Counting matching models…
Elegant paper rol holder. Printed in PLA CF from Bambulab. Layer height 0.2mm, 3 walls and 15% infill. Printed without support, but it depends on how well your printer can handle the overhangs. Requires some post processing.
Container set for Ikea Skadis. Many different configurations possible. 6 sizes containers, 3 heights to choose from. No support needed. One holder can hold up to 6 trays/containers depending on their size. Storing and rearranging as you…
Adjustable router template. Easy to print, but it takes some time. If the size(limited by the print height of the X1C) is not enough you can print additional profiles and extend the length or width. To put it together you will need heated…
Printable pan flute. It sounds ok but I’m not en expert ;) Printed with PLA, layer height 0,2 or less(Upside down on the build plate. 2 perimeters, infill 15%, use support only for the mouthpieces and bridging for the end of the pipes).…
Top for EVA 3 MGN12H instead MGN12C. For sensorless homing.
Set of chips with tray for poker or casino. Included 3mf file for bambulab x1.
Printed with Fiberlogy PCTG and Silk PLA from Amazon. You may need support for the main part. Depending on your printer. Use adaptive layers for best result(main part) 0.2 layer height.
Now you can drill straight without problems. With this jig you can make perfect 90 degrees holes with 5, 6, 8 and 10mm drill. Just use replaceable bushing to fit the drill. The jig also allow to make holes on the edge (45 degrees) and in…
Remote cooling system for EVA 3. Takes a lot less space behind the printhead. Some parts need support. Designed for 3mm back plate. You'll need radial blower 120x120x32, CPAP flexible tube 22mm and few tie wraps
Easy to print, but requires some support. Fortunatly is not difficult to remove it. 2 walls and 10-15% infill should do.
Easy to print paper roll holder/dispenser. Use fuzzy skin for extra design look. Printed in black ASA layer height 0.2mm, 3 walls and 15% grid infill.
This is the remix of the allen key handles by OlleMark. His handles are very well design but for my “little” hands I've found them a bit small. And for that reason I always buy screwdrivers and other tools with thicker handles. In this…
Round box with two levels for fishing accessories. Printed mine with PLA but I would advise to use PET-G or ASA/ABS. 3 walls, 15% infill, 5 bottom and top layers.
Mount for 7530 fan for EVA 3 You will need 2 M4 heated inserts for the bracket. Airduct must be printed with support. Work in progress, may need some tweaks.
Handy when your busy with house remodeling. Handheld paint and paintbrush holder. Can also be used with small roller (10cm). Be sure to print it with enough walls to make it liquideproof. For paints based on solvants must be printed with…
Simple and fast to print Smiley keychain tag. Print it in different colours for everyone in the family. Layer height 0.2
Simple keychain with tire profile depth gauge. Printed with 0.3 nozzle and 0,1 layer hight, no support. Use “print thin walls” in Cura. When ready printing slide the slider part in to the keychain. Use glue to fix the button in place.…
Because I didn't like the original shrouds from EVA 3 (they are all to big and to chunky for what I like) I made my own. I made it from scratch so i guess it doesn't count for remix. But it was inspired by the EVA 3 shrouds. I wanted it…
Place card holder and napkin ring. No support. Great for the wedding table.
Support for plant. Easy to print and modular. Allows to add extra length when the plant grows. Print settings: Material PETG (but can be printed with others). Layer height 0.2, 6 perimeters and infill 25%.
Two trees about to kiss each other. Romantic 3 pices wall art. Easy print. Totally around 100 gram PLA. Layer 0.28, 2 walls 15% infill.
Box for keeping the spiral chess pieces of big bad bison: https://www.thingiverse.com/thing:470700
Knife holder for 5 knives in the shape of X-wing. Easy to print without support.
Napkin ring for the wedding. Easy print, no support.
Filament sensor mount for Artillery Genius. Remix of: https://www.thingiverse.com/thing:4577785 Printed with Giantarm PETG blue(aviable on Amazon). This fillament coresponds nice with original blue colour of artillery genius. Printed with…
Playboy coaster. Printed in black and orange ASA(it supposed to be black and pink, but didn’t have pink filament). Layer hight 0.2 infill 50%. Change colour at layer 13 and again at layer 15. For better results you may want to use ironing.
Yet, another linear rails conversion for Hevo. What is different here? I've used 20x20mm carbon fiber tube for X axis. It makes it +/- 200 gramms lighter then when used with 2020 aluminium extrusion. It can be slimmed down further if you…
Ikea koppla power strip bracket for Lack table leg. (will also fit other 50mm2 table legs). Easy to print, no support. Remixed from: https://www.thingiverse.com/thing:1376701
Wedding napkin ring V2. Easy print without support.
Mount for XG hotend from Dropeffect. No support. Leyer 0.2 Extra: 4 M3 heat set inserts, 4 M3 10mm cilinder head screws to replace original m3 sinkhead screws delivered with hotend.
Trianglelab Dragon mount for Artillery Genius with stock extruder. You'll need 6 M3 heated inserts for 4040 fan mount. And few M3 nuts for Waggster mod fan duct. Print all parts in well heat resistant filament. Use piece of PTFE tube…
Big adjustable setsquare. Additional materials: Heated inserts M3 5mm 6 pcs. M3 screw countersink 6mm 4 pcs M3 screw countersink 8mm 2 pcs (for scale/dial marker) M3x20 bolt (hex head) M3 nut for the thumbscrew (add a pause to g-code to…
I wanted to use Sherpa mini and Trianglelab Dragon on my Hypercube evolution. But i coudn't find the mount for it. So I've decided to give it a try and make my own. The mount plate for sherpa/dragon has no space for end stops, if you want…
I'm using 42x42 cm heated bed for my Hypercube evolution. Because of the large size the aluminium bed plate get warped badly due to heating and cooling . Aspecially when printed ASA, ABS, Nylon (100 degrees or more). Original brackets…
Remix of great design of Damiken: https://www.thingiverse.com/thing:2937232 I've changed the hex nut for threaded knurled insert (M3x8x5). I have also adjusted the hole diameter. Print Settings Printer: Artillery Genius Rafts: No…
Designed to protect the back side of Ikelite strobe during transportation and storage. Print Settings Printer: Artillery Genius Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Extrudr ASA Black Category: Hobby
Are you like me working in construction? Or maybe you are a handyman? Or a skilled hobbyist? Well, then I've got something for you. Brand new inlay/organizer for 50x47 shims/spacers. They are very common size (at least in the…
These are all currently available results.
