Counting matching models…
Address change ;) https://learn.adafruit.com/adafruit-vl53l1x?view=all # SPDX-FileCopyrightText: 2022 wrdaigle for Adafruit Industries # SPDX-FileCopyrightText: 2022 Kattni Rembor for Adafruit Industries # # SPDX-License-Identifier: MIT…
This is a blank for size fitting.
This is a sizing blank
Yes that's slow-motion, I posted the full speed version in the makes section.
As this is still a work in progress there is no solid build procedure. I can confirm that the craft flies as designed; however, the tuning process on a balanced tailsitter is proving more involved than what I expected. Once I am confident…
This is a blank for sizing
This is a sizing blank.
A calibration object for tuning detail printers
A blank for design fitting.
A blank for design fitting. Original prop curvature was sourced from: https://grabcad.com/library/emax-avan-flow-props-1
This is a blank for fitting.
This is a blank for sizing.
This is a peristaltic dosing head with a reversal dampener. It uses a 9:1 gear ratio and a nema 14 drive motor. This is a part of a series of experiments I am performing on liquid/farm bot/bio related devices. Videos:…
Please see the informational files attached. UPDATE: Minor revisions to the GPS bracket and main chassis aft. NOTE: The printer profile is VERY important for this model. The main chassis should be roughly 19g on completion, this is…
This is a sizing blank
UPDATE: After doing some heavy testing I have discovered that the firmware build and params are lacking. I am in the process of creating a new build on a later version complete with lua scripts for indoor/outdoor operations. I will update…
The is one in my series of expandable wall-chain designs allowing for no-floor-space SBC clusters.
This is an alternative gimbal concept for my Sala drone concept.
Not much to say, I made this to keep my cables tidy...
I got tired of spilling my coffee...
Not much to say, Just cable guides that are large enough to actually run some cable through. UPDATE: I added covers to make the guides line up better. Much Wow! UPDATE: I revised the 20x40 cover so it grips better in place. UPDATE: I…
https://www.amazon.com/dp/B077R18VCG?psc=1&ref=ppx_yo2ov_dt_b_product_details Just something I am using for a project.
This is a sizing blank
https://github.com/manbehindthemadness/MavPi
This is an enclosure I made to protect my shop Pi and MangaScreen.
https://github.com/manbehindthemadness/MavPi
Fully mobile collapsing solar array complete with single axis tracker. NOTE: I am still in the process of writing up the build info. NOTE: The only specialized item in here is the tracker, and that's from SBESolar. FURTHER NOTE: Just…
This is an ongoing project, updates can be found here: https://github.com/manbehindthemadness/witness
A widescreen case for a RaspberryPi Zero
A cute little case for a RaspberryPi Zero
A simple but durable LCD mount for the popular WaveShare 7.5 touchscreen
This is a sizing blank. Note: I don't have this board on hand, so the size is based purely from the documentation.
This is a surface mount bracket to mount a WaveShare LCD over a TPLink smart switch
This is an Ardupilot/Beaglebone Blue based drone concept. I will begin testing as soon as I can identify a proper battery solution.
This is a converted allowing the RunCam Switch FPV system to use the interchangeable lenses that are sold for the ArduCam. Category: 3D Printing
Customized version of http://www.thingiverse.com/thing:1175301 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1175301 Instructions Using the following options: retain_dia = 3.5 cube_z = 72.2 cube_y = 33…
This little guy simply converts your Vapor2 unit into a pen like smoke machine. I built it to test airflow structure in my cooling fan assemblies. Build notes: → This thing is intentionally 1/10th of a mm too small, it needs to be air…
The is one in my series of expandable wall-chain designs allowing for no-floor-space SBC clusters.
This is a simple (but super nice) doodad that mounts a voltage converter at a 45 degree angle off of a linear V-Rail extrusion. I have included the step file as I am certain the mounting hole placement will vary from unit to unit.…
A visually appealing solution to 3D printer cable management
I wanted my headlamp centered and off the bars, that's about it. This one is stronger than the last.
A blank for design fitting.
An enclosure to mount a PiHole on pretty much any surface you feel like putting a screw into.
This is a sizing blank
This is a revised sizing blank as I was asked to include the battery cover sticker... enjoy.
This is a ducted cooling system. Name sums it up. It's designed to attach to a 20x40mm V-Rail. the fans are Sunon 40x40x28mm MagLev (GM1204PQV1-8A) https://www.amazon.com/gp/product/B00118ZWYY/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1…
As promised back when I threw together The Scorpion ( http://www.thingiverse.com/thing:1686696 ) I have come up with a full-featured carriage (and extras) package for the flex3drive dual (…
The is one in my series of expandable wall-chain designs allowing for no-floor-space SBC clusters.
This will allow for the placement of my H series extruders onto pretty much whatever you want. NOTE: I will have a hardware parts list out for this in a week or so. Category: 3D Printer Extruders
Aptly named fan mount :) Uses a regular 50mm cooling fan. Category: Electronics
Just a little hardening modification to my LCD enclosure, it's combined with an aft-hinge that can easily attach to anything with an M5 nut and bolt INSTRUCTIONS: Take any 7" WaveShare enclosure (examples linked below) simply drill the…
Description: This is a fairly universal carriage for projects using 20x40mm v-rail extrusions. It is a collection of slightly modified generic parts from "around", combined with large portions of my own design. I wanted to realize a…
This is a quick and dirty tool I built to get some thrust measurements off of my t-motors.
I highly advise refraining from catching this with your hands. https://imgur.com/a/ePNoVN2
This is a custom version of the Flex3Drive Lite ( https://flex3drive.com/ ) It has been modified to accommodate my modular latching system and a PTFE filament feed line. The hardware kit is available from the flex drive website. NOTE:…
These are all currently available results.
