Counting matching models…
This is a Linear tank for gundam seed, used by target practise by ZAFTs mobile suits until it was replaced by mobile suits towards the end of the bloody valentine war, but served on in second line units even into the 2nd valentine war as…
Gas cylinder in diffident sizes and scale meant for model railways or scale model dioramas. Category: Props
This is a 1/144 MAJ-V34 Jiachong a AFV from Human Reform League in Gundam 00. This is tiny, at 1/144 this is 51mm long, you will not print this at 1/144 on anything short of a dlp/sla printer. Test complete, all parts fit although handle…
This is a conversion for the HG M1 Astray into the space-based counterpart from Gundam seed MSV and Astray manga. The rifle does fit the normal hand, however, I have made my own with a wrist joint to help with holding. Category: Model…
This is a TS-MA2 Moebius from the show gundam seed. The grunt of gundam seed the TS-MA2 Moebius is prefect for getting shot down in droves when faced with something more dangers than a wet paper bag. This one is 1/144, yes they really are…
This is a detail set for the 1/144 M61A5 from the Zaku ground war set. With this you get a new turret bustle, 2 mg, smoke lunchers, recognition panels, and a mine plough.
This is a sword meant for 1/144 HG gundam kits. Category: Model Robots
This is a conversion kit for the 1/144 HG Guntank to turn it into a rx 75 Berrge Guntank an ARV version of the guntank seen in the intro to 8th MS team. Due to small parts, I recommend to only print with a DLP or SLA printer, as many…
stands for 1/144 gundam to fit action base one connector. in the factions of gundam seed. ZAFT and OMNI are done. Orb updated with connector parts, the others will work without glue but the Orb one dose need glue. Category: Model Robots
this is the 1/1700 scale drake class from gundam seed.
someone on FB asked for a broadsword for a gundam, so here it is, not tested but should work on SLA/DLP/MSLA printers. FDM will not work. Category: Model Robots
I should have stopped, but i didn't, now here is a 1/35 Jiachong from Gundam 00, this thing is massive and meant for FDM printers, if your crazy enough to make it on a resin printer there nothing stopping you, but it is rather large. the…
This is a rifle designed to fit gunpla models. Comes in 3 parts, barrel, main body and magazine. Designed for resin printer, may not work on FDM Category: Model Robots
a simple pokeball ornament, in 2 half's update 18/12/2017 changed tolerance on part 1 to make it easier to fit. great ball added 20/12/2017 masterball added 21/12/2017 ultraball added GEN 2 pokeballs…
this is a conversion for a m4a1 Sherman with cast hull into a Israeli ambutank. STL include a new turret now engine bay, rear bay, stowage boxes, and extra handles for when they inevitably brake off. WARRNING this conversion requires some…
this is a turret for a Canal Defence Light sherman made in cooperation with panzerserra (Marcos Serra) please check out his blog here http://panzerserra.blogspot.com This is for a italeri 1/35 M4A1, but please let me know the turret ring…
This is a stand for any mobile suit Cagalli piloted from gundam seed in 1/144, will fitting action base 1. WIP as note tested. original image from Janet Fin. Category: Model Robots
This is an adaptor for an airbrush to allow you to use a gundam marker similar to the "Gundam Marker Airbrush System". this is a WIP as more testing is required. if you use this please post photos of the resultant mess and suggestions…
This is a WIP, parts may not fit, I may change things and there are no instructions. That said this is the Spengler-class from Gundam Seed at 1/1700. Patreons will get the final version before I upload it here. update 04/10/2023 not…
This is a 1/144 heavy machine gun meant for high grade kits. The suit this was designed for was the 1/144 Leo, however it will work with most HG kits. This has all parts, pre supported files, instructions and fully assembled files in case…
This is an MK2 of my 1/1700 EDI-402 Laohu I made a few years back, I am doing this as I want to make a 1/400 ver of that model but when looking at my old model I realised how bad it was and it might not fit an MS at the right scale, so I…
This is a 1/285 tank made from the hull of the Starwave, and a modified linear tank hull. this is scaled to fit 6mm wargaming and can be used as a placeholder for Battletech. this model is designed for resin printing, and parts may not…
This is a conversion kit for the 1/144 Murasame to turn it into the 1/144 Ootsukigata, This mobile suit was nin only one publication with the above artwork, meant to be the replacement for the Murasame. update no longer WIP, part 4 right…
This is a 1/144 tank made from the hull of the Starwave, and a modified linear tank hull. this is scaled to fit 12mm wargaming or for gundam. Category: Vehicles
The Human Reform League mobile suit transport, EDI-40-11 Laohu, from Gundam 00. Scale to match ex line of Bandai kits 1/1700. this was done as a request by someone on shapeways, whistle i will upload things there with almost 0 mark-up,…
his is a bazooka from the DT-6800 Daughtress, scaled to be 1/144. Tested on FDM and resin printer.
The final ship in the main line warships for the Earth Alliance the Agamemnon-class. designed as a fleet carrier it normally is escorted by other warships also available to download. This model contained file for the standard…
this is a conversion set for 1/144 Murasame to turn it into the Murasame recon type, a poly cap PC N is required, now updated with final components, main change is positioning tabs on the braket and the removal of parts 3/4 as they were…
Drake-class 1/144 Silly grade from gundam seed. Yes, this is a warship from gundam seed at 1/144 to go with the normal gundam lines, no i am not making this at 1/100 or 1/60, the ship is over 1m as it is. The ship is broken down into a…
This is the final Jiachong variant, the engineering type. Has a roller and plough with new parts to fit. Requires parts from original Jiachong model
This is a re scaled Jiachong from gundam 00 to be 1/200, WIP as not tested, clearance might be an issue Print Settings Supports: No Category: Vehicles
This is a .30 cal MG for M5 Stuart world war toon tank. Category: Vehicles
I need to stop this, I scaled up the 1/144 linear gun tank and changed the clearances to allow it to fit together, also added a peg for the main gun as that thing is huge, on the 1/144 it will hold together with a little glue, but not on…
This is a set of M113 t-50 turrets for the Tamiya 1/35 M113. there are parts to make the Australian and New Zealand. Each turret needs 3 lifting eyes but make more, they tend to make good feeding for the carpet monster. the Australian…
this is a hippo name plate I made for a friends kid, i have uploaded the inventor files as I cant work SCAD so cant make this customisable, if I figure it out i will. in the mean time if you cant add the name give me a PM and i will send…
This is an original design based on the Fanfan from Gundam UC. A VTOL with cannons and rocket/missiles and originally designed at 1/144 to fit your Gundam dioramas. comes as a kit (instructions to follow), and a one-part model that will…
this is the refit for the Agamemnon-class. There is a strike dagger in some f the photos the is for reference and is not in the download. WIP as not tested, desinged for resin printing, not FDM, if you can get it to work, let me know.…
This is a rescaling of the 1/144 Archer from 1/144 to 1/285, with the model simplified to make it easier to print at this scale. Category: Vehicles
This is a base for gundam kits, this is the basic version relisted for free, the fully customize version is available though my esty store as a print shipped to you. brackets are designed to fit action base 2 fittings.…
A little 5 min progect to make a USB holder, needing tested so WIP. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.16 Infill: 25% Filament: Polymaker Polyflex TPU Black Category: Model…
This is the Light Space Carrier Stjarna Geisl, or in English rather an old Norce, Starbeam. this is a kitbash of my 1/10 or 1/20 buster rifle from Gundam wing, much like the Starship Mjolnir I made a few weeks back. Category: Vehicles
This is a 2 handed axe designed to fit newer high grades such as the Windam and the Daughtress. Designed for resin printer, comes in 3 parts. The video of my 1st version can be found here https://www.youtube.com/watch?v=gwOCjfpwl0Y…
This is a remaster of the old 1/1700 Drake i made a few years back with all new parts more inline with the 1/144 SG Drake.
This is a 1/100 scale chainsword for Gundams. its heavy enough that you will need to use fix pose hands, but duse have slots for slandered hands in the seed line. Was designed to be welded by Impulse and is 227mm long. all parts can be…
this is a 1/35 scale M4A3E8 Sherman seat for loader and tank commander made by request for someone on facebook. marked as WIP until its been fitted to a Sherman and conformed to be accurate. Print Settings Printer: cr-10 Rafts: Yes…
This is a set of t80e5 tracks for the M4A1 world war toon sherman. can be made on FDM or SLA. Category: Vehicles
This is some hard point weapons for the 1/144 HG Windam from gundam seed destiny. Category: Model Robots
This is a bazooka designed to work with HG 1/144 gundams. Category: Model Robots
This is a stand I made for the IPMS Gunpla & Mecha UK SIG. Comes in 1/144, 1/100 and 1/60. the 1/144 and 1/100 are compatible with action base arms. The 1/60 is so large you will need a cr-10 to print. the 1/144 comes in 2 parts to fit…
This is another remix of my buster rifle this time to turn it into a Fleet Carrier. this will be the last ship made from this remix as I will be doing something else for the smaller ships. Comes with a stand or a model without one.…
This is a reference file with scale drawings, and 3D models to help you make backpacks for the Windam. The files are not for replacement parts, they lack details of the original parts. This contains 2 PDF scale drawings, one of the…
This is a beam sabor and mags for the 1/144 Daughtress. They are meant to connect to the skirt armour. Category: Glasses
The Space Transport Mjolnir, or Fred to its crew, is part of the Malmori class made in the Arm system by one of their master shipwrights. Powered by 4 massive star hammer mk2 sub light engines capable of moving the ship up to 0.1C for its…
This is a 1/144 enclosed display base for gunpla. This was an simple idea I had but some part that I was hoping to do with it did not work out, so I will put it up here and come back and see if there's anything i can do with this later.…
This is a conversion for the world war toon M4A1 Sherman to turn it into a Lee tank CDL or to his friends Lee-san. This will be commercially available as will the regular Lee tank and the Grant. if you have the skill to make your own lee…
This model is for a 1/144 Windam giving it new side skirts and Mk315 "Stiletto" Rocket-Propelled Anti-Armor Penetrator, something missing from the original kit. The side skirts act as holders for the beam sabre and the Mk315 "Stiletto".…
this is some load out to fit to the hard points for the 1/144 murasame. this includes Fuel drop pod ECM pod 3 engine pods (SR-71 ramjet style, FA style, square) 12" speaker pods in case you want to go macross update Gun pod GBU Cluster…
This is the Comb, a shipping brake lock fitted to some Sherman. This part will only work on a resin printer, as it's only a few mm in size. LazerPig video https://youtu.be/TEXneyrHOyQ Category: Vehicles
this is a beam rifle made for gunpla HG. the front part has 2 positions, closed and open, thers only a few mm difftince but i was playing around. Category: Model Robots
This is a WIP. Will update it with full instructions and parts may not fit, will remove this once all checks have been done. This was made using the 1/144 Windam backpack reference, see link below. You can use the reference yourself to…
A scale model bunker i made years ago in 1/144. can be printed as one part (part 3) or as section with no supports (pillbox v4 and part 2) Category: Buildings & Structures
This is a scale down linear tank to go with the ship scale models Category: Vehicles
A random pillbox meant for gunpla. comes in 1/144 and 1/100. untested Category: Buildings & Structures
This is am ammo box I made about a year ago for sale on my ebay store, I have sold one and now I think its time to put it up for other to enjoy. works on FDM printers with supports.even made decals for it. Category: Buildings & Structures
This is a conversion for a M-10 Logan-san world war toon tank to turn it into an Achilles 17pdr found here ( https://www.ebay.co.uk/itm/233202931841 ) this includes a new barrel, muzzle brake, and counter weight. made on a SLA/MSLA/DLP,…
This is the flight booster for the 1/144 Sumo from Turn A Gundam. This is a WIP as it's being tested, will leave patch notes here if anything changes.
Tired of people steeling your milk? so am I. here my solution required a small padlock Category: Kitchen & Dining
These are all currently available results.
