Counting matching models…
These are dinosaur themed bookmarks. Quick and easy to print requiring no supports and minimal infill. These were made from dinosaur Meeple models by Roberth Johansson (https://www.printables.com/social/221466-roberth-johansson/models)…
A nice Kraken pedestal for your Echo Dot 4. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Test it by asking your Alexa to “…
This is a bobble-head Gnome toy. This toy uses a 3D printed spring and base. Supports are required only for the Gnome body and you can use minimal infill for all parts (10% is fine). This was made from a couple of different things. First…
This is a remix of the excellent Gen #1 (R50, R52 & R53) Mini Cooper phone mount by weber395 (https://www.thingiverse.com/thing:4107581). I wanted a simpler version with a ball mount. fits same as the original, pretty much snaps into…
These are dinosaur themed refrigerator magnets. Quick and easy to print requiring no supports and minimal infill. Press an 8 x 3mm magnet into the recess in the dinosaur and it's ready (glue is optional, but recommended). These were made…
An Owl bookmark with google-eyes. No supports, minimal infill. Fast to print! Use self-adhesive 12mm google eyes to complete the model. Updated 1/20/23: added a model that uses 15mm google-eyes. Updated 4/16/23: added a supersized model…
A remix of the excellent Leonardo da Vinci perpetual motion wheel concept by RichMac (https://www.thingiverse.com/thing:44185). I remixed it to utilize a common 608z bearing and also some minor other dimensional changes. Enjoy! Print…
This is a bobble-head StarWars Tie Fighter toy. This toy uses a 3D printed spring that supports it and makes it bobble. An oversized base (with 8mm magnet recess) is used with this model to help keep it stable when it is not possible to…
This is a modular Cup Holder System for the early (89-97) Mazda MX5 (NA) Miata. The bracket attaches to the side of the console near the radio/heater panel (left, right or both sides) using the existing screw holes. You may need to source…
A nice mini version of my splattered Wiley Coyote refrigerator magnet uses a 5x2 or 6x2mm magnet (there are two versions). Super quick and easy to print requires no supports and minimal infill. Press a mini magnet into the recess (may…
This is a simple utility blade holder. I had issues printing blade holders and they never seem to fit a blade, or had clearance issues. I remixed the below referenced keychain knife model by loosening up the tolerances and then revising…
This is a bobble-head Brain toy that is based on an actual MRI brain scan, so it's “MADE WITH REAL BRAINS”. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 10mm magnet. The brain requires supports,…
This is a remix of the Scream Earrings 3D model. I made the hoodie and face into separate pieces that can be put together (glued). This eliminates the need to change filament mid-print and also means the front and back of the earrings can…
This is a bobble-head Skull toy with action bobbling brain. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you can use minimal infill (10% is fine). The brain bobbles best if you…
A work stand for working on 4-bbl carburetors with the narrower bolt pattern (4.25" x 5.625"). This fits a Carter Thermoquad (shown in pic) and I believe also the Rochester Quadrajet. This is based on the carburetor work stand print…
I was unable to find a Moai lighter holder online, or anywhere, so... This is an Easter Island Moai statue designed to hold a Bic lighter (standard size). This is based on the excellent Moai print designed by cerberus333.…
A nice Kraken pedestal for your Echo Dot 3. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Test it by asking your Alexa to “…
A nice claw-foot pedestal for your Echo Dot. Print as is for Echo Dot 4, or at 120% for the Echo Dot 3. Remixed from https://www.thingiverse.com/thing:1307300 Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
A nice tree stump pedestal for your Echo Dot 4. Prints nicely in PLA or use TPU for a nice flexible model that has some vibration dampening qualities. Requires no supports and you can use minimal infill. Remixed from:…
This is remixed from “6 Color Paint Pallet w/ 6 Brush Holders” by Herminator337. I added more material underneath to reduce the overhangs and i made the brush holders heftier and as separate parts. Requires no supports and minimal infill,…
A bookmark with a bespectacled chicken on top. No supports, minimal infill. Fast to print! Great for using up the end of a spool. Enjoy!
This is a bobble-head Star Wars Death Star model. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 8mm magnet. The Death Star is printed in 2 parts and they will need to be glued together. Supports…
This is a bobble-head wedding cake toy. This toy uses a 3D printed base and spring and there is a recess in the base that will hold a 10x3mm magnet. The base is oversized on this model to make it more stable and to allow use without a…
This is a flying saucer bobble head toy. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 10mm magnet. There are two halves to the saucer and you will need to glue them together. Supports are only…
Get your inner beatnik on with a set of finger bongo drums. No supports are required, but maximum infill is recommended for best tonal quality. Prints fast! Really groovy man!
This is a Star Wars Death Star Christmas ornament. The Death Star is printed in 2 parts and they will need to be glued together. There is a small hole in the bottom of each half so that you can use a short piece of filament to align the…
This is a Dr Who Tardis model that holds a tea light. Requires no supports and minimal infill. Enjoy!
A nice splattered Wiley Coyote refrigerator magnet (uses two 10 x 3mm magnets). Quick and easy to print requires no supports and minimal infill. Press a couple of 10 x 3mm magnets into the recesses (may need glue) and he's ready for…
This is a stencil for drawing rubber ducks. Finally an easy way to draw rubber ducks! No supports are needed and minimal infill is required. Enjoy
This is an Easter Island Moai statue designed to use as a decorative pedestal. Can be scaled up for even greater Moainess... This is based on the excellent Moai print designed by cerberus333, ( https://www.thingiverse.com/thing:1559944 ).…
A Mushroom door corner decoration. Prints fast with minimal infill and no supports required. Enjoy!
This is a sea turtle themed soap dish. Easy to print requiring no supports and minimal infill. This is made from kit-bashing the soap dish model by DPdesign https://www.printables.com/model/521945-soap-dish and the sea turtle model by…
An Alien bookmark with google-eyes. No supports, minimal infill. Fast to print! Use self-adhesive 15mm google eyes to complete the model. Enjoy!
This is a bobble-head Skull toy with bobbling brain action. This toy use a 3D printed spring that supports the brain and makes it bobble. There is a recess in the bottom that accepts an LED tea light. the brain and spring should be…
A tyrannosaurus dinosaur/Christmas door corner decoration. Because there's just not enough dinosaur in Christmas! Enjoy!
A brain on a stalk that looks really creepy when printed using Prusa organic supports. A raft is recommended, minimal infill is needed and it scales up nicely too… The brain model is based on an actual MRI brain scan, so it's “MADE WITH…
This is a bobble-head Snowman toy. This toy use a 3D printed spring that supports it and makes it bobble. There is a small hole in the snowmans face that will accept a short length of filament (1.75mm) for a nose. Supports are required…
A 51mm (2 inch) manual trans shift knob with a 3/8-16 thread. Looks and feels particularly nice if you print it using fuzzy surface mode in your slicer (as shown in the pic). No supports needed and 10% infill is fine, but more will add…
A stegosaurus dinosaur/Christmas door corner decoration. Because there's just not enough dinosaur in Christmas! Enjoy!
This is a bobble head (bobble-brain) Frankenstein Monster action figure. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you can use minimal infill (10% is fine). The brain…
These are bobble-head pumpkin toys in two sizes. These toys use a 3D printed base and spring and have a recess in the base that holds an 8 x 3mm magnet. The pumpkins require support, but minimal infill (10% to 20% is fine). This is based…
A 45 RPM record adapter with a creepy skull face on it. Enjoy!
This is a simple phone mount for the Ford Escape. Not exactly sure what all years this fits, mine is a 2011, so compare the pic to your car. I didn't want a high mount holder, or one that blocks a vent so i made this. It uses a screw to…
This is a cookie cutter (mould) that makes cookies shaped like the iconic Porsche Fuchs Wheels. Works better as a mould rather than a cookie cutter. Recommend dusting it with flour then pressing the dough into it for best results. You'll…
This is a bobble-head Lost in Space Jupiter 2 model. This toy uses a 3D printed base and spring and has a recess in the base that will hold a 8mm magnet. The base is larger than normal, again due to the size of the model. The Saucer is…
This is a bobble-head (bobble-brain) pumpkin-skull toy kinda thing. This toy use a 3D printed spring that supports the brain and makes it bobble. Lighted version looks particularly creepy if you print the spring and brains in clear…
This is a bobble-head turkey toy. It uses a 3D printed spring and a large base that accepts a 8x3mm magnet. Prints easily with no supports and minimal infill. Looks best if you change colors when printing. This was made from a couple of…
A Pumpkin manual transmission shift knob (3/8-16" thread). Great for Fall car shows! This is based on the pumpkin model by ArtieH (https://www.printables.com/model/242023-pumpkin). No supports needed and 10% infill is fine, but more will…
A bookmark with Nessy swimming on top. Requires no supports and minimal infill. Fast to print! Great for using up the end of a spool. Enjoy1
This is a bobble-head chicken toy. It uses a 3D printed spring and 10mm google eyes fit into it. The base is large and can hold a 10mm magnet (glue may be needed) . Prints easily with no supports and minimal infill. Looks best if you…
This is a Leaning Tower of Pisa bobble head toy. This toy uses a 3D printed base and spring and there is a recess in the base that will hold a 10mm magnet. The tower prints best upside down, supports are needed and you can use minimal…
This is a E3D Buggy model updated with a Back to the Future Delorean Time Machine. No supports are required and you can use minimal infill (10% is fine). This was made from a couple of different things. First is the Delorean polly model…
A handy wrench that fits the antenna on early Miata MX5. Keep it on your key ring and use it to remove the antenna before using a car wash, or installing a car cover. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No…
A small simple tool to use for aligning portable solar panels for optimal sun alignment. Not designed for any specific brand of solar panels and should work on most all brands.
Action Dwayne "The Rock" with Bobbling Brain This is a bobble-head Dwayne "The Rock" Johnson toy with action bobbling brain. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you…
This is a cookie cutter for fans of the Sanford Meridian Mustangs (Go Mustangs!). Also suitable for any other sports teams that have a “M” and a horse in their school logo. Enjoy!
I created a mirror copy, slimmed both of them down a little and glued the two sides together.
This is a case for the battery charge % gauge (golf cart, solar batteries, etc.) found under several brand names on Amazon. I wanted a case for it so it does not have to be panel mounted. See pics for dimensions and other information.…
This is a "stay strong" awareness message support ribbon that is suitable for various causes. You can hang them on things, or print a bunch of them and chain them together like “barrel-of-Monkeys”. Easy to print requiring no supports and…
A business card holder with google eyes, because everything is better with google eyes. It has recesses to hold two 20mm google eyes. Requires no supports and minimal infill. Enjoy!
This is a simple utility blade holder with a pocket to hold a 10x3mm magnet. I had issues printing blade holders and they never seem to fit a blade, or had clearance issues. I remixed the below referenced keychain knife model by loosening…
This is a plug you can print to replace your missing Miata windshield wiper arm bolt cover (they tend to get lost). Print in TPU for best results. You can also print a set in a custom color to match your car. Enjoy...
This is a Mini Cooper refrigerator magnet. It takes a 15mm (thin) magnet. Easy to print requiring no supports and minimal infill. Enjoy!
This is a tag for my dog Tater Tot. He likes it. This should be fairly easy to edit to change the dog name, or if you can't do that you could always rename your dog. Enjoy!
This is a valentine kung fu throwing star heart (with safety ring). Fun to print and throw around. Easy to print requiring no supports and minimal infill. Best printed in TPU for maximum fun. Make love not war...
This is a Mazda MX5 Miata toilet paper holder for your bathroom. You can print all the parts with minimal infill and supports are only recommended for under the Miata face part. This is made from the excellent Shaun the Toilet Sheep model…
This is a license plate light lens model I made for a 1953 Siata Roadster. I worked this up for a friends car, a 1953 Siata 208S Roadster. Additionally, this should fit some Cisitalia models and perhaps some Zagato cars. Original…
These are all currently available results.
