Counting matching models…
13.02.2024 - Update: I added another magnet cap file for magnets with 10mm diameter that " Robert Hidasi " created and kindly provided to download. 23.09.2023 - Update: I added the magnet cap file that fireant designed and kindly sent to…
Update 05.05.2023: I added a solid version of the design so you can basically choose your wall thickness by setting the perimeters as desired or print solid resp. with sufficient infill if you don't trust your filament ;D…
Little acrobats balancing and stacking game. Printing with more infill will result in heavier acrobats that are easier to stack. Acrobats available with and without smiling face. Can be scaled down for a mini desktop stacking game. Have…
Mini Key chain or backup bottle opener that works well with PLA and prints fast. No coin or additional material needed. It is designed so that the teeth of the bottle cap don't bite into the opener material. So you won't have nasty PLA…
Banana Training Karambit. Print with a good amount of infill for a nice momentum. Have fun printing.
I found this model on cults3d from SLAVCHIK and remixed it with removal of the lowest layer to create a smaller more manageable print. If you need more storage consider downloading the original file. Happy printing!
Cute little Waving Ghost Bookmark that will keep track of your reading progress for you. The shown bookmarks were printed downscaled with 75% for x and y and 50% of the original z height, but it should scale to about any size. Happy…
I modeled this simple cable holder to be printed in TPU and fixed by adhesive tape to it's supporting location. Haven't tested it with TPU yet.
I liked the model “Nerf Half Dart Cutter” by justinsprecher on thingiverse but actually printed the 2 Dart Version b Insurgent79 at the time. I felt like 5 Darts would be the perfect amount for the workflow of cutting darts though with a…
I create a Toroidal Rotor with the interface of the Pocket Copter by agepbiz. Print with .15 to .16 layer height for smooth blades. Happy printing and launching.
This 3 Part design allows you to easily pack and load herb bricks to your Pax vaporizer of choice. The tolerances are forgiving a lot whilst still producing some quality bricks. The brick height depends on the amount of herb material…
A Mini Herb and Spices Scoop. No special settings needed. Happy printing.
As much as I like the K2 clip design I am not a fan of the 3 different interfaces. I always use the “standard” one and therefore often had to rotate the clip to clamp in the filament. With the triangle clip design that issue was solved…
Super Mario coin for your Shopping cart. Print 100 of these for 1Up. Category: Tools
Inspired by darknrg 's Clipper Lighter Case design, I based my model roughly on his dimensions. However I wanted the model to be a little bit more snug, especially in the top area, so I re-sketched the model and changed some angles a bit…
Drill Tool Dust Collector inspired by several existing designs. Prints in under 30 minutes without supports. 65x65mm footprint Usable with up to 10mm Diameter drill bits. Model has 1mm wall thickness. Scalable of course. Happy drilling.
Easy to print LST Clips for your favourite plant. No specific settings needed. I suggest to print in PETG since it is more light resistent and usually more flexible than PLA. Happy printing and growing. Please don't sell these clips…
Cute Kids sand shovel or gardening tool I printed it flat side down with 0.3 mm layer height and it worked great. Smiley face can be imprinted in the sand for fun.
Modern Clipper Lighter sleeve for the standard sized CLIPPER lighters inspired and remixed from Modern Vase by 3DDruckEN Happy prtinting.
Stabilo BOSS Holder for your favorite 4 colors. Happy printing.
Pacman Ghost Beglari Bead to create Beglari Fidget Toy. Can be build with 2 Beads and a short piece of Paracord.
Easy debowl your dosing caps. The other end of the tool fits perfectly into the caps. Just rotate slightly to straighten deformed capsules. Happy printing. Cheers
Easy to print stylish door wedge. I'd suggest PETG or TPU, but PLA ahould be fine too. Happy printing and HODOR.
Simple Drain Lid for 75mm Diameter holes. Use your favorite infill to create the mesh pattern. Happy printing
I remixed this from a pendant wheel model I found in thingiverse and designed the base and cap for the wheel.
Best to print with 0.8mm wall thickness for a more sturdy body. Happy printing and plant watering.
Simple Small Star Fidget Spinner for Diameter 22 and 7mm thick standard skateboard bearings (608) Diameters from 22.2 to 22.5mm available, depending on printer tolerances and desired fit. Happy printing
Print yourself some happy waving hands for your favorite books. Happy printing.
22.03.2023 Update: Removed the burr/radius on top of the studs for more clamping force Uploaded a Solid Model Subtracted 0.2mm from the “roof” to encounter the sagging from bridging --------- Use as key chain and add your favorite 2x2…
Simple Dodecagon Case for your standard Clipper Large lighters. Happy printing.
I found De3DPrintman's Stroopwafel design and created a coaster design out of it. I removed the slight overhangs, centered the pattern and scaled the coaster to a 100 mm diameter. Depending on the filament it looks quite realistic from…
Use either coin or highjackig tool for your next shopping ;) Category: Tools
Dress up with these cute little Skull Earrings. Perfect for Halloween. Happy to see your makes. No specific print settings recommended since the model is flat. Could look great in a glow in the dark filament I assume ;) Happy printing and…
Just some fun variations of the almost iconic toothpaste squeezer design by Spidersky1489. Including: Squeezer with hexagonal hole (obviously) Light and Superlight Squeezer Frog Squeezer Happy printing!
Simple Door Stopper Wedge that can be printed in PLA, PETG or TPU for softer performance ;D Happy printing.
I liked "Sablebadger 3D's" Design but had issues with the ring attaching to the build plate, so I replaced the ring with one that has more surface area and is a bit smoother as well. I printed at 0.28mm layer height and used Prusament PETG.
Tool to easily fill your STORZ & BICKEL capsules for your vaporizer. Works with the Mighty, Crafty and Venty or other vaporizers that can hold the standard capsules from S&B. Feel free to comment on how to improve or alter the design.…
Very simple ball stand for 52.5 mm Diameter Snooker Balls Happy printing
Inspired by the delicous stroopwafels from the netherlands I had to make a one euro sized version that can be used as a shopping cart token. Happy printing and enjoy.
Fun watering can that prints without supports and is much fun for the bathtub and for watering your plants. Print as file is oriented to keep angles in the 45° range. Add a little brim if you are worried about your bed adhesion. Happy…
This is a more classic and elegant looking approach to the balancing acrobats I created some time ago. I felt the need to contribute to the contest, since my model was featured on the printables front page. So I felt quit honored by this…
Smiley Coaster for your beverages - Diameter 107mm Print with Thermochromic PLA and place hot beverage on top for a fun color change effect Happy printing. Enjoy
Cannabis Leaf Cookie Cutter Print in PETG to make cleaning more easy Happy baking!
I tinkered around a little bit with the Prusament Lion low Poly model to create this triple head pot. I changed the chin area a bit to make it work with vase mode. Not perfect but was fun.
STORZ & BICKEL Dosing Capsule Filling Tool with added bottom holes for easy filling of your medical herbs. Cheers
Pacman Ghost Model with space for 10x2mm magnets. Happy printing.
Inspired by the 3-Cup watering can by disser I created this model with very similar geometry. I changed the handle design for a little different look and ergonomics. Prints in around 3h on the P1P. I used the fuzzy skin option for the can…
Famous Magic Trick MASTER OF CHANCE by Lubor Fiedler.
I recommend to print this design in petg. You can set the wall thickness to 0.8mm with a 0.4mm nozzle. I didn't use a brim and had no issues with bed adhesion. Happy printing.
I came across the model of RevHazlett and the remix from Spifer and decided to create a remix as well minimizing the design and making it a bit more suitable for my needs. Printing: For the Fan Cover simply remove all solid surfaces and…
STABILO Woody Pencil Holder to hold and organize 18 Pencils Happy printing and drawing
Bone designed inspired by Episode: Ultimate Rescue: Pups and the Hidden Golden Bones Happy printing.
Fit 16 Euro Cents in the circle segment. There is only one solution to this. Happy puzzeling. Please don't post the solution here, so others can enjoy the riddle as well. Cheers
My uncle made me a wooden rifle when I was a little kid. I took the design as an inspiration to create a replica out of plastic. I came up with an easy dove tail connection with 0.2mm gap for easy assembly. The middle portion has a small…
Fun stacking and balancing toy for kids. Stack and arrange as many figurines as you like. Endless building fun. Please share your makes and different ways of stacking. Happy printing!
Painting Risers that lift the piece 3 cm above the surface. The risers can be screwed down to the surface with short screws for extra stability. Happy printing and painting.
Inspired by clockspring 's Button Jar Lid I wanted to create an easy printable lid for those 62mm lugged jars. If you measure the outer diameter of those jars without the lugs it should actually measure about 58.8mm. I gave the tabs a…
Donut Backgammon Checker 36mm diameter, 8mm height
Go bananas with these fun stackable model with endless possibilities. A skill game for kids or a fun desk toy. Blue Banana in the picture is 100% the yellow and pink ones are 50% sized. Happy printing and stacking.
Coffee Scoop that holds about 7 Grams of coffee beans No supports needed Happy printing.
I wanted a small simple ringholder, so I used a gridfinity crate as base and added the dome to hold the ring. I then converted the model so a low poly state that I liked. Happy printing.
Tesseract Token Bowl to hold your board game items or smal items in general. Happy printing.
Glitch Tissue Box for 130x130x130mm Boxes remixed from vexanix Glitch Planter design. Happy printing.
Spare part for IKEA Skydrag Mount that prints fast without supports. Happy printing and mounting.
Inspired by mantuxas https://www.printables.com/model/311671-minimalist-christmas-tree Minimalist Christmas Tree Design I created a version with a hexagram base just for fun. It can be printed in vase mode as well or with a little infill.…
Sagrotan Samt Schaum Pumpkopf
Simple small set of Stacking Cups for kids
Modern looking Bookends with piggy bank slot to add coins or washers for extra weight. Happy printing.
Radiator Hook for towels for 25.4mm diameter ribs with 36mm center distance Category: Bathroom
Fan Holder for 50x50x10mm Computer fans that works with the "Rail LED holder system from SuperGreenLabs: https://www.supergreenlab.com/product/rail-holder-kit Instead of the LED Holder you can attach the FAN Holder. Cheers
Climbing brush with changeable brush head Category: Sport & Outdoors
Small ashtray that can be used with empty tealight candle casings for easy disposal and recycling purposes. The models in pictures were printed with fuzzy skin mode. It could also be used with an LED tealight I assume. Don't use an actual…
Mark your mini WECK glasses with these little plates that fit into the indent of the glass cover.
Organize your CO2 Bottles for your Soda Stream Holds 3 Bottles without them falling over. HAPPY PRINTING!
Please accept all cookies ;D Happy baking.
Softer spring for the switch if you want to print it in 200% scale Category: Mechanical Toys
These are all currently available results.
![Nerf Half Length Dart Cutter [30, 36 & 38mm]](https://media.printables.com/media/prints/457744/images/3763999_e2c77853-c925-4696-8b94-84646396f999/img_20230420_224512.jpg)
