Counting matching models…
Simple M4 T-nut adapter for 2020 Aluminum Extrusions as I didn't find anything that fit what I needed on Thingiverse. I recommend printing with 100% infill and 5 side walls for strength since it's so small. Category: 3D Printer Parts
Needed a temporary case for my wife's new phone, so remixed this from the Iphone 13 case. The Iphone 14's camera is a little off from the 13's, so I made the camera hole a little bigger with Freecad and Meshmixer. Otherwise, same design…
I modified the original as it was too hard to print. I modified the model and fixed many of the imperfections and broken meshes. I also separated the wheels from the body as printing the whole thing with supports was proving a bit…
This is a GoPro mount for my 2019 Mazda Miata ND GT and also works for my Hyundai Kona. The circular clamp dimensions should fit exactly the rearview mirror with autodimming and homelink. It is angled to avoid the power connector behind…
My first try at making a simple necklace. :) I wasn't sure what to write.. so if you have something better to make it, let me know. :) Should be able to be printed on any printer that has decent bridging and can fit about a 200x200 mm…
I modified the original phone case for my Moto G Stylus 5G (2022) to be able to be printed with PLA and then just snap into place. The original design was great, but it wouldn't fit in the case without it being printed in TPU. This one is…
This is a hidden key holder to stick to some metal shelves in my garage. It uses a 10x3mm neodymium magnet from amazon. Category: Household
This is a simple bar to support the left side of the LCD panel since I didn't like how it was just floating. It also has holes to allow you to replace the M3 screws with longer screws if you want, but I found it actually snaps into place…
Remixed this to work with the Wyze Cam V3. The other remix for the V3 was a little higher than I like, so this should sit lower for the camera to be more level with the bed. Category: Camera
This is a small riser to put in the phone cubby so that a straight USB cable can be used without it trying to bend the cable.
This is an airplane phone holder to slot in the tray table and hold your phone fairly securely by tensioning the screws. All parts should be printed in the orientation of the model.. (especially the screws).
This is a modification to the Satsana fan duct (for printing with higher temps and all-metal heatbreaks). It has a larger air flow hole and is directed more towards the entire heatsink instead of just the fins. (Recommend to print with a…
This is a Satsana "inspired" design for the Ender-2 with the stock fan duct and CRTouch/BLTouch mount. (CRTouch/BLTouch is optional and doesn't need to be installed.) Designed to be printed without needing supports. This should allow for…
This is similar to the stock handle that comes with the Ender 2 Pro. The Z support hole is meant to be bigger than the Z rod so it does not restrict it's movement just like the stock support. I bought my printer used and it didn't come…
This is a holder for hex bits in a jar design. It was designed for bits that are about 5 cm in length. Also, I added a smaller jar for bits that are about 2.5 cm in length. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
This is another Wyze Cam mount for my V2 and V3 cameras to hook onto the Prusa MK3S printer I have. This should be an easier to print model.. printed on it's side. You can mirror it if you want in your slicer.
This is a bed handle for the Ender 2 Pro which also has an extension for a camera. It uses standard ¼" bolts and screws for the extension and tripod mount.
The Ender 2 Pro's microsd slot is ridiculously difficult to use, so this is a thing I created. :)
This is an update to my Ender 2 Pro mounts for Wyzecam and now also an SD Card extension. Now uses just a single printed screw in the front to push the attachments together to hold them into place and M3 screws on top for mounting the SD…
This is a simple holder for poop bags to be mounted to a wall or fence.
This is a wall mount to attach the VM5254 Baby Monitor to a wall using Wall Screws and one M4 Nut and Bolt. My second hand baby monitor didn't come with the mount.
This is a phone holder which uses cheap 1.26" neodymium magnets from Amazon . They are really only 1.1" so that is the dimensions of the cover for the magnet. It should fit perfectly snapping into the crevices of the Miata just under the…
This is a phone mount I designed for the Ender 2 Pro. It uses M3 nuts and bolts to attach firmly to the left side of the case and hooks onto the LCD panel for stability. All parts were designed to be printed without supports. The bolts in…
Since the Geeetech 3D Touch sensor has a more square body shape, it doesn't fit the same dimensions as the regular BL Touch and some other BL Touch clones. I believe it should fit some others that have the more square body. There's a…
The other design didn't seem to fit my holes quite right, so I remodelled this using a M10 coupler that I had laying around. Hopefully this helps others. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker…
This is a script to modify the G-Code to wipe the nozzle with the nozzle brush modifications for Ender 3 (or other similar printers). It allows you to set the wiping mechanism to be at specific intervals of layers. I didn't want to wipe…
This is an adapter to fit the original Yi 4K camera onto the DJI Osmo Mobile 4 magnetic mount. There is a threaded hole in the front because I was going to put a weight on it, but it turns out that I didn't need to as it worked without…
This is a design to help you figure out the correct probe offsets for your specific BLTouch / CRTouch mounts. The lines on the design should be 5mm apart, but it doesn't really matter because it's mostly just to be able to make sure you…
This is a mount I created to hold a cheap WEN Flexshaft Rotary Tool to try to do some engraving or other interesting projects. I have not yet finished my whole setup yet, so it is untested at the moment. All parts are designed to be…
This is a contraption to make it harder for someone to get to the battery latch. Obviously it's not a secure lock, but it should allow a little bit of protection in being able to slow anyone just wanting to take the battery off. This was…
This is a mount I created for my ND Miata that uses cheap Neodymium Magnets from Amazon and some Home Depot parts. The magnets I ordered say they are 1.26" in diameter, but in reality they are more like 1.1". They cost about $10 for 8 of…
This is a mount for a motion alarm for the Turboant X7 Pro, Slidgo X8, or Levy Plus electric scooters. The alarm can be easily bought from Amazon or Aliexpress for about $15. Here is one option to buy from Amazon :…
This is a stand to hold the SF2000 retro console in vertical mode for vertical games!
These are building blocks I designed for my child. They are designed to be printed in the orientation specified and should not need any supports or anything else as long as your printer can handle a 30 degree angle. Should click to stay…
This is a mount I created for my ebikes which don't have a regular handlebar grips. It uses cheap Amazon mirrors which can be found for about $5-10. This is the one I bought:…
Just a simple holder for my Hand Sanitizer to be next to the light switch. :) Should be easily printable in vertical orientation without any supports.. but probably best to use a brim.
I created this adapter to be able to reuse my X7 Pro batteries in my 36V ebikes which use XT60 connectors. This allows a lot of flexibility since so many other ebikes/scooters use this connector. (Blade connector only) All the parts are…
I created this bottle holder adapter to move the holder a little farther away from the frame and also angle it a little bit so it's easier to actually put a bottle in there. Also, added a hole for an Apple Airtag. :) Category: Sport &…
This is a holder for a wireless reverse camera mount that can be purchased from Amazon. It is meant to be used with Zip Ties to give extra security beyond the regular magnetic mount. This is the camera I used from Amazon:…
Simple sink linkage stopper. Print in the orientation shown in the picture to make sure stopper doesn't snap off. No supports Recommend 3 walls.
This is a bottle holder I designed to work with the angle on the Juiced Scorpion / Hyperscorpion. It also has a small cutout for an airtag to be stuck in the back of it. It is designed to be modular and I may make other cup holder designs…
Broken Connector Fix for PlayDough Hair Salon
This is a riser for the phone cubby to allow for straight usb cables.
These are all currently available results.
