Counting matching models…
English church bell as rung in full circle ringing. This model is just under 300mm tall. The frame is only representative as these bells are commonly is sets from 3 bells to 12 bells - or even more. This should be pretty representative of…
This is a model of a bell with a cast iron headstock
The original design of the Ciclop scanner was by BQ Educación, a brand of Educación y Robótica, S.L.. The design of the Ciclop was released as open-source which allows the design to be modified and extended as required. A particular…
I recently had a need to look under the floorboards to check on some pipework and the only easy access was a knothole less than 20mm in diameter. A cheap borescope (£7.00 on eBay) gave a good picture but was difficult to manouvre to see…
This surface conduit/clip was very useful for running the cable to a dashcam next to the rearview mirror on the windscreen of a car with a large expanse of windscreen (Citroen C3 Airdream) For automotive use as above, print in ABS and…
I have recently been using Octoprint along with webcams on two of my printers but became dissatisfied with the traditions methods of holding the camera - Duck tape, Elastic bands and cardboard boxes. Also, it would be nice to be able to…
I needed to grind a small but critical shoulder on a 4mm tap and also cut some tiny metal 'O' rings. This simple clamp adapted a Proxxon 50/E micromot handheld tool into a toolpost grinder for a 10" lathe. This should work for any similar…
Although there are many LCD controllers for the RepRap, there are fewer with a memory card that can easily be removed. Most of the SD adaptors are difficult to mount into a box and the micro SD format is uncomfortably small. Although the…
A more or less standard planetary gearbox Bowden type extruder with an access hole for blowing or brushing swarf from the hobbed bolt without having to remove the filament first. This port is an 8mm hole paralell with the filament path…
This is a cooler module for a 3D printer with multiple liquid cooled hot ends. The design is based readily available and inexpensive 80mm radiator, 80mm fan and 12V BLDC water pump. There is sufficient space in the enclosure to fit some…
Summary This is a stand to hold a Hantek 6022BE USB oscilloscope and an ASUS Nexus 7 tablet. There is also a block to hold the oscilloscope probes, a Power Bank battery and a stylus for fine control of the touch screen on the tablet. STL…
This is an engraver attachment for one of my 3D printers. While it is not likely that it will be directly usable on other printers, it should be able to be modified for other devices. The engraver works wall and can be seen in action on…
I needed to be able to view the two nozzles on a dual-head 3D printer in order to measure the offset between the two. Readily available borescope cameras have a close focus and adequate resolution to allow good accuracy. With the dental…
This lighting assembly was designed to fit a Kyowa SZM stereo microscope and may not fit on other microscopes. The design is presented with both STL files for 3D printing and STEP files which may assist in the adaption of this design to…
A heater for the build stage of a RepRap 3D printer which can be made by the standard home etch technique used for making PCBs This heater has two parallel tracks and can be wired with them in parallel for use on a 12V supply, or wired in…
As I had a lot of nozzles to drill, I felt the need for some visual aid that would allow both views to be seen simultaneously. Fortunately, 3D printing let me build this device very quickly - and the ready availability of cheap USB…
This cooling fan assembly was made because some 3D prints in PLA were not being adequately cooled. The assembly can be swung out of the way to allow access and returned to the starting position where it is held with a magnet. Details of…
These are all currently available results.
