo pieces. LED Tea Lights: https://www.amazon.com/gp/product/B009E1UWBI Widened the top for a more snug fit with Ghost Category: Props
Printed out on Photon S using clear resin, used 1.7mm clear filament as hinges per authors instructions. Works Great! Category: Camera
I wanted to make an easy touchscreen holder for kids (and adults) to easily have a phone accessible and thought a bracer/gauntlet would be the way to go. I am still learning CAD so this is very rough, did I mention very rough concept? lol…
I did not like messing with the stepper motors, I wanted them planted firmly. This goes with the stock metal plate. Mind which direction you install it, on mine the upper belt is on the left and lower belt on the right. Need four M3x35…
I made a DIY solar heater using ½" dripline and 12v pump but output was not strong enough so switched to 1300 Tsunami bilge pump. The 1 1/8th outlet on the pump is not very standard so created this to adapt/connect to my ½" dripline.…
Needed a little more wiggle room on the X axis for homing so I made an adjustable X endstop. Added X axis endstop for Laser attachment. Category: 3D Printer Parts
After I printed out Monoprice Select Mini SD Card Extender Holder-mod ( https://www.thingiverse.com/thing:2357466 ) I soon realized I had bought a MicroSD extender not SD LOL So I made this adapter since I had already printed out the SD…
I did not want to take my z rod apart so I increased the holes for M5 bolts and made cut out in the back to slide over rod flanges. Very secure, great original design by Hawaiian_Brian_78 HANG TEN! Print Settings Printer: TronXY x5s…
I was having a hard time mounting the original design and once I did it was not stable enough for me so I added a back mounting plate that uses the original screws and bolts the TronXY x5s 2018 comes with. Print Settings Printer:…
Computer speaker knob replacement. Print Settings Printer: Monoprice Mini Select v2 aka Malyan 200 Rafts: No Supports: No Resolution: .1 Infill: 100 Notes: Because it is small, I used 8mm brim to keep it stable during printing. How I…
EDIT: A remix of LazaroFilm's https://www.thingiverse.com/thing:2811140 I wanted a tighter fit and since there are no wires on the left side, I closed the U cutout. Fits fantastically on my Monoprice Select Mini v2 Q4of 2017 edition 3D…
I keep my PSU's on their side for better airflow so I needed something tall to hold my mosfet and keep my wire length down. Category: 3D Printer Accessories
I needed a little longer and made it two screw because the one screw type was turning on me as I tightened the screw. This is for 6mm glass. Might work on 3mm thick glass. Category: 3D Printer Accessories
If you are like me and keep assembling to fast then you forget to run the wires through the back hole that attaches to the panel and the connectors do not fit so I resized that back port to fit the connectors after soldering lol Front…
Add spacer because my rolls were getting stuck on the screw heads on the side of the printer. Category: 3D Printer Accessories
NAVMAN 2100 fuel flow gauge cover (without buttons). If you print in clear it and paint the top face, the sides glow from the meter LED. I have printed this on FFF and Resin and both are great. It is slightly rounder than the original.…
These are all currently available results.
