Counting matching models…
As with my other voronoi models, a plane cut should be made somewhere between 0.2 and 2mm from the bottom depending on the scale being printed. You need to have as much of the first layer complete as possible in order to get a successful…
The purpose of a Dogear Shim is to help raise the pickup to its ideal height. Since Dogears are Fixed-height pickups, this is the only way to get around it. Model dimensions for x and y axis are set, you need to adjust the z size to suit…
I decided to have a go at making a model of the F-22 Raptor and this is what I came up with - I also made a basic stand that can be rotated to suit the model and when I printed it, I used a cylinder modifier as the base.
I love voronoi designs, this is a remix of a remix of a penguin. Prints well if rotated to have its tail on the bed and beak pointing up at a 45 degree angle - paint on supports for the end of each wing and the back of the feet and add a…
I had to replace the broken bevel gear on my coffee grinder. This works perfectly Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: No Resolution: .15 Infill: 90 Category: Replacement Parts
I decided to see what a Voronoi Adalinda looked like. Printed on my Mk3 with 0.8mm nozzle. To solve the issue of printing Voronoi without supports, I added an egg under the belly - yes the egg is round and not egg-shaped because everyone…
Can be scaled to any size and printed without supports but the model may need to have a plane cut of upto 2mm depending on the scale it is printed at. When viewing the sliced model, you need to see the majority of the first layer on your…
I recently installed some security cameras on my property and decided to design a warning sign for my driveway. Printed with the MMU - model is separated into all its components so that you can choose your own colour scheme Enjoy and…
Tyre for Landy 4x4 or truck 100mm OD x 35mm wide I designed this in order to print without supports so it has to be mirrored in order to have the tread direction correct for both sides of the car Enjoy! Print Settings Printer Brand: Prusa…
Printed in two interlocking parts to make printing easier. When assembling, the parts need to be firmly pushed the last 1mm to lock them into place. Minimal supports on the build plate required for the small part printed with cross…
This is just a basic representation of the SR71. I made this model to test the input shaping on the MK4. I have included my Stl and also the 3mf that I used with the model split for printing with dowels. The tolerances on the dowels are…
Protective case for Seagate Harddrive. This particular harddrive came out of a MacBook pro but should be good for a range of harddrives
I saw a model a few years ago that could be raced along the floor. Here is my version of it. Blow up a balloon and attach it to the chimney and watch the model fly across the floor The car body needs a few supports, the axles are printed…
Replacement Gear for Kenwood Chef blender Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution: 200 Infill: 50 Filament: Taulman Bridge Nylon Natural Notes: Print with large circle at the base and use…
I bought a cheap plastic greenhouse and needed to ventilate it so I designed this 2 piece vent. It should work well on most materials upto about 8mm thick such as plywood, corflute, card, plastic, etc. The holes are 4mm and I used brass…
Soft Jaws for bench vise with 68cm or 3 inch jaws made with flex filament. I printed this at 245 degrees with a bed temp of 50 degrees Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: 0.2 layer…
Printed with TPU on a smooth sheet, these decals will stick to any smooth surface with a little moisture - ideal for stopping birds from flying into glass windows
For anybody that has travelled to the Far North of New Zealand, the numbers on this clock make perfect sense - time acts strangely up here Designed to wall mount with a standard $2 mechanism from aliexpress, powered by one AA battery…
I was asked by a friend to make a waterproof version of this model
Easy to put together model of the famous RAF Mosquito bomber from WW11 Two sizes are available in 3mf format. If your printer is well-tuned, these parts will fit together snugly. If you want to try bigger scales, go for it but be aware…
My partner wanted some magnetic letters and notes for using on a magnetic whiteboard for teaching students. MMU to the rescue. Letters and notes printed in black and white PLA. 10x5x2 Neodymium magnets glued to the back
I designed this for a local vet to keep medications and paperwork together. It could be used for other applications The tray is secured to the clipboard using 3mm heatset inserts and M3x5 Allen Head Bolts I have included a template for…
Replacement Door release Handle for 1998 Hyundai Lantra Printed in PC for strength. Fits well but needs holes cleaning out for perfect fitment
The source marked this model as adult content.
These are all currently available results.
