Counting matching models…
Liquid heat exchanger I need to cool down a bunch of instruments and our laboratory has a primary cooling water circuit. Yet it is dirty and the pressure difference between the supply and return line is too low. In order to decouple my…
I have extended the lengths of the spool holder and the filament guide so it accommodates a 125 mm wide spool.
I have a deburring and chamfer tool from RIDGID SCANDINAVIA A/S (catalog number 34965R). I made a PETG holder that allows me to mount it and use it with a common drill. It is mounted on a M8 screw.
This is my remix of the Lattepanda 3 Delta case. I have added more space for the RP SMAs to fit more easily. I have also bought an IPEX 4/SMA conversion and additional high-gain Wi-Fi antennas .
Hey! This is my go with a remote-controlled train compatible with BRIO tracks. The original models come from MosaicManufacturing . I have used a very simple RC remote and a geared motor (68 RPM but I recommend going for the 137 RPM…
Holder for Nespresso Pro capsules, designed for wall mounting with a base. The main body attaches to the base using four 20×5×2 mm magnets. Enjoy! PS: My version has a little extrusion so it goes around the tiles. The uploaded files do…
A straightforward organizer designed for your 1/2" (12.7 mm) post holders from Thorlabs. The Posts3 file differs only in
Wallmount for the best shoehorn from IKEA.
Organizer for your 6mm rods from Thorlabs.
Small panel mount for 22 mm (OD) copper pipe or any other component. It is fixed with a zip tie.
Handy dark-field illuminator that fits Mitutoyo microscope objective. Can be adjusted for any other objective with a different WD. LED should be chosen so that it has a quite narrow emission angle for the dark-field illumination to work…
This small toy coin bank is a great way to entertain your toddler, even for a few minutes! The coin slot measures 52x8 mm, so be sure to use coins that fit comfortably. Smaller coins make it easier for them to hit the target, while larger…
Small pocket for laser safety goggles. I have printed it from transparent PETG so you can see whether the pocket is empty or not. Tested with all Thorlabs models - https://www.thorlabs.de/newgrouppage9.cfm?objectgroup_id=762.
This is an extremely simple optical beam shutter, driven by an Arduino Nano. It allows precise blocking of an optical beam (the servo can operate at up to 2 Hz). This device is ideal for optical chopping at very low frequencies or for…
In 1842, Samuel Earnshaw formulated what is now known as Earnshaw’s Theorem , which states that magnetic levitation cannot be achieved solely using stationary magnets. To maintain stable levitation, an external force must be introduced.…
These are a few stackable sample organizers for 5 ml Simport self-standing transport tubes T552-5ATTP. They are ideal for 10x10 mm samples, and the samples are held so that they cannot touch the sides of the transport tubes.
This box is designed for analog measurement of the current flowing from your Kepco BOP power source. By incorporating a shunt resistor (1 Ohm or 0.1 Ohm are recommended options), you can measure the voltage across it to determine the…
Sample organizer based on 0.5 ml Eppendorf vials ( Eppendorf™ DNA LoBind™ Tubes - https://www.fishersci.fi/shop/products/polypropylene-dna-lobind-polypropylene-microcentrifuge-tube/10686313 ). Ideal for 5x5x0.5 or 6x6x0.5 mm samples.…
The stackable sample organizer is meant for PELCO® Vial and Cap, 30mm L x 12mm O.D., 2ml (TedPella 21449). It is designed for 10x10x.5 mm samples, and the samples are held so they cannot touch the sides of the transport tubes.
A small centering collar for our sonic bath designed to center a 250 ml beaker (Duran, low-form). I have used PETG, yet some more advanced materials such as Nylon will do better against some solvents.
This is a small recorder I have made to record short messages for my child. Just turn it ON and hold the recording button for 2 seconds so that the recording LED indicator is activated. It is based on a Groove recorder and is powered by a…
Description: Tired of the "death hum" of an Aquael Pat Mini vibrating against your aquarium glass? This 3D-printed transition block allows you to mount the Pat Mini head onto an SF Bio Filter (S) body, giving you a dual-sponge mechanical…
These are all currently available results.
