Counting matching models…
4 inch to 6 inch (99 to 153 actual metric) adapter for attaching 4 inch flexible duct to inline fan. Has grooves for hose clamps. printed in vase mode in PETG. 0.6 nozzle with Line width 1.24 for all lines. Use line width 0.8 if using 0.4…
just a simple single port wall plate for ethernet with a RJ 45 keystone
Remixed the excellent Bambu Lab X1C plateholder to hold the smaller A1Mini. Easy print-generic PLA fits Diagonally on the A1 Mini plate. Printed in about 1 ½ hour. No supports, brim helps. Recommend Lidabaus' excellent remixes if the…
A simple end cap for the 1/2 inch conduit used in the excellent RepRack spool storage system-its a snug fit..might have to tap it in with a mallet. Printed well in PETG and ABS with default settings on a Bambulabs X1C on a high…
Needed a 90 degree 4 inch outer diameter elbow adapter for a vent hose for my printer exhaust . Has grooves to seat hose clamps securely .
Just a simple adapter/reducer to connect a 2 inch to 4 inch duct with grooves for the hoseclamps
Yet another scrub Daddy/Mommy holder! There are many good models for this very popular scrub sponge but I wanted to add a little whimsy and a deeper drip tray. No AMS needed can be done by layer swaps. Start with black, change filament to…
Simple 2 tier Spice rack 260 mm long. Interlocking. 3 fit in most cabinets. Printed in Sunlu grey PETG. 0.4 mm nozzle. 15% gyroid infill. 4 walls. No supports. Print upright. 3mf file for Bambu has 3 + a 40 mm additional piece. 20 hour…
I needed a way to mount a 4 inch metal outlet box to a round pole. Attaches to a round pole approx 76mm diameter with 2 large (12 inch) zip ties. Note please check your local codes before using for any electrical work and use at your own…
Glow in the dark jellyfish that can be stuck on the ceiling or wall.Quick easy print. Only 22 grams of glow in the dark filament. Be careful when removing from plate as these are delicate
Needed a skadis multimeter mount - Remixed /enlarged @Paul_295951 s excellent Skadis Multimeter Mount to fit my Fluke 117. printed well in PETG -a bit snug on the board
Made this playful gift for a cat lover friend. Just a simple barrel that can be used to keep q tips pens etc with a cat appearing to push it over. Printed in hatchbox burnt titanium PETG.
I needed to connect a 5 inch OD and 4 inch OD flexible duct -the actual sizes were 4.5 and 3.9 inches- so created a simple elbow adapter and have included the fusion 360 file that you can change the user parameters to the diameters you…
Beautiful, accurate model of African elephant. printed in Polymaker dual extrusion PLA (red-black) with fuzzy skin. Used tree supports sliced at 0.2 mm layer height sliced in Bambu studio. STL, Step and Bambu 3mf files included. 3mf has 3…
Needed a Y splitter / adapter for my 3 inch exhaust duct from my two printers. Could not find a model I liked. Commercial models on Amazon were about $12 and would take a week to arrive. So designed and printed this in Fusion 360. Printed…
The intent of this collection is educational -to stimulate interest and learning in microbiology / health sciences especially among younger students. If there is interest I will create additional examples of different microbes such as…
There are several beautiful coaster models on here and most are round and 100 mm aprox. They tend to slip and slide especially if printed in silk PLA or PETG. So, I designed a simple textured base which is best printed in TPU that adds…
Easy non destructive way to mount a skadis board to the inside of a closet door. The over the door hangers are designed to snap into the groove on a skadis mounting rail. The board can then be mounted to the rail with the supplied…
Just added skadis pegs to the original model base
Adapted for skadis board to hold 2 epoxy syringes for JB weld but might work for other brands.
use the excellent M3 t nuts found here Skadis M3 T-nuts mounting - no M3 nuts or tapping needed by Arough | Download free STL model | Printables.com
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Start with red At layer 6 swap to Yellow At layer 12 swap to Black At layer 13 swap to Blue Gray At layer 14 swap to Green At layer 18 swap to Yellow At layer…
Simple lens cover for Canon EF 400mm f/4 DO IS II USM Lens - I couldn't find one so designed and printed in PETG
Discover the innovative and functional 3D model design of assorted cabinet door hangers and hooks These over the door hooks, meticulously designed for hanging pot holders and trivets, display high versatility with two separate parts. The…
The Breville Nespresso Essenza machine is a great device with a tiny footptint. However due to its small size the wastewater reservoir often overflows creating a mess on the counter. I designed this overflow/spill tray to address that…
This is a skadis mount I designed for a heated hairbrush approx 30 mm diameter. It has 2 pegs and is fairly sturdy. Might work for other similarly sized/shaped items.
A tiny latch that snap fits on the lip of the bin with a 3x6 mm magnet (fiction fit) that holds on to the lid just enough to keep the lid from accidentally sliding off. Its loose by design but you can glue it in with a tiny bit of CA glue…
Simple box to store checker /Draught coins/pieces with well diameter of 28.5 mm, designed to fit pieces found here: Checker - classic and stackable by CaptFerrall | Download free STL model | Printables.com
The Breville Nespresso Essenza machine is a great device with a tiny footptint. However due to its small size the wastewater reservoir often overflows creating a mess on the counter. I had designed an overflow/spill tray to address that…
Designed it to use this inexpensive light from Amazon that is dusk to dawn https://a.co/d/by3ifDI. Just pass it through the opening in the base aligning the light sensor and plug the base in. You can use a bit of CA glue (optional) Then…
Just a scan of a real eggplant from my garden. The middle model is printed in polymaker poly terra army purple with the stem in bambu matte green. The other models are painted
"A final salute to our Captain." 🖖✨ This 3D-printable model is a multi-part, color-separated remix of the classic Captain Jean-Luc Picard statue originally designed by Mers_Art . This specific model is lovingly posted as a solemn memorial…
## 🎄 Magical Musical Fireplace 🔥 The PERFECT beginner-friendly 3D print! Stream holiday music through an integrated Bluetooth speaker or add mesmerizing RGB color effects. ✨ BEGINNER APPROVED: • 95% single-color prints • NO supports…
Just a optional base with a slot that friction fits the lower arm for this excellently designed minimalist can holder. Helps with heavier cans. Printed in polymaker polychroma Cope but should work in PLA or PETG
Approximately 1.5 inch /30 mm dia steel balls are perfect to weigh down the spool the AMS-I bought them from Amazon. 7Pcs 1.5''inch Bearing Balls Steel Ball Bearing 38mm Assorted Loose Bicycle Bearing Balls 1-1/2"…: Amazon.com: Industrial…
This is a custom gift box designed for the fireplace ornament that can be found here: https://www.printables.com/model/1506174-christmas-fire-place-with-bluetooth-speaker There are two versions of the lid, one is a single color debossed…
These are all currently available results.
