Counting matching models…
Could not find a model for 2020 extrusion slot cover so designed it. Optimized for 0.4 mm nozzle Base layer height 0.2 mm “Wings” to be printed with lower layer height to aid strength (0.7 mm and up set to 0.1 mm) 20 cm length to fit on…
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
Reverse engineering of Aliexpress V6 Hotend Mount. Link if you're looking for it: https://www.aliexpress.com/item/1005001948422958.html?spm=a2g0o
Model based on what's mounted on my SP-3. Might help visualize changes / design new hotend setup. Included both mesh and F360 project file.
Design based on real measurements + TriangleLab drawings. Might be helpful for designing hotend assembly for your printer if you intend to use one.
Model based on what's mounted on my SP-3. Will be probably further used to model whole printer. Included both mesh and F360 project file.
Model based on what's mounted on my SP-3. Will be probably further used to model whole printer. Included both mesh and F360 project file.
Under desk mount for UGREEN CM662 KVM and remote. Each model has two holes for 4mm screw. Prints with no supports.
Simple grip to go on OM-D E-M10 Mk.II. Use double-sided tape to stick it on. Two versions available: Non-textured Textured Used bumpmesh.com to apply texture effect. Settings: Displacement Map: Voronoi Scale U: 0.4 Smooth mask: 1 Bottom…
Mount for Dell WD19 docking station. When printing, ensure to print base + 2 knobs :)
Bracket for HP TPN-DA03 150w power brick / power supply. Designed to be mounted vertically on 2020 extrusion. Includes holes for velcro to keep cables tidy. Prints without supports.
System for creating cable paths with 40mm flex conduit. All parts print without support. Boxes I have used are f-tronic NEPTUN NFK18 but any boxes with 32mm holes should work. Parts include: Adapters Straight Has flange to sit conduit…
Bracket designed to allow for mounting of 5015 fan and 8mm inductive probe to NF-Wind (or clone of thereof) extruder. Mounting height is optimised for use with TriangleLab CHC Pro. 5015 fan to be mounted via 3mm screws with heat-set…
Handle for Olfa PB-450 blade. Designed as temporary solution but works so well that now I do not intend to buy original handle :D Requires: 1x M3 insert 1x M3 10mm screw 2x 2.5mm 8-10mm self-tapping screws
Snap-fit cap to cover hole in Lanberg Open Rack leg (OR01 series).
These are all currently available results.
