Counting matching models…
Hasselback potato cutter (Slicer) - Version 2 Included is Step File. I'm using with New Prusa Slicer that Does NOT need STL files to print This is version 2 because version one wasn't working that good. I made a little more stronger with…
Version 2 Made changes to Slicer from 150mm tall to 200mm tall. Bread slicer for home made bread. I just made longer glides and brackets. Platform is 60mm wide and you can print 2 of them if you want to. Original Idea from…
NOTE: New Version 3 is up.. https://www.printables.com/model/420141-mount-for-beagle-camera-ver-3 Update: Added better way to mount the camera. You need use all 3 Parts and two M3-10mm screws Plate and Plate Bracket are glue together and…
Fruit Fly Trap. Is to be used with a "Better Than Bouillon" 8 oz Jar. Added New Version Cover that screws on. Print Settings Printer: JGAurora A5S Rafts: No Supports: No Resolution: .20 Infill: 25 Filament: Generic Any White Category:…
Home Bread Slicer Guide Ver.3 This one has 3 section selector for how slice of a bread is. 15mm, 18mm and 21mm. ADDED 2 SPACERS 3-2 and 4-3. To slide on top of the stopper to create thinner slices... Yes only one slice at a time. There is…
Picnic Table Clamp. Clamp With Hooks that can be used to hold shopping bag as a garbage look at: https://www.thingiverse.com/thing:4915482 Print Settings Printer: JGAurora A5S Rafts: Doesn't Matter Supports: No Resolution: .20 Infill: 100…
UPDATE: To My Flag Pole. Change my flag holders to be used with “fiberglass marking stakes” which they are ¼" Dia. (About 6.5mm). They are Glue to the holders. I used hot glue so if I need it I can remove easy. Or you can find something…
Added a V2. Make a hook a little bit longer and made a bump so the bag can't come out easy Picnic Table Clamp With Hook that can be used to hang a grocery store bag to use as garbage bag. Using 2 of them will work better then one. JUST A…
If you like my design please leave LIKES…. Thanks ADDED Second Design (8-3-23) Added Beagle Camera Ver. 2 Mount… and Plate Arm For Ver. 2 Mount (8-2-23) Version 3 of the Beagle Camera Mount. Made this to minimize confusion plus I added…
UPDATE: Added a tubing holder by Sensor. I hated the filament runout on K1 max. I run out of filament, and it took so much time just to remove and then put new filament. So, I made my own setup and put the sensor outside. One picture…
Added New Version. It has double trap for fly. Fruit Fly Cover ver. 2 use on "Better Than Bouillon" 8oz. empty jar. This one is screw on type or you can use one just pressed on from https://www.printables.com/model/195594-fruit-fly-trap
A New Cover and 5 bottle paint holder 2fl oz. This Cover is used with "Anchor Hocking 4 cup Glass Storage Container" purchased at Walmart for less then $5.00 "…
My Cooling Ducts using Fans 5015 24V https://www.amazon.com/gp/product/B079BPS9Q8/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 The Hot End Duct ONLY was Remixed (Completely Redrawn) from https://www.thingiverse.com/thing:2994069 Print…
This is E3D--V6 Hotend Mount for JGAurora A5S (A5). Main Body was remixed from https://www.thingiverse.com/thing:3828989 It was remixed also but it had a Step File that It could be easy to modified. The whole thing can be used in full…
This is my version of Garbage Disposal Cover. I know that I always had a problem when just running water the water will start filling up and it would not drain. The reason is that there is no air going in because water would cover all the…
All models a in STP files so you can easy modify (I think Every One should upload in this format). But I also uploaded STL files Just so you can see the models. Plus I don't know why but they making them that holds 5 eggs. I know that in…
My Youtube Test of the Chain Link UPDATE: Add a New Version of the Adapter, Adapter-Lock, Link, Link-Lock, Loop, Last Link . The Older Version was working but it was sagging in the center. This new version will keep that more natural.…
My remixed for my Cooling Setup https://www.thingiverse.com/thing:4553114 This is completely redrawn from his design.... There was a lot of problems that need to be redrawn to make it work for my cooling system..... But can be used on…
Those are leg sliders for walker. 3 version of them to pick. Inner dimension is for 29 mm. leg Files are in STP (I think everyone should included for easy fix) and stl so it would display.
UPDATE: July 24. 2020 I uploaded Version 4 of the adapter. The reason is that I need to make cut so my new Cooling Fan can fit in home X position. This is an Add on to the Chain Cable from https://www.thingiverse.com/thing:3954315 It…
Wood Burning Tips Container to keep Solder and wood burning tips. Printed without infill just I used 6 walls. But it's up to you about infill. Printed with 0.30 resolution. Also I would glue a sponge or something to the bottom of the…
This is a remake. I had to redo files and created Step type file for easy modification. I used a magnet from Amazon “FINDMAG 150 Pcs Fridge Magnets, 6x3mm Rare Earth Refrigerator Magnets” “ Amazon.com: FINDMAG 150 Pcs Fridge Magnets,…
I made this one for my Creality camera. The one that came with printer I'm not crazy about it. With this one I have a better view of my print plate. Use two way tape and position bracket to your likings. The camera is plug in to the USB…
This is Version 2. You can move up or down I made this one for my Creality camera. The one that came with printer I'm not crazy about it. With this one I have a better view of my print plate. Use two way tape and position bracket to your…
This is a Shelf (Container Holder) for Home made Rubbermaid 21cups Dry Box Container. Can be used with " https://www.thingiverse.com/thing:5371563 " or any other one. This can be mounted on the side of the printer or cabinet like in my…
This is a Remix of the REmix because there was a STEP file included so was easier to make modification. The original posted had a problem with Z-Axis that wiring would be crashed in the frame when going all the way to 320mm. This Remix of…
Added Step File Added Half Cover to try reduce noise from original fan.... This is 2 fan cooling system JGAurora A5S Using 5015 24V Fans with the original one.
This is my Camera mount using 1/4x20 Screw. So you can mount your own camera mounts. The Camera mounts on Bed Slider. Is modular for easy assemble and Also for easy removal when need to calibrate bed or any other purpose This way it's not…
UPDATE: I added a Small Parts Drawer that can be used with this Tool Holder. https://www.thingiverse.com/thing:4412920 Update: Added a Allen Wrench Spacer so the Allen Wrench will not fall of. Same With Tool Spacer. Both can be printed…
Customized version of https://www.thingiverse.com/thing:3280926 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3280926 Instructions Using the following options: hd = 50 ed1 = 20 h1 = 5 ed2 = 45 h2 = 25…
This is a wire Clamp that can be two way taped for holding wires. Included Step Files so you can easy make changes
These are all currently available results.
