Counting matching models…
spinning top with rack and pinion spinner like a beyblade kinda the more infill you use the longer it will spin snaps together with zero tolerance press fit mates. prints in 40 minutes at .20 speed pla settings
i used my very own meshy points to ai generate this Vizsla dog model and it worked great. then i uploaded it here because i dont want to hold this model hostage! other sites want like 15 bucks for a model no higher in detail than this. so…
a specific request i filled. a tiny 7 small tablet single day sliding door dispenser thing fits best .25" diameter tablets size of cylinder hole for each tablet = 0.375" dia x 0.207" tall i printed with a .4 nozzle, and at .15 Layer…
i tried to eliminate overhangs when doing this but there was just a couple that actually need it mostly under the lid. made in onshape before i learned about printed hinge solutions that are much better. i just might redesign this with…
it will fit right inside the top of that clear bin im planning on filling up with other knives.(see picture) thats why i made it this particular size. let cool before debedding to keep flat Super glue the joints. tape in place to dry. bin…
frog no supports pla reccomended post makes frog support free frog flex flexible frog looks kinda dead again but still nice look at those joints on that froj dead frogger floppy flexi flexy flexible puddle jumper ribbiter that doesnt eat…
Im getting better at designing hinges. these ones snap together (PETG) with a bit of part flexing and a careful pinch Dont mind the black and white situation going on with my print. mine printed great with supports just for the tiny hinge…
i made this box for the lid i had laying around. so i recreated the lid too so now i have box with lid. the lid fits in the box. and the box fits on the lid. they slide apart but only in one direction. i put 4 glass files in my box. the…
i came here looking for exactly this and didnt find it, so as per usual here it is. For either myself in the past, or anyone who already as a bunch of 8" long sideways boxes like i do. if you want it for bigger sleeves a scale up by a few…
the walls are 0.08 inches thick. keeps the cabinets org'd
Designed and tuned for use with PETG or alike. Stock settings all around. Very easy to print without supports. The screwdriver clips in, it wont fall out if mounted at any crazy angle. Clips right on the balance point thanks to the…
shower curtain hooks that lock shut. make sure on the slice that the open ends don't automatically bridge the open gap. i had to add a very thin negative part to the model so they wouldn't print attached. its a zero tolerance press fit to…
new sleeves trap and suck in air! squash the new out of your sleeves to have a nice flat deck that won't float away! wow or curved foil foils
I modeled this from scratch, working off screenshots. i also changed the words. traced the geometry, nothing too accurate. i suppose it was all more of a cad exercise. see my inspiration at yeti dot com
i took my other model and stretched the legs out in blender. it was kinda tricky but I'm really liking how it turned out. I did Classic rectilinear supports with a 80 degree overhang threshold to keep the legs from flexing too much.
yuur cat can probably tip it over so i have it fasted to the window with a clip that fits around the bottle new and improved. now easier to clean! WOW this simplified design prints faster by not having super thick walls. mostly drawn for…
its pretty fun to stack them into each other so its all closed. or to stack them into a tall tower or just print them all and conclude its not that fun. the choice is yours. i did it more for the cad but here it is separate the bodies and…
model rocket nose cone imports at .893" (22.68mm) ID .925" (23.49mm)OD funny options like cat head finger poop small rocket fish head
This fits mine, it might fit yours too. look at the dimentions. i simply force-twisted it onto the bolt threads. looks much better
"Valence" is a chemistry term that describes an element's capacity to form chemical bonds. "Valance" is a decorative trim piece. for 2 inch wide valance, with 13/16" standoff. 3d printable model to print these hold the cover trim piece…
i used pla. obviously no supports
Grid fins for a model rocket direct stl import is 100 mm id so a .50 scale is 50 mm id wall thickness optimal scale: 22.68 mm ID gives .033" walls for .20/.4
this provides marr free clamping faces your tape measure tab to perform corrective blows or prys print heavy (about 80% infill) depends on your clamping solution after its clamped, gently hammer or pry the tab the desired direction. if…
squeeze to unlock. designed with petg but i bet pla will work too walls are .050" thick. The inside compartment is 3.625" tall x 2.75" wide x 2.75" long 92mm x 70mm x 70mm
These are all currently available results.
