208 models
Converted the original authors STLs to STEP with freecad and then modified to fit a USB C output connection. It's not perfect but it's functional.
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
I used a M2*8 set nut with an 8mm M2 screw to attach the lid. There is also space to insert 2mm diameter x 1mm deep magnets in the lid to help it stay clipped closed. Print the tip holder required and place in the case. There are holders…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
Use a PC disk drive externally with this cover
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
Protect your board with this case
Print approx. €0.56–€0.69 excl. taxPreliminary estimate for one variant
Helps push bits of stuck paper through a shredder - scale it to fit your shredder!
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for one variant
https://www.rcsb.org/structure/1aoi
Print approx. €7.37–€9.01 excl. taxPreliminary estimate for PETGSource material: PET
3D model of the 4v60 x-ray file from PDB
Print approx. €41.63–€50.88 excl. taxPreliminary estimate for PETGSource material: PET
3D model of the 1FNT x-ray file from PDB
Print approx. €15.35–€18.76 excl. taxPreliminary estimate for PETGSource material: PET
Lets you use smaller switches that are commonly available online with the Petamentor2 remote pannet holes
Print approx. €0.10–€0.12 excl. taxPreliminary estimate for PETGSource material: PET
Prevent damage to your flow cell when it's not in the detector
Print approx. €1.74–€2.12 excl. taxPreliminary estimate for one variant
Holds the IR remote for the heat and cool air circulator fan DCAC30HC
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for one variant
A funnel that attaches to a bottle for a clean easy pour
Spray Paint Cap Modifed the design from https://grabcad.com/library/spray-paint-cap-1 to have a wider hole that could be printed with a filament printer resolution. Category: Replacement Parts
No supports required. Print with white filament and then paint or colour the outside layer with a black marker. I used PLA but I suggest using PETG to get better layer adhesion so the ink does not flow between the print layers. I have…
Find all these models with additional files in their uploads. They are all in my ‘Gridfinity Survival Kit’ Collection here: https://www.printables.com/social/240789-stevew91/collections/296699 These are all the links: Gridfinity for…
Gauge for setting the action on a guitar. Resin printing required to print the resolution of detail required. Might need to be scaled to 10% size when slicing. Category: Tools
A simple lid to keep dust out of the case of JBL Wave 100 TWS.
A medal that can be modified to specify a particular personalised award. Category: Other
This is a cover for a tissue box so that items can be placed on top neatly without falling off giving you more space. You can print multiple exchangeable tops, or customise to make your own. Looks nice if you print the two parts in…
The rubber button on my Kobo stopped working but could press it with this once removing the rubber
A simple cable box May need aid of a screwdriver to bend the edge to fit the base in place. Category: Organization
Connect a 125mm and a 100mm piece of ducting with this adapter
Contains files for: - Single Zippo - Dual Zippos - Single Bic - Zippo and Bic Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Instead of having the T2 camera sit on top of the TV this stand helps to position the camera in a good position in front
A Spline roller for installation of flyscreening. Requires a single M4*30 bolt and nut. No supports required. Category: Household
Organise your cables writing labels on these tags
Corner bracket Category: Tools
For use with magnetic bead for peptide purification. No supports required to print, if printed where the rack is on it's side. Requires sixteen 12x2 mm neodymium magnetic disc. Category: Biology
This comes with a slider for 0.5 mm beads but I can made additional sizes on request.
Stand your extruder upside-down with this, to aid in the exchange of the nozzle.
I printed in glow in the dark PLA. Also included a version with an angle, in case of skirting that isn't square.
I remixed thing:4915190 by vikram31 to make space to fit the charging cable for a fitbit charge 5 within the stand. Category: Gadgets
Will continue to add to this collection as I work on it
A holder for a Kobo Clara HD. Requires some ergonomic adjustments Category: Gadgets
Gridfinity for maglite mini - part of my 'Gridfinity Survival Kit' Collection
3mf attached to print in multicolour to get red notch for RF alignment marker See the photos on how to cut down the lens to fit the larger hole, or just pop the lens out and put it in the print with the smaller hole. Note, you will need…
Multi-colour prints of international and super rugby team logos
A sheet holder for cliping to a microphone boom stand. Can be used to read lyrics or chords off paper without having to hold it and making noise picked up by mic. Category: Audio
Print on side.
A wall mountable hook for wrapping a cable around
Needed a lens hood for my RF 28-70 and thought $40 was too expensive
Keep tool bits inside your Zippo case and use them with the locker.
Used to hold a 160x18 mm plank of wood to create a shelf that hangs off a balcony balustrade. Category: Outdoor & Garden
A sleeve to fit 0.6 mL tubes in 1.5 mL size centrifuge holes Category: Biology
Hooks to fit powerboards. Use the version without holes with double sided tape and with holes can be fit with screws. Category: Electronics
A replacement platform for holding shotgun shell primers using a Lee Load-All press. Category: Replacement Parts
A scale wheel chock for 1:24 cars
Male luer cap that can be as a plug. Category: Other
Allows the latching of a fence gate to a wall so it does not blow closed
This organiser fits in a Pelican Case Air but requires printing in two parts. It has holes in the sides that join the two parts using brass set nuts but I also melted the seam together with a soldering iron. Prints without supports but I…
Made this clip for holding the Ringlight by TechTobi83 (www.thingiverse.com/thing:4726247) to my tripod. Category: Camera
Originally designed this to sit studio monitors on top of so that the tweeters were ear height, however, while printing my draft, reaslised they would not hold the weight. Still a functional design but never completed it myself.
Print in the orientation provided with support, this is the best angle to get the clip to print accurately, I tried with it on it's side and it didn't fit but in the standing orientation the fit is perfect! I recommend printing with brim…
Replicated a design seen online shopping
Scale the z-axis to size to the required height
A remix of mbmelectronic's model that can be fixed to a wall with screws through the holes
Credit to original uploader Daniel Ríos Linares at https://grabcad.com/library/mop-wringer-1 I just made some edits to make it more 3D printer friendly Category: Household
This single bead dispenser requires three non-printed components: 1xM3*16 hex screw 2xM3*4 hex screw A suitable spring that fits in the chamber, I used a 12 mm diameter x 100 mm spring Watch the below video on how to assemble and use:
A phone holder for cliping to a microphone boom stand. Can be used to read lyrics or chords off phone without having to hold it Category: Audio
Uses 4x M3x16 screws with 4x M3 nuts
Syringe / Luer to StageTip addaptor Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Biology
This frame fits a 2017 Mazda 3. It required a M6 x 10mm bolt to fix to the brackets on the roof of the car. You will also need to find a bar to fix to the frame, this was designed with a square or flat bar in mind. Can be used with a…
A Bead Dispenser for dispensing beads into microtubes in a standard 64 tube format tube rack.
This is the model this box is for https://www.printables.com/model/233328-braille-embosser
This is a lysis bead dispenser that will simultaneously deposit eight lots of beads into tubes or plate in a 96 well format. The design was intended to deposit approx. twelve 1 mm diameter beads. The roller slides into the body and is…
Clips for labeling electronics cables to easily identify which power socket or plug goes where. I have printed this with a combination of flexible and regular resin. For non-flexible prints the "fullbody" file is recommended. Print…
Includes versions if you use the spacer that puts the doorbell on an angle
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
This clamp allows you to fix a vacuum tube hose to a desk to extract dust generated from working with tools. Category: Tools
Board from here: https://www.aliexpress.com/item/1005005514233890.html Was supposed to come with a case but didn't
Flyscreen Frame, Corner Stake & Straight Connector Stake Category: Household
A one way air valve for 125 mm ducting
Never Forget Who You Are in Gallifreyan Category: Signs & Logos
A remix of the base from Illia Dudnyk version
I have made a replica design of the cleaning tool that comes with the Progressive Prepworks Fruit & Vegetable Chopper Category: Kitchen & Dining
Cap for Duratech Needle Nose Pliers
Wall Hook for Dish-matic sponge
I used an 80 mm 5v fan that could be powered by USB. I was also going to make a version with a USB-C port but the part didn't arrive in time. I also used 4 x 8mm M3 brass set nuts with 4 x 20 mm M3 hex bolts. Watch the construction video…
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
A catch-all box tray for holding common tools for use with ThermoFisher LC and MS intruments.
Make your own power bank with vape batteries
After losing several charging cases for various pairs of true wireless earphones, after their cases slid out my pocket commuting to work, I was left with perfectly working earphones but no way to charge them. I made this generic charger…
See my collection for other Thermo models
See my collection for other Thermo models
Contains the full model and a version broken down to be able to be printed in four parts that fit on a 200x200mm print bed. The first file fits on the left side and the second fits on the right. I printed this in glow in the dark PLA to…
A Drill Bit Holder for the ALDI Ferrex Pro power drill
Gridfinity Holder for Magnetizer Demagnetizer Tool
Protective Lens Cover for Mileseey TR256E Thermal Camera
This is a microtube holder rack for barocycler tubes from PBI (Pressure BioSciences Inc.). It also holds two 1.5-2 mL Eppendorf tubes for reagents, and four Barocycler cartridges. The rack in built in a 96 well plate format so that it is…
This tube insert is used as an adaptor for a barocycler tube to make it compatible with equipment sized for a 1.5 or 2 mL Eppendorf tube. Can be used for tissue homogenization, centrifugation, heating and shaking. Category: Biology
Print two of the sides, four of the back and one of the stands. No supports needed,
This box fits both a 280 nm LED corn bulb UV light and a 305 nm lamp. It can be used to contain harmful UV light when performing sterilisation or curing of resin prints. I recommend printing in PETG, the flexibility allows for the corn…
A z-limit switch for the Creality ld-002r that is 3 mm longer for use when installing the wham bam flexible build system. There is also a file for a replacement of the regular size z-limit switch. Category: 3D Printer Parts
Prevent the tip holders breaking from drops with this gaurd
Contains both a single and double holder with rooms for the clips. Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
