P
PrintablesGadjet
Playstation Portal Plug Wedge
Wanted the USB cable to stay nice and snug in the back of the stand.
- Downloads
- 779
- Likes
- 55
- Rating
- 5
All models
Counting matching models…
P
PrintablesGadjet
Lego 10300 DeLorean Wall Mount Slim
Requires 2 x Lego Connector Peg/Cross Axles and connects to the wall via a single screw. Prints in current orientation with no supports. Please note the layer lines are running in the direction of the stress forces so print with a strong…
- Downloads
- 522
- Likes
- 59
- Rating
- 5
P
PrintablesGadjet
lego DeLorean 10300 Wall Mount
Model should be printed in specified orientation without supports. Requires 2 x Lego Connector Peg/Cross Axles and requires 2 x screws to attach to a wall The storage easily fits all extra parts for the model Please note the layer lines…
- Downloads
- 448
- Likes
- 43
- Rating
- 5
P
PrintablesGadjet
3dMakerPro Turntable
I have also lowered the z print height by 4mm as I don't think it needs to be so think, but just change its z height position in your slicer if you want the full thickness. Also included the letters if you have a MMU you can do it in two…
- Downloads
- 440
- Likes
- 21
- Rating
- 5
P
PrintablesGadjet
Fire HD 10 Case
Got a Fire super cheap on sale and found cases to be way to expensive so I made this :) Have included two versions one with a Banana logo that you can print as a first layer inlay, and a version with no banana. Print Settings Printer:…
- Downloads
- 319
- Likes
- 14
- Rating
- 5
P
PrintablesGadjet
EP-133 KO II Hard Case
Hard case designed to fit the EP-133. No supports needed. You can use an AMS or tool changer to print the multi colour version or perhaps just print each half in different colours :) Happy Printing :)
- Downloads
- 252
- Likes
- 27
- Rating
- 5
P
PrintablesGadjet
Glue Spatula
Simple Epoxy/Glue spatula for application and stirring of Glue Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament: Generic PLA Category: DIY
- Downloads
- 251
- Likes
- 19
- Rating
- 5
P
PrintablesGadjet
ArgoMax - Retro Terminal
Inspired by the fantastic Callisto 2 project, I set out to build my own 60's inspired retro terminal/console computer. It's designed to be quite modular and open to customisations. One could ad standoffs for any single board computer for…
- Downloads
- 199
- Likes
- 154
- Rating
- 0
P
PrintablesGadjet
Retroid Pocket 2 Case V3
New version still functions as a hard case but have added more comfortable grips borrowed off this Nintendo Switch Comfort Grip: https://www.thingiverse.com/thing:2234489 This will now need supports to print but only will need them…
- Downloads
- 168
- Likes
- 17
- Rating
- 5
P
PrintablesGadjet
KP3S Bed Stabiliser
So my bed had a bit of a wobble from a bad linear rail block, so I replaced the block, problem was the replacement was just as bad as the first one. Or my rail has some really bad machining. Anyway to avoid spending more I designed this.…
- Downloads
- 154
- Likes
- 33
- Rating
- 5
P
PrintablesGadjet
K.O. II - EP-133 - Horn
No supports needed, Nice snug fit when printed with my A1 Mini.
- Downloads
- 140
- Likes
- 22
- Rating
- 5
P
PrintablesGadjet
Nintendo Game and Watch Stand (Super Mario Bros)
Simple stand to hold the Nintendo Game & Watch Colour Screen Edition. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: 3dJake PLA Matt Blue Category: Video Games
- Downloads
- 124
- Likes
- 23
- Rating
- 5
P
PrintablesGadjet
Inky Impression 5.7" Frame + Buttons
*Update, Added a version with print in place buttons, has some sacrificial supports that need to be removed. A tradition style photo frame for the Inky Impression with room for a Pi 0. I'm using it to display Spotify album art:…
- Downloads
- 118
- Likes
- 13
- Rating
- 4
P
PrintablesGadjet
Hanging Balloon clip
Tie a knot in the end of your balloon and attach the small end of the clip to the balloon. The big end can fit on string/cable/wire up to 6mm in diameter. Printed in PLA at 0.3mm layer height so it prints in 3 layers. Held up nicely…
- Downloads
- 90
- Likes
- 17
- Rating
- 0
P
PrintablesGadjet
EP-133 - Fickle Fader Knob Applicator
Will provide extra security when applying your fader knob reducing unwanted downward force. Printed on three different printers, I would say the tolerances are good for most machines although my A1 Mini is such a good boy I could perhaps…
- Downloads
- 90
- Likes
- 15
- Rating
- 0
P
PrintablesGadjet
AYN Odin Lite Buttons
These are a copy of the original buttons I have yet to print these (print at your own risk) but they have been designed for resin printing so the tolerances are tight so might not work if you print with FDM. Have included the fusion file…
- Downloads
- 69
- Likes
- 2
- Rating
- 0
P
PrintablesGadjet
Retroid Pocket 2 Case Slim
Simple clip on travel case to protect front of Retroid Pocket 2. Can be clipped on the back when you are using the Retroid Pocket (Take note that the example pictured above was printed in draft mode, you should be able to get a much nicer…
- Downloads
- 65
- Likes
- 5
- Rating
- 0
P
PrintablesGadjet
AYN Odin Stand - Folding
A simple folding stand for the AYN Odin. Designed pretty quickly so might need another revision - but hey it verks! It's print in place with some tight tolerances. Printed in PLA
- Downloads
- 63
- Likes
- 4
- Rating
- 0
P
PrintablesGadjet
Urban Arrow Reflector Cap
Replacement Cap for urban arrow reflector. Have only printed on an Anycubic Photon Print Settings Printer Brand: Anycubic Printer: Photon Rafts: No Supports: No Resolution: 0.05 Filament: Resin Resin Category: Parts
- Downloads
- 58
- Likes
- 4
- Rating
- 0
P
PrintablesGadjet
Raaco Sliding Latch
Found a Raaco Service Case 17 with a missing latch. Designed quickly so not super fantastic looking, but it's tested and works as expected. Also prints without supports. The little inner tab thing that locks it in place is pretty thin so…
- Downloads
- 52
- Likes
- 9
- Rating
- 4
P
PrintablesGadjet
Urban Arrow Replacement foot
This is a replacement foot for the Urban Arrow as mine wore out. It's designed to fit both sides. When fitting I think perhaps i might have needed a longer bolt but can't remember. At some point I might update the design to make it bigger…
- Downloads
- 47
- Likes
- 8
- Rating
- 0
P
PrintablesGadjet
Retroid Pocket 2 Case V2
This has been upgraded to: https://www.thingiverse.com/thing:5137222 A remix of the original this time with a little more grip for when the case is clipped onto the back when playing. Also the tolerance is better in regard to the button…
- Downloads
- 37
- Likes
- 5
- Rating
- 0
P
PrintablesGadjet
AYN ODIN stand
As stated super simple so you wont have access to headphone jack or USB C port.
- Downloads
- 34
- Likes
- 3
- Rating
- 0
P
PrintablesGadjet
Loctite Precision Holder 5g
Simple holder for a 5g loctite Precision glue bottle that can be affixed with a single nail. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: N/A PLA N/A Category: Tool Holders & Boxes
- Downloads
- 29
- Likes
- 3
- Rating
- 5
P
PrintablesGadjet
Ikea Draw Insert (Variera 21386)
Printed with 2 walls Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Filament: N/A PLA Category: Kitchen & Dining
- Downloads
- 22
- Likes
- 3
- Rating
- 0
P
PrintablesGadjet
Urban Arrow tent pole cap for stitching repair
Designed this today and am waiting for the bike to come home so i can test it, will edit this out once tested. We have the older version rain cover for a 2017 Urban Arrow and the tent poles have both popped through the end of the rain…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesGadjet
Danish Outlet Faceplate (Stikkontakt Ramme)
Included are 3 models, a single, a double and a slime! version. As far as I know these will probably only fit Danish outlets but could possibly work on German ones…? Anyway will probably design some more in the future with hooks or usb…
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesGadjet
Urban Arrow Steering arm wear pad
This is designed to fit an Urban Arrow purchased in 2017. It replaces the original and is affixed with a couple of zip ties to the bracket on the underside of the Urban Arrow that the stearing arm passes through. I believe this part in…
- Downloads
- 14
- Likes
- 0
- Rating
- 0
P
PrintablesGadjet
M5 Male Female Rubber Mounts (Bike Wheel Lock)
These were designed to fit a Urban Arrow bicycle wheel lock but can be used for multiple purposes. They use a M5 threaded insert on one side (M5x6x7) The other side you insert a length of M5 threaded rod heated up so it melts in like a…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesGadjet
Jakemy Rocket
Simple holder for the Jakemy Electric Screwdriver with a diameter of 20.2mm. Print Settings Printer: Sovol SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: 3DJake TPU Matt Blue Category: Tool Holders & Boxes
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesGadjet
78mm Collimator Lens Mount
Simple collimator lens mount designed for lens with a 78mm maximum diameter. Although I think when purchased online it was listed as 77mm. Category: Gadgets
- Downloads
- 9
- Likes
- 0
- Rating
- 0
These are all currently available results.