Counting matching models…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #12 (1.04mm)…
Layer height of 0.20mm Plate with Asus ROG 140mm x 120mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 21.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm)…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu Yellow PLA+ Sunlu White This print uses 5 unique filaments Start with Black At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 119x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Red PLA Anycubic Vibrant Yellow PLA+ Sunlu White This print uses 5…
Layer height of 0.20mm Ac Milan emblem measuring 150mm x 93mm x 25mm. Divided into several parts ideal for single color printers
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Anycubic Green PLA+ Sunlu Yellow PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black…
Layer height of 0.20mm Logo designed to also be printed with a monocolor printer. Change color you layer 41 on the 25th, 43 Internal edge, 45 the writing fs and 47 the black…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Silver PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 114x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Fuschia PLA+ Sunlu Red PLA Anycubic Vibrant Yellow PLA+ Sunlu White…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Orange PLA+ Sunlu Yellow PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x170mm in size PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Meta Chocolate PLA+ Sunlu Skin PLA+ Sunlu White This print uses 4 unique filaments…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 101x170mm in size PLA Black PLA Gray PLA Sky Blue PLA White This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 122x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White This print uses 3 unique filaments Swap Instructions: Start…
For all the nostalgic people (like me), I created a copy of the GTA Vice City Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
Layer height of 0.20mm Plate with Nike SB 125mm x 70mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 21.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Red PLA+ Sunlu Orange PLA+ Sunlu White PLA Anycubic Vibrant Yellow…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky Blue PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 121x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size PLA+ Sunlu Black PLA Sunlu Meta Mint Green PLA+ Sunlu White PLA Sunlu Matte Red PLA+ Sunlu Skin (Cream) This print uses 5 unique…
Layer height of 0.20mm Plate with Air Jordan 122mm X 112mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 21.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 98x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 116x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA BambuLab Basic Red PLA+ Sunlu Orange PLA+ Sunlu Grass Green PLA+ Sunlu Sky…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Red At layer #21 (1.76mm) swap to White for the rest.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 114x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Anycubic Green PLA+ Sunlu Grass Green PLA+ Sunlu Sky Blue PLA+ Sunlu Silver…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…
Layer height of 0.20mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 11.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 121x170mm in size Filaments Used: PLA+ Sunlu White PLA+ Sunlu Sky Blue PLA+ Anycobic Green PLA+ Sunlu Grey This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Chocolate PLA+ Sunlu Red PLA+ Sunlu Orange PLA+ Sunlu Pink PLA+ Sunlu White This…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 121x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Orange This print uses 2 unique filaments Swap Instructions: Start with Black At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 113x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Skin PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 112.77x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Sky Blue This print uses 2 unique filaments Swap Instructions: Start with Black…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 127x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Red PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu White PLA+ Sunlu Red This print uses 3 unique filaments Swap Instructions: Start with Black At layer #11 (0.96mm)…
Plate Transformers - Bumblebee Layer height of 0.20mm Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 21.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky Blue PLA+ Sunlu White PLA+ Sunlu Red PLA+ Sunlu Yellow PLA+…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 114x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu Red PLA+ Sunlu Orange PLA Anycubic Vibrant Yellow PLA+ Sunlu Silver…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA BambuLab Basic Red PLA+ Sunlu Skin PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte Red PLA+ Sunlu Grey PLA Sunlu Meta Chocolate PLA+ Sunlu Skin PLA+ Sunlu White…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start…
Layer height of 0.20mm Naruto Shishō Fūin seal plaque, 140mm x 140mm. Designed for single color printer with the support to be printed separately and then glued. If you want to make the seal another color, pause the printer at layer 26.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print uses 5 unique…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm This print uses 3 unique filaments Start with Black At layer #11 (0.96mm) swap to White At layer #17 (1.44mm) swap to Red At layer #26 (2.16mm) swap to White…
Layer height of 0.20mm Logo designed to also be printed with a monocolor printer. Change color you layer 31, 33 and 36 --------------------------------------------------------------------------------------------------- Logo progettato per…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print uses 5 unique…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size PLA Black PLA Grey PLA Silver PLA White This print uses 4 unique filaments Swap Instructions: Start with Black At layer #12…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Red T PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print…
For all the nostalgic people (like me), I created a copy of the GTA San Andreas Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start with Black At…
Layer height of 0.20mm Swap Instructions: Start with Red At layer #21 swap to Blue At layer #25 swap to Black At layer #27 swap to Blue
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120x170mm in size Filaments Used: PLA+ Sunlu Black PLA Sunlu Matte Red PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 98x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Gold PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Fuschia PLA+ Sunlu Purple PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu White PLA+ Sunlu Silver PLA+ Sunlu Orange This print uses 4 unique filaments Swap…
For all the nostalgic people (like me), I created a copy of the Max Payne Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 97x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 77x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu White PLA+ Sunlu Orange PLA+ Sunlu Red This print uses 5 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print uses 5 unique…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 132x170mm in size Filaments Used: PLA+ Sunlu White PLA+ Sunlu Grey PLA+ Sunlu Black PLA Sunlu Meta red This print uses 4 unique filaments Swap…
Layer height of 0.20mm Swap Instructions: Start with Grey At layer #26 swap to White At layer #28 swap to Orange At layer #30 swap to Black At layer #32 swap to Red At layer #37 swap to Black At layer #39 swap to Orange If you use a red…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 136x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu White PLA+ Sunlu Red This print uses 3 unique filaments Swap Instructions: Start…
For all the nostalgic people (like me), I created a copy of the GranTurismo Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 4 unique filaments Swap…
For all the nostalgic people (like me), I created a copy of the Metal Gear Solid 3 Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 5 unique filaments Swap Instructions: Start…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 96x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Pink PLA+ Sunlu Fuschia PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 110x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Red PLA+ Sunlu Silver PLA+ Sunlu Grey PLA+ Sunlu White This print uses 5 unique…
For all the nostalgic people (like me), I created a copy of the GTA IV Xbox disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not turn out…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Blue PLA+ Sunlu Sky Blue PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This print uses 4 unique filaments Swap Instructions: Start…
For all the nostalgic people (like me), I created a copy of the GTA Vice City Xbox disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not turn…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 128x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Grey PLA+ Sunlu Orange PLA+ Sunlu White This print uses 4 unique filaments Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 109x170mm in size Filaments Used: PLA+ Sunlu Black PLA+ Sunlu Gold PLA Sunlu Matte Red PLA+ Sunlu Grey PLA+ Sunlu Silver PLA+ Sunlu White This…
