P
PrintablesLukeOne
Mighty Vaporizer Stand with Brush Holder (UPDATE v2 with tighter tolerances)
Have Fun EDIT: Added a v2 with tighter tolerances. Category: Organization
- Downloads
- 306
- Likes
- 18
- Rating
- 5
All models
Counting matching models…
P
PrintablesLukeOne
Mighty Vaporizer Mouthpiece
Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
- Downloads
- 300
- Likes
- 31
- Rating
- 4
P
PrintablesLukeOne
Volcano Vaporizer Mouthpiece
Have Fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts
- Downloads
- 153
- Likes
- 26
- Rating
- 5
P
PrintablesLukeOne
40mm Fan Airflow Director
I use it to turn the airflow of my extruder fan away from my heatbed, especially for ABS, ASA and Nylon. Have fun. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes Filament: Generic ABS /…
- Downloads
- 126
- Likes
- 17
- Rating
- 0
P
PrintablesLukeOne
S&B Plenty Vaporizer Clip Stand
Little clip stand addon for the Plenty vaporizer by Storz & Bickel. Just clip one or two of them under the Plenty and it won't fall over anymore. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter…
- Downloads
- 101
- Likes
- 3
- Rating
- 4
P
PrintablesLukeOne
Ender 3 Pro - SKR 1.4 (Turbo) + Mosfet case
The case does fit on the original case place on the E3 Pro, its just a bit higher and has more lenght. The original 4010 fan from creality is working fine on this. Mosfet Board with 70x45mm fits. The spacers are for the M3 screws if they…
- Downloads
- 74
- Likes
- 6
- Rating
- 0
P
PrintablesLukeOne
DynaVap M Stand
Big DynaVap M Stand. Designed it quick and dirty, so dont expect to much. Category: Tool Holders & Boxes
- Downloads
- 55
- Likes
- 8
- Rating
- 0
P
PrintablesLukeOne
Wallmount for 5 Arrows (10.4mm / 0.41 Inch)
Made a simple wallmount for my carbonarrows. They have got 10.4mm in diameter (Roughly 0.4 Inches). Print 2 of them for a horizontal mount. Have fun. Print Settings Printer: Prusa I3 Rafts: Doesn't Matter Supports: Doesn't Matter…
- Downloads
- 45
- Likes
- 11
- Rating
- 5
P
PrintablesLukeOne
Plenty Vaporizer Mouthpiece
A replacement mouthpiece for the Plenty Vaporizer. Have fun! Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Category: Replacement Parts
- Downloads
- 38
- Likes
- 1
- Rating
- 0
P
PrintablesLukeOne
Storz & Bickel - Mighty - Stand
Its a W for W**D or a flipped M for Mighty, you decide ;) Have fun! EDIT: I see the preview is turned wrong... change X Axe to 90° to print without support. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: Doesn't Matter…
- Downloads
- 38
- Likes
- 4
- Rating
- 0
P
PrintablesLukeOne
(BTT) TFT35 v2 Display Mount
Screwable Display Mount for a BTT TFT35 V2. You will need 2x M5x35mm hex screws 2x M5 nuts 2x springs (mine measure 15mm height x 9mm diameter if they are expanded). 4x M4 woodscrews for the mount 4x M3x10 screws + M3 nuts for the display…
- Downloads
- 28
- Likes
- 3
- Rating
- 0
P
PrintablesLukeOne
TS 100 Tip Box (12 Tips)
for 12 tips Have fun! Print Settings Infill: 10% Category: Organization
- Downloads
- 28
- Likes
- 2
- Rating
- 0
P
PrintablesLukeOne
Simple Wallmount Wide Hook M4
A simple, wide and wallmounted hook with a single M4 screw. Perfect to organize cables on the wall. Or just mount anything with less than 5cm width. Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: Doesn't Matter Supports: No…
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesLukeOne
L3D - Bigtreetech SKR 1.4 (Turbo) + MKS Hotbed Mos+ v1.1 Casing with Magentic Lid
A case for a SKR v1.4 (Turbo) Board and a MKS Hotbed Mos+ v1.1 Mosfet. Needs 1x 4010/4015/4020 Fan, 4x 6x1 Magnets, 8x M3x6 Screws + 8x DIN 934 M3 Nuts and 4 Screws (+Nuts) (Max. M4) for the Fan. Supports are optional if you master your…
- Downloads
- 18
- Likes
- 0
- Rating
- 0
P
PrintablesLukeOne
Design Coathook - M4 Screws
I just designed a coathook for my actual needs. Enjoy and feel free to modify and share. Print Settings Printer Brand: RepRap Printer: Prusa I3 Rafts: Doesn't Matter Supports: Yes Resolution: 1.0 Infill: 20% Notes: Slic3r may builds dense…
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesLukeOne
Stronk Whoop V1 Frame
The stronk whoop. This edition is for boldclash BWHOOP B03 PRO stuff (same motors and AIO board). Use two rubberbands to secure your battery underneath. Never printed or tested. I don't even know if its too much weight. But it should be…
- Downloads
- 16
- Likes
- 3
- Rating
- 0
P
PrintablesLukeOne
Lauscherschoner - Ear Protector for Medical Masks - V1
To protect your lauschers! Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Infill: 20% Notes: Tested with PETG, but should work with nearly any filament.…
- Downloads
- 16
- Likes
- 2
- Rating
- 0
P
PrintablesLukeOne
Antigen Rapid Test Tube Holder
A little holder for those antigen test tubes. Have fun! Category: Tool Holders & Boxes
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesLukeOne
Aucma Food Processor Dough Hook Shield
You'll need 2x M3 screws (20mm) and 2x M3 nuts (DIN 934). Have Fun! Category: Kitchen & Dining
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesLukeOne
My Brain (Converted MRI Scan)
I found a old MRI scan of my brain and converted it to STL. A tiny bit of the top of my brain is cut off, maybe the doc didn't like me and canceled the scan before it finished :D but it gives a flat surface and doesn't really stand out if…
- Downloads
- 9
- Likes
- 4
- Rating
- 0
These are all currently available results.