Counting matching models…
This is a DJI Mavic inspired drone powered by a Pixhawk 4 flight controller. I have attached a parts list for my used components. Therefore, if you want to use different components these might not fit into the 3D model. With this setup…
Spice racks for 40mm spice jars like Hartkorn. You can use left and right 4 peice model to fill entire cabinet door or use single racks tho have a modular solution. You can also use Prusa Slicer to cut away the connectors to use the rack…
I designed this dock to use the Microsoft Surface Pro 9 as a second display. The plug of the Microsoft Dock 1. Generation fits inside the dock, so that the Surface will be charged and connected to the display
A small box to store your ruthex tips for threaded inserts. Use two pieces of 1,75mm filament as bolts for the hinges. It might be necessary to drill up the holes with a small drill bit after printing.
A simple 15cm try square designed with color change for easier readability Print instructions printed in PETG or PLA 0.2mm layer height detect thin walls enabled optional color change at 0.6mm layer height
Incremental Marking Gauge for 1-200mm with holes for 2,8mm graphite leads like Pica Dry Marker
I designed this case for the 7" Waveshare touch screen for use in my Smarthome system. The following parts are required to complete the display: 1 pc. Touch Screen ( Link ) 1 pc. Rapsberry Pi (see above link for supported types) 8 pcs. M3…
Headset support for Jabra Evolve 20 MS Stereo and control button Additionally required M4 nut and M4 screw (at least 20mm length). I used a DIN316 wing bolt
A simple holder to store the 6 Stabilo Woody pens and make them easy accessable for kids.
With this bracket you can install the printer display outside the Lack enclosure similar to the original Prusa Enclosure.
A simple wall hook for hanging your ironing board on the wall. The diameter of the leg of my board is 35mm.
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 For version with capacitor see this model .
A nice cookie cutter in the shape of the famous Holsten Gate (Holstentor) in Lübeck
ESC cover for 16MM Motor Mount for Multicopter TL68B19 TL68B20 with enough space for capacitor (e.g. Tarot AIR 20A). For version without capacitor see this model .
A 3 colored bookmark for your calender, pre-sliced with color changes at specific layers
a holder for the happybrush aus well as toothbrush head. add a M3x10 screw to make a mandrel for the toothbrush head add a M2x10 screw to attach the holder to a hole for shelves
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
I created this part for drying the finger gloves for my baby daughter. Yes, baby toothbrushes have a way different look Fits for most of the gloves like this one ( Link ) After use of the finger glove, simple pull it over the dryer and…
You can use either double-sided adhesive tape, Tesa Powerstrips, or screws to attach the base plate to the wall. The housing is then hooked onto the base plate and held in place with magnets (10mm diameter, 2mm height). Version for…
Simple customizable design to fix a mobile to a crib. Fits 10mm round bars that can be adjusted in length to fit your needs.
Coaster with several color changes over height to create a colored logo coaster. Diameter is 100mm. If other diameters are required, please let me know in the comments.
If you are building a children learning tower according to these instructions you are left with the Ikea BEKVÄM seat plate. I have recycled it to build a stool to allow my kid to reach the sink. The following parts are needed in addition…
These are all currently available results.
