Counting matching models…
Shuriken model Model is made of 2 identical parts (you can choose angled middle or normal), so make 2 instances and glue them together → that makes 1 shuriken IMPORTANT: ONLY TO BE USED AS AN ACCESSORY OR DISPLAY ITEM. NOT FOR THROWING AT…
Recommended fill: 15%-20% Recommended layer size: 0,1 mm for best quality (in the picture is 0,2mm) Recommended size of print: 6x6 cm 3rd place has 2 versions of the octagon rotation, you can choose yourself
It is a non-sharp toy replica of the baby karat T charm from CS2. Upgraded with separate keychain ring. Print both models (Knife, Keyring), keyring needs to be glued together with the knife Recommended layer height 0,1mm Do not change the…
No supports needed Should be dumm***proof Its actually working (mine was from PLA 8cm tall)
INSTRUCTIONS: YOU NEED A CERTAIN NUMBER OF EACH MODEL, IT HAS A NUMBER IN ITS NAME EG. 2X_Bonecharm_keychain_ring = PRINT 2 INSTANCES IF THE STL FILES DO NOT HAVE A FULL BRIM, SINK THEM A FEW mm UNDER THE PRINTBED ASSEMBLY. GLUE 2 PARTS…
Bency, IF IT WAS MORE BASED!!!!!!!!!
RECOMMENDED LAYER HEIGHT: 15mm !!! BOTTOM WING GUN HAS TO BE PRINTED 4 TIMES TO GET DESIRED RESULT !!! (for multicolor look as on picture you will need MMU or AMS, otherwise you can color it yourself or leave blank, it also looks good)…
Adds hexagonal finish to the thumb rest on the HyperX Pulsefire mouse body part. Best results with better details, 0.15mm layer height and less. If you print is as a whole, you do need supports. You can however arrange it as a flatbutt as…
Note that the dimensions of this screw are very tight, so if your printer is not very precise, then you will neet to increase the number of walls of the print and grind it down a bit later.
These are all currently available results.
