Counting matching models…
A small stand for displaying coins, personally wanted a way to display my silver bullion coins. Come's out lovely and allows me to display my coins in a great way. Layer: 0.18 Nozzle: 0.4 Infill: 15%
The original was to large for my printer (150mm x 150mm). Chucked it into tinekrcad and chopped it down to fit and can hold 10 cards. Looking for a larger storage check out the original this is remixed from. Box is compatible with PAMP…
CYD enclosure/case that can accommodate both USB C connection and Micro USB. Can also use a right-angled USB cable
Was a little shocked that Disney World did not sell a case/display for the medallions you can purchase at Disney Springs. Upon returning home I set out to design and create my own that's 3D printable. Include are the files to print a case…
Help place your seeds the correct width apart. Seed ruler will help. Category: Outdoor & Garden Print Settings Printer: Da Vinci Jr (hacked) Rafts: No Supports: No Resolution: 0.2 Infill: 20%
A lovely small dermal bit holder, with space for six (6) collet's. This is handy to have in any workspace, allowing you to organise your dremal bits. You got space for four lot's of sanding 'belts', six collets, four places for grinding…
A lovely small dermal bit holder, with space for six (6) collet's. This is handy to have in any workspace, allowing you to organise your dremal bits. You got space for four lot's of sanding 'belts', six collets, four places for grinding…
Received a new greenhouse via gumtree, my old design for a downpipe on that greenhouse was way to big for my new one. So created a new one and here it is. Included files are a 'plate' to print two endstops and a downpipe, then single…
A nice way to display your pins from Disney World. There's a small, medium, large versions. Plus two versions of the large with the 2nd one having space in the middle to mount a pin that has two mounting points on the single pin. The…
A simple Widger & Dibber tool for the allotment. Shall get a IRL picture of the print. Category: Outdoor & Garden Print Settings Printer: Da Vinci Jr Rafts: No Supports: No Resolution: 0.2 Infill: 20%
A nice easy way to store your 1oz 38.5mm bullion coins within coin capsules. This tube can hold up to 5 coins. The lid is friction fit and overall work's perfectly. If you would like a larger (i.e more coins) storage tube please message…
Lost 65mm of the bed on the left side. As I could not use the stock left wing's as it crahed into the X cover motor. Remixed it to one piece as I don't need the ability to change the height of the CR touch. With this new wing it's only…
Printable greenhouse gutter adapter to capture water via a standard hosepipe. There is a complete STL and two split STL's for both the down pipe and end plug parts. Hopefully this will be of use to some one. Just remember you need to…
Please ignore the WDW logo in the image. Did a test print to make sure the medallion hole size was correct before adding the DLP logo. Print on the end so you get a nicer finish on the front and you can either paint in the logo or even…
Customized version of https://www.thingiverse.com/thing:2280529 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=2280529 Instructions Using the following options: widthSquare = 150 wallThickness = 0.8…
Looking for a small parts tray/bin. This simply hooks into the greenhouse rail support. Not overlarge but large enough to store your bits and bobs within the greenhouse. Add more storage today. Print Settings Printer: Da Vinci Jr 1.0…
Added two holes to use M4 screws and t nuts.
Holder/display for the medallions you can get in Anaheim park
This is a remix as the original was too small width way's. So created this one. Category: Electronics Print Settings Printer: Da Vinci Jr (Hacked) Rafts: No Supports: No Resolution: 0.2 Infill: 20%
A selection of Herb signs for your allotment. When I grow and buy new herbs i'll design a new sign and upload it here. Mint sign comings soon. Print Settings Printer: XYZ Jr 1.0 Rafts: No Supports: No Resolution: ANY Post-Printing…
This is a remix of Filament Sample
Anemometer for a raspberry pi.Use either a Hall effect or Reed Switch hot glued to the side via the opening the body. Hot glue a neodymium magnet onto the threaded rod. Requires: 2 x 608z bearings 5 x M8 nuts 3 x washers Threaded Rod The…
Needed a 1x4 case top use while prototyping, so here it is. Print Settings Printer: Da Vinci Jr (hacked) Rafts: No Supports: No Resolution: 0.2 Infill: 20%
Small collection of Veg Signs. More will be added. Category: Outdoor & Garden
This is a remix of OT12345's 4x4 keypad case to fit a 4x5 keypad. Personally, find it useful to encase the membrane keypads in a case while I'm working on a project. Unsure to why there isn't one on here, so I've created one. :D May get…
Coming Soon! Bucket Capacity is 1.75mm Category: Outdoor & Garden Print Settings Printer: Da Vinci Jr Rafts: No Supports: No Resolution: 0.2 Infill: 20%
This is my first printable dedicated upload. All others have been transferred across from Thingiverse upon signing up here. I'm no CAD designer, just use Tinkercad and cut, paste, merge etc to get a design that fits my needs. Recently I…
My daVinci Jr 1.0 has been ‘hacked’. It run's a pi3 with ramps 1.4. One item I really wanted to move away from was the stock hotend. With the quick release being and Issue I'd set about to remix some other design to create this one. It's…
Loved the original model however needed a HEX pattern to match the rest of the BT skirt design.
Do love the Ender 3 PSU cover by @ckth_171757 . Recently I bought the BTT Relay V1.2 module and it gets its operating power from the mains voltage. Due to this, personally wasn't pleased having a high-voltage item within my main…
This 3D print utilizes the camera's original mounting hardware minus the bottom part with the screw thread. Build Guide Take out the long screw from the ‘clip’ of the webcam, as can be seen in IMAGE X. With that screw secure the Printed…
Created a end cap baffle for the daylight on a stick. As my voron 2.4 sit's next to me sometimes the LED shining through via the end is slightly annoying. You can see the difference in the image. This print is only the small baffle not…
I'd found an old web camera that I thought I'd repurpose for my 3D printer. It has a ball mount roughly 4mm wide. You can use a grub screw to hold the webcam balls in place. This holder is a remix from a raspberry pi camera holder. Print…
Some soft fruit signs. Category: Outdoor & Garden
These are all currently available results.
