Counting matching models…
I received a lot of positive feedback for my Moai eyeglass holder model. So I decided to make a low-poly version of it. It gives a more modern-art look to the classic model. For printing, 0.2mm layer height, with 2-3 walls, with 20% cubic…
This is a remix of https://www.thingiverse.com/thing:3858358 I've fixed some overhang problems to make printing it supportless more smoothly. Infil isn't necessarily needed. But adding infill will give some weight to it, which is better…
PLA works ok. PETG will be better. 100% infil will give you the best strength.
A remix of thing:4441093 which I optimized to be printed on FDM printers. The built-in supports from the original which were optimized for SLA printing was removed, and the mesh was slightly optimized to print faster. I have had good…
This is a remix from the excellent and highly detailed model by Burning_Bridges : https://www.thingiverse.com/thing:3067279 The original obj file was not printable as-is. So, I did extensive repair to it to make it printable. I have also…
This is a remex of the excellent model by David Metlesits and FleetPrinter: https://www.thingiverse.com/thing:4614314 I have made it more easier to assemble by re-splitting it into parts and adding alignment pins so that the parts go…
This is a remix of https://www.thingiverse.com/thing:3646996 I have modified it to use a 40x20mm fan, instead of the 40x10 fan from the original. Tested with a Noctua NF-A4x20 FLX fan. For best results, print on it's side with…
This is a remix of the designs from: https://www.thingiverse.com/thing:4740250 https://www.thingiverse.com/thing:4966561 https://www.thingiverse.com/thing:4749419 I have updated the following: Updated the components to work with the Biqu…
A remix of the Matchstick Diffusers to fit on to the bed of a Voron V0 (120mm x 120mm). The main body of the diffuser is split into two so they fit on the V0 or similar size bed. For the rest of the BOM, please refer to the original…
The original URBI (Upper-Rear Bowden Inlet) is great, but unfortunately does not fit on a V0 bed for printing. As this should ideally be printed with ABS, of you only have a Voron V0 you were not able to print this. I have split the model…
This design was directly inspired by the following models: https://www.thingiverse.com/thing:5215348 https://www.thingiverse.com/thing:5044453 https://www.thingiverse.com/thing:4877400 The standard BLV Linear Rail conversion kit for Ender…
This is a magnetic coupling for connecting PTFE bowden (or reverse-bowden) tubes together. Use this to have quick-disconnects between the printer and filament drybox etc. The built-in threads are M6, so you can use the common PC4-M6…
I liked the original 2020 3 way corner brace with cutouts for the plexiglass, and wanted to make a version for the front door panel of my enclosure. The cutouts in the braces allows fitting the plexiglass without having to cut a notch in…
The original design by used Jarom Efler from Thingiverse (thing:2419424) was great. But it only supported 2 boards. I remxed this version that supports 3 cutting boards using Tinkercad. I suggest PETG with 100% infill for better rigidity.…
A quick way to test your printers overhang and part cooling capabilities.
The original fan duct performed well, but I've had issues with it deforming over time due to heat. So, I created this version with 0.2 additional thickness in the walls.
Here is the voronoi style version of my Moai Eyeglass Holder. I used the following print settings: Layer Height: 0.12mm Initial Layer Height: 0.2mm Wall Loops: 3 Infill: Gyroid 15% Support: No
An ‘Ambigram’ are words that can be read from left to right, upside down or from multiple viewpoints. The "Illuminati Diamond" ambigram appears in the book and the moview ‘Angels & Demons’ by Dan Brown. It consists of 4 words, “Earth”,…
Updated Joystick sensor mount for the “Space Mushroom” 3D mouse. I added clearnce for the protruding solder ponts in the back of the joystick sensors. Please check the original model…
This is a simple coin bank shaped like a blood droplet. Therefore, a 'Blood Bank'. Print in red for the best effect. The default size is 80mm x 80mm x 110mm This should print without any supports or rafts.
I wanted a mock Steam Deck to test out some stand designs. The official model was too big to fit onto my Ender 3 Pro buld plate. Therefore, I split the model into 3 parts that can fir onto the build plate. These are modified files of the…
With the Mellow Fly Gemini v3 board in Voron 0.2 (such as in SIBOOR v0.2 Kit) the USB cable for the screen connects with a tight bend. This adapter allows easy plugin of the cable with clearance for the panels and the Wi-Fi adapter.
This is a remix of the thing https://www.thingiverse.com/thing:4395926 I have fixed the top corners of the model to be able to successfully print without any additional support. Print Settings Printer Brand: Creality Printer: Ender 3 Pro…
These are all currently available results.
