Counting matching models…
An improved version of this model is available at: Hundreds of Metric Hex Screws Version 2 The screws are inspired by DIN 933 / ISO 4017 metric screws with hexagonal head and long threads. The standard screw design has been slightly…
I added a tolerance of 0.2 mm to the thread diameter in order to compensate for printer tolerances. Print with small layer height, e.g. a maximum of 0.15 mm for a 0.4 mm nozzle. Please find screws for the nuts here:…
These screws are inspired by ISO 8765 metric screws but they have standard pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
Complete set of metric nuts. The improved thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are big eough for the printer. Print with low layer thickness, e.g. with a layer…
The screws are inspired by DIN 912/ISO 4762 metric screws with cylindrical head and hexagon socket and long threads. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard…
The screws are inspired by DIN 931 metric screws with hexagonal head and partial threads. My inproved thread design should fit without tolerances. Please print with low layer height, e.g. max. 0.15 mm for a 0.4 mm nozzle. Please be…
Complete set of metric nuts. The diameter is 0.2 mm above the nominal diameter in order to compensate for filament printer tolerances. Print with 0.15 mm layer thickness or less. I recommend to print perimeters outside-in, not inside-out…
The screws are inspired by DIN 7991 metric screws with countersunk head and allenkey socket. My new thread desing has improved thread geometry and does not require diameter tolerance with respect to the standard dimensions any longer.…
A large set of metric dome head screws with partial threads inspired by ISO 7380. The standard design has been modified for easy printing. The improved thread design has a maximum tolerance of 2.5 µm. It should well fit without…
The screws are inspired by DIN 913 metric grub screws with hexagonal socket. The screws come with my improved thread geometry and should well fit without considering printing tolerances. In case they do not please report! Please print…
Complete set of metric flat nuts. The design has been inspired by DIN 936. The thread geometry has a precision of 2.5µm. The thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are…
General purpose square metric nuts. The design is inspired by DIN 562. My improved thread geometry does not require tolerances in the design. Printed and tested on MK4S with PLA. Please report, how the nuts fit with your printer.
These screws are inspired by DIN 921 metric flat head allen screws. As I could not find standard dimensions for some of the rarely used screw variants, I decided to complete them with best guess estimations. The longer screws have partial…
Complete set of metric fine pitch nuts inspired by ISO 261 and ISO 262. The improved thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are big eough for the printer. Print with low…
These screws are inspired by ISO 8765 metric screws and they have metric fine pitch threads . They come with hexagonal heads, that are slightly bevelled on one side and contain a washer-like elevation on the other side. The longer screws…
These screws are inspired by DINE6921 metric screws with hex flange head and they have metric fine pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…
These nuts are to designed to match DIN 921 metric flat head screws. To be used e.g. with body connector screws. My inproved thread design has an accuracy of 2.5µm and should fit without tolerances. Please print with low layer height,…
M1, M1.6, M2, M2.5, M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36, M39, M42, ..., M64
These screws are inspired by DIN 964 slotted raised countersunk head screws. The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without tolerances. Please print with low layer height,…
Metric washers according to DIN 125 Form A. This model has been requested by Fsh.
These are metric inner threads, exactly as if they were part of a nut. They can be subtracted from your design. You can use them to create a special custom-design nut. You can use them to mount your design or to attach something to it. My…
Hundreds of UNC hex bolts with partial threads inspired by ASME B18.2.1. The thread lengths for the smaller sizes are not covered by ASME B18.2.1 and have been copied from ASME B18.6.3. All threads comply ANSI/ASME B1.1 with an accuracy…
I receommend PLA two color print. A bigger version of the radius measurement tool is available at https://www.printables.com/model/1343346-edge-radius-measurement-tool-large-supportless
These screws are inspired by DINE6921 metric screws with hex flange head and they have metric standard pitch threads . The longer screws have partial threads. My inproved thread design has an accuracy of 2.5µm and should fit without…
Metric washers with one-side bevel according to DIN 125 Form B. This model has been requested by Fsh.
Try which one fits the best and read the number. The numbers indicate millimeters.
These are metric outer threads, exactly as if they were part of a screw. They can be added to your design. You can use them to create a special custom-design screw. You can use them to mount your design or to attach something to it. My V2…
Unc Acorn Dome Nut These acorn dome nuts provide a decorative finish while securing threaded connections. Ideal for visible applications where aesthetics matter, such as furniture assembly, decorative hardware, and consumer products.…
Complete set of UNC standard hex nuts. The bigger ones are based on ASME B18.2.2, while the smaller ones are based on ASME B18.6.3. All threads comply ANSI/ASME B1.1 with an accuracy of 2.5 µm, i.e. ca. 0.1 mil. Please print with low…
Strong multi-joint hinge. Uses M4 screws and nuts. Do not forget to pause the print and insert the nuts. The hinge has a support for a gas spring in order to hold a vertically opening door open and also to hold it closed. I personally use…
Distance roll four multi purpose, e.g. for PCB mounting. Print with any material and any layer thickness. Please report missing sizes, so I can add them. Please find the fitting screws here:…
This is a model of an Ukrainian Flamingo FP5 Cruise Missile. The geometry has been slightly adapted for supportless printing. You can choose from 2 printing options. Use the full model to print in 1 piece with supports. Use the 3-part…
Complete set of UNC heavy hex nuts. The bigger ones are based on ASME B18.2.2, while the smaller ones are based on ASME B18.6.3. All threads comply ANSI/ASME B1.1 with an accuracy of 2.5 µm, i.e. ca. 0.1 mil. Please print with low layer…
Simple toy drone model of an interceptor drone or speed drone. Provided as a) full model, that will need supports for printing or alternatively b) as a 3-part model for assembly. When printing the 3-part model, you need: 1 Square nut M4 1…
The ladder for our Nisse tended to slip on the floor and fall down. So I designed it a beautiful staircase so he can safely reach its door. The model is for easy, supportless printing.
Das Design ist optimiert für einen Druck mit einer Schichthöhe von 0.25 mm. Ich empfehle PLA. Die Türme werden angeschraubt. Das ermöglicht einen Druck der Türme mit anderer Farbe. Der Sockel kann mit einem Farbwechsel bei 5.2 mm gedruckt…
9V block battery dummy for desing and construction use
This flange can be used to connect a printer enclosure to an exhaust tube. I use a 32 mm pool hose. It is inexpensive, large enough, bends easily and has straight, unwaved parts, where it is easy to connect. Print with PETG. Print the…
Assemble your very user specific desk organizer like a puzzle. Extend it anytime you like. Hundreds of parts are waiting for you. I am looking forward to beautiful prints.
Designed for PETG. Should work with ASA as well. Print with 4 perimeters, 4 layers top and 4 layers bottom. The M4 screw must be inserted at least 10 mm to make a secure connection. Please report your experiences and wishes and help me…
Print it, insert a screw, put it into the IKEA SKADIS slit, and tighten the screw. The inner M3 thread of this part has been designed with precision and requires precision in print. I recommend printing with an SLA printer. For many…
Usual marking is red for right side and blue for left side. I recommend and have tested printing with color PETG.
These are all currently available results.
