Counting matching models…
cord tensioner.1 = grey one cord tensioner.2 = orange one Layer height: 0.2mm Wall thickness: 1mm Wall line count: 2 Infill: 100% Skirt/brim/raft: No Support: No
A simple turntable for painting models/3d parts etc. No bearings needed. Just put all the parts together. I used super glue to fix body1 and body2 together. Print "body2.stl" with max infill. Gear ratio is 1:2 This turntable is strong…
Valve handle replacement 150mm X 37mm X 15mm Below are the settings I used: Material: PLA Layer height: 0.3 mm Wall thickness: 1 mm Wall line count: 2 Infill: 50% Brim: NO Support: NO
A regular spring is needed: Diameter: 4-4,5 mm Height: 7 mm Assembled dimensions: Diameter: 9 mm Height: 15 mm Below are the settings I used: Material: PLA Layer height: 0.2 mm Wall thickness: 1 mm Wall line count: 2 Infill: 20% Brim: 2…
This is a hook designed for doors with 40mm thickness. It can be used alone or with optional extension. Depending on your infill settings you can increase extension count. I only tested with 1 extension and it's enough for multiple things…
Double battery case for 18650 batteries that are 65mm long. Cap is snug fit. Print the body vertically. Nozzle: 0.4mm Layer height: 0.2mm Wall thickness: 0.8mm Wall line count: 2 Bottom/top layers: 3 Infill: >10% Skirt/brim/raft: No…
A slim notes and pen holder for fridges. Humans can use too! There are 3 slots for magnets. I used 2 neodymium magnets (2x10mm) and super glued both of them in place. Printed with PLA 0.2mm layer height No supports
There are 4 versions available. Inner diameter ø80mm Outer diameter ø90mm Height 5.5mm3 Printed with PLA, 2 walls, no supports, infill 20%
These are all currently available results.
