Counting matching models…
Required material 4x magnets d.6mm x 3mm 8x 2x6mm screws 16x 2x8mm screws Print settings 180-Guide / 130-Guide: 0.2mm layer height, 4 perimeters – 4 bottom – 4 top, 23% gyroid infill; 180-Guide-Hinge: 0.2mm layer height, 4 perimeters – 4…
25cm long stick for mixing chemicals. Printing tips Material: PETG; Layer: 0.2mm; Infill: 42%.
I designed this filter holder to improve the practicality of use of Foma contrast filters. The frame is designed for my enlarger (Durst F60) but I think it is compatible with all Durst enlargers for 6x6 negatives. The dimensions of the…
Front without Neopixel rings, designed to close the printer via an acrylic panel with simple cuts and an attractive design. To be combined with the reinforcement brackets: https://www.printables.com/it/model/786659-blv-mgn-cube-braket The…
Reinforcement and stiffening bracket for the front part. Connect the 2020 front profile to the 2040 side profile. Printed in ASA 3DO, 0.3mm layer height, 5 perimeters and 31% infill. Extra material: 4x M3x10 hex head screws 4x M3 T nuts
Printed in XPETG Extrudr, 0.3mm layer height and 23% infill. For assembly: 8x M3x8 hex head screws 2x M5x25 hex head screws 2x M5 nuts 4x M3 T nuts
Support bracket for the heated print bed cable. Printed in XPETG Extrudr, 0.3mm layer height, 23% infill. Extra material: 2x M3x8 hex head screws 2x M3 T nuts
Does not require supports. Printing material: PETG Material used: 2mm diameter elastic cord. To assemble (see pictures): - Create 1 node; - Pass the cord through one hole in the front cap, in the two in the rear cap and, subsequently, in…
These are all currently available results.
