Counting matching models…
Used for testing bed level. After noticing defects in the first layer using PETG, this is a helpful guide to achieve smoother results. I suggest sizing down by 50% or even 35% to speed things up. Level bed with the knobs Re-Calibrate Z-…
Hey all, saw this picture in a Voron Facebook group (thanks Nathan!) and thought this would be a funny print. Let me see your makes (and those fancy multicolor prints)! Bleeped and Non-Bleeped versions available. *Update 5/9/24 I've…
E3D V6 fan attachment for 40mm fan. Use 4 M3 screws to secure the fan. Print Settings Printer Brand: TEVO Printer: Tornado Rafts: No Supports: Yes Resolution: .2 Infill: 20 Filament: ESun PETG Clear Notes: Walls - 3 Infill Pattern -…
Tune your printer's retract and bridging features individually or all at the same time. Good luck!
Update: 4/9/25 Included rear skirt for individual plug and switch.
Heavy Duty linear rail stop for MGN12 rails. Easy to print and compact, these use a M3 screw and m4 t-nut to secure it onto the rail. This will be a tight fit but works nicely. Category: 3D Printer Accessories
Custom lids for the filter. 2/19/2026: Added step files for the Voron and Maze lids.
These cable ducts have been re-created to accommodate an inverted electronics setup on a 350mm Voron. They are also thicker all around to prevent breakage which I found happened a lot with the original design. The slots have also been…
Update: An additional knob has been added. "Heavy Knob" will utilize a nut (specifically a nylon lock nut). I've found that the lock nuts work better to keep the bed stabilized and leveled. Tip: Install a normal nut between the spring and…
This is a starlight headliner tool that I created to make it easier for poking holes into a headliner. As anyone knows, this is a long drawn out process. Having the tools necessary to get the project done a bit neater is essential. The…
This is a mount to be used with Mammoth3D's toolhead. I created this mount as I will be using a Sherpa Mini and nozzle cam. I needed something higher to clear the shroud and accommodate an LED at the front. Routing wiring to the LED…
This is a simple but practical skirt mod that relocates the power switch to the front of the printer for easier access. I got tired of reaching around to the back—especially in a tight space—just to turn the printer on or off. I’m using…
Bondtech QR extruder mount for Tevo Tornado. Will work with other printers that have the same hole location in the extruder plate. There is a CR-10 model here on thingiverse that lines up perfectly with the Tevo Tornado so I assume that…
These are all currently available results.
