Counting matching models…
LSI 9305-16i or LSI 9305-24i fan shroud. This is a remixed design from barichardson with most overhangs removed to be more easily printed. Snaps onto the heat sink without the use of screws. Four STL files for both the 16i and 24i with…
Wall mount for HD HomeRun FLEX network TV tuners. Attach to wall with 4 pan/wafer head screws (Lath screws work well). Tuner can be placed with connections facing up or down. IGES and DXF files included for remixing.
Super simple fan grill for 92mm fans. that is configured by your slicer. Set wall line count to 4 or 5 (for 0.4mm nozzle) Set top and bottom layers to 0. Slow down infill print speed to be the same as your peremeter speeds. Pick your…
Wrenches for American Standard skirted two-piece toilets that have sub flush fill valve locking nuts. This wrench allows for removal of the fill valve nut without needing to remove the tank. Turn off water, drain tank, remove water hose,…
A dispenser for easer/fine control of syringe encased fluids like solder paste/flux/mask. Lever makes depressing plunger much easier and with greater control. Parts are already correctly oriented for printing. Fits ⌀ ¾" syringes Required…
A pole mounted J1772 EV charge plug holder. The design mounts to a 4' long x 1-½"⌀ pole that can be installed onto a weighted umbrella base. Permits storage of charger connector on the driveway near vehicles rather than attaching to a…
Simple mount to attach and align a G3 Instant on top of ifast to look thru the top cover. Camera attached using a ¼'-20x½' pan head screw. I stuck down the mount with 4 Velcro dots but double stick tape would also work. I followed this…
Compatibility mod for BenQ ScreenBar Halo for thick monitors. Opening case Remove 4 screws. 2 under regulatory label, 2 under corner of foam pad. (Pic1) Use a spudger to separate sides at the curved double stick tape and then remove whole…
Rugged Box with inserts for ½, ¾ Megapress rings and V1 actuator. Use M3x30 fasteners for hinge and latch attachment. Print Inserts out of TPU and case/latch from your favorite impact resistance plastic. DXF and IGES provided for remixing…
Bracket to attach a common coolant mister that's available on amazon to the Carbide 3D nomad3 spindle. Required Hardware: x2 M4x10 socket head cap screws x2 M4x30 socket head cap screws x2 M4 washers (max ⌀8mm) x2 M4 heat set inserts (max…
These are all currently available results.
