Counting matching models…
Set of sprockets or gears for the chain listed below. Each pair is a set screw locking hub and a idler style. 10, 15, 20 and 30 tooth to get many ratio options. https://www.thingiverse.com/thing:3313211 fischertechnik compatible…
Vintage radio knobs. 3/4" - 1" - 1-1/2" - 2" 1/4" shaft and set screw holes ready to tap 8-32. Print Settings Printer Brand: Creality Printer: Ender 3 Resolution: .16 Infill: 50% Filament: Hatchbox PLA Black Notes: Print 0.16 or better…
Custom Capsela crane hook. Made in 123d Design and posted with crane winch in Tinkercad. https://www.tinkercad.com/things/cNmHgFsCggu Category: Construction Toys
10-6-21 Added remix credit to Slangfil since his design is similar and earlier dated. Unintentional remiss on my part. 9-22-21 Added a smoothed version for little hands. Kids pretend binoculars using toilet paper rolls. 42mm diameter…
This remix has the spring retainers removed and CA glue is used to assemble. I could not get the ends to print well so removed them. Fitment of the cross pieces will need some sanding and cutter work. The ends should press into the side…
Helical gears to use with the Erector Construction Set. These are designed to work with the 1" hole spacing. Gears will mesh at 90 deg and 180 deg depending which gears are used together. The set screw is ready to be tapped 6-32 thread…
Remixed of phone magnifier. My LG phone is larger so required scaling up and modifying the hinge. Also reduced the size of the legs. Modified in Tinkercad. https://www.tinkercad.com/things/aCW8LGxw957 Print Settings Printer Brand:…
Commutator wheel and insulator pieces. Used to connect electrically a rotating part of the Erector project. Can be used to transfer power to lighting or motors. The round aluminum disc is made with a hole saw. Fahnestock clips are used as…
Eyepiece eye relief shield 29.4mm ID x 44.5mm long for Bausch & Lomb. Made in Tinkercad https://www.tinkercad.com/things/jqEopgpLtE5 This is a remix. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
Eyepiece cover for Bausch & Lomb microscope. 30mm ID X 39mm long Made in Tinkercad https://www.tinkercad.com/things/7hF3rnH96Gg Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 25%…
Crane wheel or pulley for the crane arm. Made in Tinker Cad and 123D Design. https://www.tinkercad.com/things/6TnwE68WuVC I used these settings to print 0.12 layer 5 tops and bottoms 3 walls 40% infill Brim set to .4mm distance Print…
Capsela hand crank. Made in Tinkercad https://www.tinkercad.com/things/aaZcIl59XUO Update 08-19-21: Changed the handle to print as one piece. Update 08-20-21: Added a cap for the crank handle to retain a bar end. Print Settings Printer…
This is modeled after the classic Gilbert Erector Screw driver. Use with 1/4" hex bit. Made in Tinkercad https://www.tinkercad.com/things/35i6V4v9xGN Category: Construction Toys
Capsela crane arm replacement. Made in Tinkercad https://www.tinkercad.com/things/7COec92PUbS Category: Construction Toys
This gear set is to have a 1:1 right angle capsule. 20 tooth gears are used. Made in Tinkercad and 123D Design. 123D Design produces fillets for the support and rod ends. https://www.tinkercad.com/things/bV7OmQvutqU…
Eyepiece storage for 23mm x 56mm - 5x and 23mm x 36mm - 10X Bausch & Lomb. Made in Tinkercad https://www.tinkercad.com/things/gS3pKEsdYkw Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
Wheel for the Robotix construction set. Made in Tinkercad https://www.tinkercad.com/things/8j2PWDEVKh3 Category: Construction Toys
Capsela crane base. Made in Tinkercad https://www.tinkercad.com/things/ap7HeXSVKgm Light adjusting with a knife and 5mm drill may be needed for best fitment. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Motor mount for Erector Set motor with broken tabs. Glue motor to mount. Made in Tinkercad https://www.tinkercad.com/things/cuD5E99QXe9 Category: Construction Toys
Axle shaft can replace the capsule in your model. Can also be used as a base riser or legs. Made in Tinkercad https://www.tinkercad.com/things/84hotnrbPnD I used anti warping tabs in the slicer to hold down the small starting points. Hole…
Capsela Pivot post to give motion to the bars from the hand crank. Can also be used as legs. Made in Tinkercad https://www.tinkercad.com/things/gjINztgM2Nr Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes…
Capsela to Gilbert Erector Set mounting adapters. Can also be used to mount capsules to any surface. Made with Tinkercad https://www.tinkercad.com/things/4KW5UacOrcS Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
These are all currently available results.
