P
PrintablesAdamantium 3D
Cymbal Sleeve
I printed mine in PLA+. Probably better off in PETG, nylon or ABS but 🤷
- Downloads
- 614
- Likes
- 59
- Rating
- 5
All models
Counting matching models…
P
PrintablesAdamantium 3D
Artillery Sidewinder Filament Spool Holder
Uses all stock hardware. Prints in place with the tube vertical. You'll kind of have to tip it sideways for it to snap onto the extrusion when installing.
- Downloads
- 128
- Likes
- 5
- Rating
- 0
P
PrintablesAdamantium 3D
Out Front Mount Adapter for Quad Lock Stem Mount
I didn't want to buy another mount since I already had the stem mount, but my stem was too short and handlebar didn't have enough real estate to mount it there. I used the dimensions they give on their website for the Out Front Pro mount…
- Downloads
- 118
- Likes
- 28
- Rating
- 5
P
PrintablesAdamantium 3D
Hub Centric Ring 56.1mm to 73mm
Print at 100% infill. At the end of the day if you properly tighten the nuts on a wheel in a star-shape it should self-center anyway, but these can help get you started.
- Downloads
- 111
- Likes
- 4
- Rating
- 0
P
PrintablesAdamantium 3D
Cotton Carrier Flat Hub
These parts have not been tested yet. These are 1:1 models of a Cotton Flat Hub. Print the pad in TPU or the like.
- Downloads
- 70
- Likes
- 11
- Rating
- 0
P
PrintablesAdamantium 3D
Stand for Rabid1972's Star-Lord Quad Blasters
Simple stand for Rabid1972's awesome blasters.
- Downloads
- 57
- Likes
- 9
- Rating
- 0
P
PrintablesAdamantium 3D
Allen Key Hanger for Tray for Parktool
After printing the tray by Stucki I realized I wanted somewhere to hang my allen keys vs. setting them inside the tray. This simply clips onto the edge of that tray. Print upside down, no supports needed.
- Downloads
- 50
- Likes
- 14
- Rating
- 5
P
PrintablesAdamantium 3D
Push Pin Fridge Magnet
This uses 12x2mm rare earth magnets. I printed it at 0.1mm layer height, 25% infill with 1mm wall. No supports necessary.
- Downloads
- 41
- Likes
- 3
- Rating
- 0
P
PrintablesAdamantium 3D
Bike Braze-on Plug TPU
Simple plug intended to be printed with TPU. Remember to scale up about 3.5% when printing with TPU for accurate sizing.
- Downloads
- 38
- Likes
- 13
- Rating
- 0
P
PrintablesAdamantium 3D
Filament Runout Sensor Mount for Artillery Sidewinder X1
Fairly straightforward design that uses the original fasteners. I printed it with the truss facing the bed at 100% infill.
- Downloads
- 29
- Likes
- 3
- Rating
- 0
P
PrintablesAdamantium 3D
Hurst T-Handle Shifter
There's four different options depending on your vehicle: M10 x 1.25 M10 x 1.50 M12 x 1.25 M12 x 1.50
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesAdamantium 3D
Subaru Cross Bar Spacer
I bought a used set of cross bars (p/n E361SFG402) and this was missing. Maybe it'll help someone else out too
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesAdamantium 3D
Shofar Stand
I basically remodeled it with smooth radii and added lots of fillets.
- Downloads
- 15
- Likes
- 1
- Rating
- 0
P
PrintablesAdamantium 3D
Door Casing 2-1/4" Wide
Drop in slicer, scale to correct length(s) in Z-axis. Nail, caulk, paint!
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesAdamantium 3D
Voile Strap Ski Rack Roof Mount
I modified the original design to fit OEM 2010 Impreza cross bars with a dimension of 29mm x 64mm. This change also completely uses voile straps for securing the mount to the crossbar (instead of bolt/nut) and then another one for mount…
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesAdamantium 3D
Simple GameSir X3 Pro Stand
Just a stand to prop up your controller.
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesAdamantium 3D
Tuya Robot Vacuum Filter Frame
Did you toss out the filter frame with the filter? Yeah... me either. This one can replace it.
- Downloads
- 4
- Likes
- 0
- Rating
- 0
These are all currently available results.