Counting matching models…
Github now: Sovol SV08 - Optimized G-Code / Macro.cfg / printer.cfg and highspeed settings PETG Further releases and instructions on GITHUB: https://github.com/kampfwuffi/Sovol-SV08-Optimized-Macros HOW HARD IS IT TO IMPLEMENT? Basically…
The tool is a remix of the fantastic original model, which is super easy to print and works great. It has been redesigned to fit Parkside (Lidl brand) AC Multi-Tool "Dremel" tool and adds additional features. For small drill bits push the…
These are easy slide in/out storage boxes which have hexagon patterns on it. It is a remix version. It is meant to be stacked or standalone to organize a fridge, desk, bedside table etc. There are 3 versions: Solid base with small front…
This remixed model allows you to move the filament reel and the filament sensor lower down the side of the printer. It reduces the overall height and width of the printer. It uses the stock spool mounting parts plus one 10mm wood-screw to…
This is a remix for Sovol SV08 of the original K1 toolholder from Smutje: A permanently mounted tool holder for the Sovol SV08 printer to store the supplied tools, USB sticks and even calipers. Only requires the removal of three panel…
Remix of camera reposition for Sovol SV08 Takes a M3 threaded heat insert in the center. Make sure you set it at the correct angle, don't just melt right thru it. Camera cable is just long enough, may need some cable adjustment. Flip the…
This is a remix of “Printing Mario” AirBadgeTag. Snap an AirTag (2021) in from the inside. Then slide in your ID card. Find your ID card with “Find My” App. This badge holder was printed with supports and brim in PETG with 0.6 mm nozzle.
Remix of independent fan holder for SV08. Same like variant from Filip Luchianenco plus additional modifications. See differences. Printable with 0.6mm nozzle and no supports. Lay front side flat on bed.
This is a remix to be able to add a mesh system with more distance to the fan blades. 120mm fan compatible Same license as original
Remix of "Cable Hook" to hang cables (e.g. USB-A, USB-C, ...). Wall mount with double sided tape. Printed with PETG without support, i guess any other filament will do too. No supports required, only brim if it doesn't stick on the plate.
This is a remix of the adapter designed specifically for the Aqara U200 (Lite) smart lock , allowing it to be installed flush against doors (EU-Version) . The Aqara U200 will sit flat against the door surface. This adapter fills that gap,…
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. Compatible with CURVER INFINITY 11L and 17L boxes (without lids) Box dimensions: L35,6 x B26,6mm Remixed from IKEA Trofast rail system. LONGSIDE and NO LONGSIDE…
a good way to keep things organized and well kept , can stack and combine This is a remix to make it fit under a Sovol SH01 filament dryer. I use it as filament waste box. Print without supports, needs only orientation change in slicer…
Storage Boxes with beveled edges in different sizes: 3 different sizes, you can additionally scale them as you want in slicer. 173x99mm 210x150mm 273x173mm Print as is, add brim to avoid warping. Printed with Elegoo Rapid PETG white (matte)
Hexagonal plate cover with distance feet Use 4 screws to mount it.
Universal Milk Foam Frother Wall Mount Or Stand. This is a remix to enhance compatibility and usability. Simply add double sided tape and mount anywhere. Print normal with bottom on the plate. No support required.
I loved the design from imurfathersimba, but unfortunately, the iPhone 13 mini did not fit on it cause of the camera bump distance. So I used some design cues and redesigned it to fit my needs. I also added a spot at the bottom to hold…
This is a remix from Ibot_3D to fit a e.g. 120mm fan to the base plate of the Sovol SV08 printer. Attention: This is for a hardware mod to replace the loud & small mainboard fan with a bigger silent fan. You will lose your guarantee and…
This is a remix of Dimas Magnetic Box. My printer has an aluminium frame and therefore the magnetic box doesn't stick to it. So i made this remix with optional magnetic counterpart to make it attach to aluminium framed walls. A Magnetic…
Thickness 8,9 mm so when you need it thicker or thinner und can change the Z in the Slicer. Fits EVVA door plate which is 54mm wide and 9mm thick.
Rails for Under Desk Storage Bins / Boxes. Left, right and center rails. I use simple square baking casseroles with side lips. Remixed from IKEA Trofast rail system. Print center rail sideways to get a small bridge without need for…
Magsafe iPhone and Airpods Pro2 Dock - Mount for openGrid Multiconnect - Swivel Charging works for Airpods2+ Case in vertical position and even iPhone 13mini which has camera lenses near the magsafe magnet ring. It fits for 2nd gen…
Compact honeycomb style bit holder for 1/4" hex bits and tool tray. Fits into LIDL Parkside bit box. Including a separate small box for nut wrenches. The hex bit storage is optimized for lowest space, to fit many tools inside the box. So…
These are all currently available results.
