Counting matching models…
To put your initials on the ball marker you will need to take into PrusaSlicer/a slicer or CAD and put your initials on it. This marker is 50mm by 3.25mm so that it can sit on the grass. To make it sit on the grass better you should print…
Infill=15% because it's just a decoration piece. Quality=0.20 doesn't matter but that's what I did it at. Supports=You don't need them. You May have to size the model down.
These pliers can help you either do small projects or hold items together temporarily. Also these grips fit comfortably in your hand. I would print these in 10% infill and with no supports.
I wanted to design a pic holder because all of my pics were all over my house. I wanted to keep them in one place. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 100 Infill: Any percent…
I designed a ukulele stand because the others that came up didn't fit in my house. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 100 Infill: 10% Filament: Tinmorry PLA…
Infill=15% Quality=0.20 doesn't matter that's what I did though. Supports=I would use supports under the ball. Paint them on if you have prusa slicer.
You can use this pumpkin for decoration around your house at halloween. I would use 5-10% infill. You do not need to use any supports.
After the differential of my Tamiya Hornet flung off multipule times i decided to design a part that would prevent futher dammage to the Hornet. We drilled two holes in the rear end of the chassis and lined it up before screwing two…
I decided to design a ball marker because I wanted to design a lot of things that are for golf because I love golf. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 100 Infill: 10 Filament:…
This is a cute bat that you can put around your house at halloween.
I designed this light because, once I flipped my hornet the light fell of. I am sure this has happened to allot of people. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: 100 Infill: 50% Filament: Tinmorry PLA Any…
These are bookmarks with happy, angry and wow faces on them. Just slot them in your book to keep your place.
Infill=15% Quality=0.20 doesn't matter support=no there a pain to remove
You will need 2 wings,2 bombs and 1 body. Recommended settings: Infill = 15% Quality = 0.20 Supports = None!
This has got a 0.5mm thick magnet hole and a diameter of 5.98mm. Recommended Infill=15% supports=A bit for the magnet hole. Quality=Doesn't matter.
This model can be printen with: 0%-5% Infill 1-2 walls NO SUPPORTS NEEDED
These are all currently available results.
