P
PrintablesKartan
9mm Luger Parabellum Training Snap Caps
Dummy rounds to turn empty casings into Snap Caps. Push 3d print into the case /tight fit), and check the overall length is under 30mm.
- Downloads
- 307
- Likes
- 43
- Rating
- 5
All models
Counting matching models…
P
PrintablesKartan
Fan Upgrade Polymaker Polydryer
Adapter for noctua NF-A4x10 24V replacement fan to quiet down the polydryer. Uses screws that come with the noctua fan, prints with no supports. => the part only interacts with the “cold” side of the heater, still recommend heat resistant…
- Downloads
- 303
- Likes
- 147
- Rating
- 4.89
P
PrintablesKartan
Angled Display and Faceplate Polymaker Polydryer
Angled Display for the Polymaker Polydryer to increase readability. Splicing of the brown cable by +-20mm was necessary. Faceplate can be found here: https://www.printables.com/model/1170811-faceplate-polymaker-polydryer Perfect time to…
- Downloads
- 150
- Likes
- 60
- Rating
- 5
P
PrintablesKartan
Faceplate Polymaker Polydryer
Replacement faceplate for the Polymaker Polydryer. Prints with no supports - recommend heat resistant material - use petg-cf myself with no problem.
- Downloads
- 148
- Likes
- 55
- Rating
- 5
P
PrintablesKartan
Bambu Spool Desiccant Silica Weighted Insert
Model adds weight to reusable bamboo spools, for use in the ams, without interfering with the quick loading of refills and staying flush with the outside. This version is intended to use Silica. No supports needed, printed with pla and…
- Downloads
- 91
- Likes
- 22
- Rating
- 5
P
PrintablesKartan
item 20x20 endplate bumper screwed
screwed endplate for item 20x20 additionally secured with m5 countersunk machine screw still allows access for standard connectors
- Downloads
- 87
- Likes
- 16
- Rating
- 0
P
PrintablesKartan
Bambu Labs ams buffer release exit button PTFE
Button to release the PTFE tube on the ams hub. Prints with no supports - tested in petg and pla.
- Downloads
- 57
- Likes
- 8
- Rating
- 5
P
PrintablesKartan
supportless Safariland QLS compatible Fork
Safariland QLS compatible Fork / prints without support
- Downloads
- 51
- Likes
- 9
- Rating
- 5
P
PrintablesKartan
secure PTFE ams feeder funnel saver M10 M8 M6 M5
The ams saver camps over the entire feed assembly, so it cannot come loose while rewinding. Made fore use with m10 ptfe fittings - M8-M5 ID models additionally uploaded for alternative hardware Prints with no supports, tested in pla and…
- Downloads
- 47
- Likes
- 2
- Rating
- 0
P
PrintablesKartan
fidlock V-BUCKLE holder
fidlock V-BUCKLE wallmount - hold optional 15x8mm magnet
- Downloads
- 41
- Likes
- 7
- Rating
- 0
P
PrintablesKartan
Grand Power STRIBOG backcap mp5k stock adapter
Stock adapter for Grand Power STRIBOG, mounting a mp5k(B&T) stock - slightly shorter as original. 2 holes allow m4 inserts for grub screws, if wobble occurs over time. Suggest petg.Stock adapter for Grand Power STRIBOG,
- Downloads
- 41
- Likes
- 2
- Rating
- 0
P
PrintablesKartan
Bit Holder Item 40x40 8
Bit holder with optional name tags for use with item 40x40 profiles. prints in place.
- Downloads
- 33
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Flexi Giant Dog Leash Wall Mount Hook
Flexi Giant Dog Leash Wall Mount Hook fits Flexi Giant in S/M and L - mounts with wood screws from the back or heated inserts. Prints with no supports, tested in pla and petg.
- Downloads
- 31
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Grand Power STRIBOG 5,5'' Handguard
Extension handguard for the short grandpower stribog 5,5'' models. Frontsight needs to be removed / reuse pin. optional mount for pressurepad using a 2magpul m-lock tape switch mount plate" + 2x self tapping screw m4 recommend petg /…
- Downloads
- 30
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
gardena overpressure tesla nozzle
nozzle for gardena system, with tesla valve to stop overpressure / pressure fluctuations from the waterpipe.
- Downloads
- 25
- Likes
- 4
- Rating
- 0
P
PrintablesKartan
Molle Panel Custom Tiles configurable
Molle tiles, that can be configured to make a custom mollepannel.
- Downloads
- 25
- Likes
- 8
- Rating
- 0
P
PrintablesKartan
sewing button elongated two hole
sewing button - elongated with two holes / 30mm
- Downloads
- 22
- Likes
- 4
- Rating
- 5
P
PrintablesKartan
item 20x20 centering peg
item 20x20 centering peg for laying profiles ontop of each other. Fits tightly, but can be fixed with M4 grubscrews.
- Downloads
- 20
- Likes
- 4
- Rating
- 0
P
PrintablesKartan
Bambu Labs Poop Shoot Front Plug
Model covers the gap in front of the Poop Shoot on Bambu P1p/s and X1 Printers. Prints with no support - tested in petg and pla.
- Downloads
- 19
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Bambu Reusable Spool Weighted Insert With Screws
Model adds weight to reusable bamboo spools, for use in the ams, without interfering with the quick loading of refills and staying flush with the outside. This version uses 6x screws + nuts as weights: m8 x55 din9784 or m8 x55 din912 + m8…
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesKartan
Bambu Reusable Spool Weighted Insert Solid Geometry
Model adds weight to reusable bamboo spools, for use in the ams, without interfering with the quick loading of refills and staying flush with the outside. This version uses an empty geometry to hold concrete for example. No supports…
- Downloads
- 17
- Likes
- 2
- Rating
- 0
P
PrintablesKartan
Mantis non AR15 spec receiver set
Holder for Mantis Blackbeard laser, without needing - nor being compatible to an mil spec ar receiver / barrel extension / bolt / carrier. Fits only milspec triggers, grips, stocks and handguards. Print lower tilted 30°, buffer tube at…
- Downloads
- 17
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Tool Holder Item 40x40 8
Toole holder with optional name tags (https://www.printables.com/model/1205962-bit-holder-item-40x40-8) for use with item 40x40 profiles. prints in place, models with different sizes included.
- Downloads
- 16
- Likes
- 1
- Rating
- 0
P
PrintablesKartan
dive spool reel
Spool for diving. no supports print with 100% infill pin the 2 halfs together with 4 strips of fillament (min 28mm)
- Downloads
- 15
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Isolation Enclosure Polymaker Polydryer
Isolation Enclosure for Polymaker Polydryer A shell to clamp around the body, holding insulation-material in place, so the filament drier is more efficient and can be used at colder outside temperatures. Test printed with pla - holds up…
- Downloads
- 14
- Likes
- 6
- Rating
- 0
P
PrintablesKartan
T Boxx Sortimo Inserts 1x1 1x2 Label
T Boxx Sortimo Inserts with angled surface for labeling. Feet snap in.
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
Walther ProSecur Pepperspray 53ml Holster
Belt holster for Walther ProSecur Pepperspray 53ml
- Downloads
- 13
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
paintball empire sniper double springfeed
paintball empire sniper double springfeed need: 2x BT SA-17 magazines ( identical to trracer / empre sniper) 2x detents m4 threaded rod - intended to be used with deadlywind barrels / front clamp is only optional
- Downloads
- 13
- Likes
- 3
- Rating
- 0
P
PrintablesKartan
90° shower head holder
Holds the shower head in a steep usable angle - made for hansgrohe furniture.
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesKartan
Wera Kraftform Kompakt
Handle for a Wera Kraftform Kompakt Bit, screws in place, optional paracordloop.
- Downloads
- 10
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
dive tankholter wallmount
Mount to secure dive tanks 10 / 12l d100mm to 200+ mm Uses 50mm webbing gear like old divebelts + optional m8x100 screwsMount to secure dive tanks 10 / 12l d100mm to 200+ mm Uses 50mm webbing gear like old divebelts + optional m8x100 screws
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
Calfstretcher
Calf stretcher with rubber feet and m12 weightsCalf stretcher with rubber feet and m12 weights
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
Irobot charging station holder fixture
wall mount for a Irobot charging station
- Downloads
- 6
- Likes
- 2
- Rating
- 0
P
PrintablesKartan
ISO-Fix Top tether hook loop fiat
mount for ISO-Fix / Top tether for fiat 2 parts/ mirrored for hooks and bungee
- Downloads
- 4
- Likes
- 1
- Rating
- 0
P
PrintablesKartan
shower shelf storage hansgrohe
shower shelf storage for hansgrohe furniture clips on, no supports needed
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesKartan
Bambu P2S Poop Chute toolfree clipon
P2S Poop Chute hanging off the external spool mount.
- Downloads
- 2
- Likes
- 1
- Rating
- 0
P
PrintablesKartan
Longhose Retainer
Longhose Retainer for diving / longhose retention on normal dir webbing.
- Downloads
- 2
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
keine werbung tag shield
Tag reading “keine werbung” 2 piece design, no support / no multicolor
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
PrintablesKartan
Scuba FourthElement Dive mask strap buckle
Buckle to use straps on FourthElement Dive masks replaces original buckle, mounts with m4 hardare or zipties
- Downloads
- 0
- Likes
- 0
- Rating
- 0
These are all currently available results.