Counting matching models…
This model inherits the characteristics of PsychProd's original model: Fast print speed due to the clever basket design, great air permeability, and the option to add space for a hygrometer. In-spool locking: The one thing that bothered…
I re-implemented the idea of Blue to see if I could cover more of the gap, and as I was messing around with the dimensions, I found this geometry, which fits so perfectly that it snaps into place without the need for magnets or any other…
This project upgrades your Core One with an internal recirculating HEPA and activated carbon filter. This is achieved without major modifications to your machine, as the filter fits into the left rear corner and mount directly onto the…
This is a protector for your PS4 controller (i.e., the Dualshock 4). It covers both analogue sticks, all buttons, and also includes a shroud for the triggers. It is kept in place with a simple strap that is printed flat without any…
Edit: This mod is confirmed to not conflict with the Core One+ automatic vent control. This is a remix of the excellent nozzle wiper by Ed and PCR, which adds a slot to use a spare M3nS nut from the Core One assembly kit to fix the part…
I was unhappy about the amount of desiccant I could fit in the built-in slots in the Eibos Polyphemus dryer, so I made this insert canister to hold more! Highlights: - Holds 250g of desiccant - Fits securely in the built-in slots - Good…
Change log: - Mounts for the power and control electronics have been added. These now neatly strap on to the back of the printer. See link in the BOM for the PSU mount. - Links have been updated, and I have added variations of the fan…
This is a remix of dancan13f's excellent GPIO and wifi cover. Specifically, it is a remix of his V2 model. In addition to holding both the GPIO and wifi modules, this remix adds loops for zip ties to attach to. The idea is that zip ties…
This is a set of models that can be printed in TPU to improve the airtightness of the Eibos Polyphemus. I don't have a measure for how well they work, but they might help a bit. Keep in mind that this does in now way prevent moisture from…
Wall mount for the Oral-B iO series electrical toothbrush. I couldn't find any that would fit a vertical Europlug, so I designed one for myself. The plug is held by two clamps. The clamps are partially detached from the main body so they…
I made a couple of modules to fit the modular Core One side storage system by jonnieZG. Specifically, I have made the following modules: Front module for the Prusa brass brush, the 6 hex wrenches from the Core One kit, and the Noga…
This allows you to mount an Eibos Series X: Easdry filament dryer to your Core One. The mount replaces the standard bayonet-style spool holder. However, you do not have to forgo the standard spool holder, because the screw-on attachment…
Edit: After doing this mod, I did some math and realized that it is really the width of the airgap that drives the effect of this mod. Therefore, the impact can be doubled or tripled by upping the gap from 1mm to e.g. 3mm or 5mm. I will…
My new Shimano brake cable casing did not fit with my old Shimano brake levers. This is fair, as my bike is an old retro model that's probably 30 years old. To adapt to the modern bikes and keep this beautiful old bike going, I designed…
This handle is a replacement for the 1.5L Bodum tea pot handle. It is made to be fixed in place with a single M4 screw and an M4 captive nut. This also makes the design able to accommodate slight variations in the diameter as the screw…
This is a mount I made to attach a battery-operatored tap and a detachable sink to the table in my camper van. It is made to fit a table of 2.8 cm thickness, but below I have attached a link to the Onshape project so the files can be…
These are all currently available results.
